Ok I need your Ideas

[ldzielak]

Well I see 1 problem, when you return pump fails or turns off, you drain your entire tank to the lowest hole in the return line. What I did is have the return line come all the way up above the surface of the water and then go back down. I also have a small bleed above the surface to break the vaccum when the pump shuts down. Also I have been told that you should have lots of surface movement toward you overflow(s) to get the best protein skiming action.

Return lines from tank level:


Return Lines from top:


Over flow towers:


Tank on the adjustable stand during construction:


My sump and refugium:


[ 09 December 2001: Message edited by: Lee ]