Help: SPS bleaching and STN

[Myka]

Originally Posted by ChizerBunoi

What do you think? Will this look tacky? My SPS will then be about 6" from the surface.

Yeah, it probably will. If you don't have something laying around you could use (like a cheap Koralia that you can put the back magnet into the overflow) then just try the RO. Your SPS are fairly small still, so it may not be a flow issue. As they grow you're probably going to get some trouble. If you see a good deal on an MP40 I would probably pick it up if I were you and replace two of the MP10s with one MP40.

I am going to buy a RODI unit from BRS. Just looking at the cost of RO in my city, it's going to be $40 just to do a 40 gallon water change. That's not including the ATO water of 15 gallons a week.

Ouch. Yeah, that's a good plan. Talk to someone in your area that knows RO/DI systems really well to figure out which filters types work best. Here in Saskatoon we have chloramines to worry about, in Alberta I know many areas have really high iron content. I have no idea how that may or may not affect RO/DI systems. If you don't know a fish RO/DI expert, ask a drinking water company and just tell them you're looking at options for drinking water. They will tell you what you need for stages, and then buy it at BRS for 1/4 the price.

I am thinking it was a combination of ALK ( initially at 7 and then I slowly raised it to 8), and bad water quality. Lesson learnt, listen to people's advice as they have been there, done that.

I don't think it is the alkalinity. Tanks that run biopellets are prone to RTN if the alkalinity is above 8 dKH. Zeovit tanks are also supposed to run around 7 dKH. Natural seawater averages around 7 dKH. My reefs both run 7-8 dKH.