I used the same Silicone on my tank but in black.
Looks great 
I see you put your sides on your bottom. I did this as well but read later that most people put the bottom up 1/4" and let the sides take all the pressure. Do you have any thoughts on that??
Also I found that after a few days of drying that you could see some of those air crack lines. I had less on my second tank I glued up but left the clamps on longer. Any thoughts on this?? I also had all my edges polished as they told me on thick glass it was hard to get it lump free. This might be why though. Would be interested in how yours look on the seam after about 3-4 days. Are you going to edge the sides with something to make the glass edge look better?
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller
180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return.
|
03-28-2008, 11:41 PM
Threaded Mode
