shiny Aluminum

[ruck'n'reefer]

I'll take the 2x4 piece if it's left (if it can be brought over with Andrew's)

[Silverfish]

Steve.. a piece 12" x 24" would be great for me. I have sweet Wiss snips to cut it up like butter.. and I can brake it up into any shape you want. I also can roll the sheet metal if you want that smooth look. Anyone want to place an order on bending the shiny stuff up, let me know, I'm really affordable [img]images/smiles/icon_biggrin.gif[/img]

[StirCrazy]

oh sure now your just confusing me LOL
now I don't know how I want it.
by rolling do you mean it would all be curves instead of angles? I am going to have to figure this out now...

Steve

[ 17 January 2002: Message edited by: StirCrazy ]

[Silverfish]

You could go for a combination of the two and get real fancy [img]images/smiles/icon_biggrin.gif[/img]

[StirCrazy]

hey bruce how hard would it be to make something like this and stay only 24" wide


Steve

[ruck'n'reefer]

Bruce: If there is any al. left, I would like a bend or 2. [img]images/smiles/icon_biggrin.gif[/img]

[canadawest]

Well considering I'm just going to be lining the inside of my canopy with the stuff, no real bending required. Perhaps just a 4" piece along the 60" length bent at a 90^ for the back edge? The remaining 20" is just going to lie flat along the top of my canopy.

(Sure wish I knew if I was getting my MH retro or not, then I'd ask for some more custom bending to accomodate the MH lamps) [img]images/smiles/icon_confused.gif[/img]

[Silverfish]

Geez Steve, I sense a real market here for these things [img]images/smiles/icon_biggrin.gif[/img]

When you get the metal you will just have to come over and we can practice on some scraps of tin I have lying around the shop. We can get rather creative I think.

No problem Rob, just let me know what you need.

[StirCrazy]

ok now the only problem I seeis it may not be here in time for the meating if it is on the 26th. the guy said about 1 week so for theout of towners if it isn't here in time how are we doing this? is there anyone who travels back and forth between the mainland and the island frequently?

Steve

[Axial Corillite]

Steve you should knock of the spider light reflector. I'v heard it can reflect up to 30% more light with that configuration.I'f you make some let me know you could sell them at the store. [img]images/smiles/icon_smile.gif[/img]