#1
|
|||||
|
|||||
Bean animal plumbing help
Hey so if I am correct, for a bean animal overflow the secondary drain is in effect a Durso standpipe. Im guessing there's a special bit to "tap" the cap so I can get a JG fitting on to connect 1/4" tubing?
Here's a pic of the overflow. The center drain is the secondary Durso. At the moment there's no standpipe on the main drain ( it's just the bulkhead on the bottom right of overflow box) I do have a cap that will go on the top of the Durso. Which is what needs the tubing to be attached to, correct? Sent from my SM-G955W using Tapatalk
__________________
- S H A O - |
#2
|
|||||
|
|||||
Should be 1/8 pipe.
You need a 1/8-27 npt tap and an 11/32 drill bit |
#3
|
|||||
|
|||||
|
#4
|
|||||
|
|||||
Gee, I have a whole box of those in my kid’s closet. I think this is one plumbing job I can manage myself!
|
#5
|
|||||
|
|||||
Shao, I have all the tools here if you don't. PM me if you don't still have my cell # and we'll set up a time for you to bring over your cap and fitting.
|
#6
|
|||||
|
|||||
Looks like it's going to be 1/4npt. Pick one up at J&L and I'll help you with the thread.
|
#7
|
|||||
|
|||||
Good to finally meet you bud
|