|
|
|
#11
07-08-2005, 06:11 AM
|
|||||
|
|||||
Hey Ruth.....
Welcome to the board....  If you have a float switch in your sump or in your tank this can be wired to a relay box with a 3 prong plug you can use for a pump or a sevo valve that will open and close a ro line (if you have a preasure tank on it) talk to NEWGUY he made and shipped a great set up to me at a very good price. good luck
__________________
Richard _______________________________________ My wife believed me when I told her it was only going to cost about $500.00. that was over two years ago and I'm still grounded..... 
|
|
#12
07-08-2005, 07:27 AM
|
||||
|
||||
|
Float type valves work well and are real easy. If you want the bling bling get one of these. Tunze Osmolator Universal 3155 http://www.tunze.com/usa/index.html?lang=en-gb (click on other components)
It keeps water levels pretty much exact. A bit spendy but a slick piece of hardware. I use a float valve in my RO/DI water top up storage (salt bucket) the Tunze pumps water from there to my reef. Also water can flow from my small salt bucket storage to a large rubbermaid for salt water make up controlled by another float switch. Dave
|
|
#14
07-08-2005, 04:17 PM
|
||||
|
||||
|
Have a Look here.
Hi Ruth
Have a look at this. http://www.californiareefs.com/forsale.htm He does have setups for both sumps and tanks mounts. At least it will give you an idea on what you want or need. Dave.
|
|
#15
07-08-2005, 04:23 PM
|
||||
|
||||
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
