Krylon fusion

[Jaybone]

Hi reefers! Im setting up a new tank and I painted my overflow box with the Krylon fusion waited a month or so to let it dry.I put water into the tank and I can smell the paint still. Does anyone know if the smell is going away and how long I have to wait before I can put my tank upstairs? Please thanks

[ckmullin]

can you put it in the sun to bake it?

[Jaybone]

No because it's full of water rightnow and it's in the garage running, I can't bring it upstairs because of the smell so strong. Is there any other way or wait more time do you think?

[Kryptic4L]

a month ?? has the tank been sitting in the garage the whole time and is your garage heated ? just wondering if it may be temperature related just did a eggcrate sheet 2 weeks ago and it only faintly smells

[Jaybone]

No my garage is not heated and it's cold actually lol

[Kryptic4L]

the other thing you could try but its messy as heck is get some baking soda and a bit of water and paint it over the paint. let it sit for a day or two and wash off.

this is the method i used to get the plastic smell out of a wine fridge when i was making a humidor

[Kryptic4L]

i think almost all paint needs over 16 degrees to cure properly. more time in the cold may not help it

[Jaybone]

That's probably why it's smell strong still not cure properly. The problem is I already silicone my overflow box on the glass and I'm running it with water rightnow.anymore solution into this please? Lol thanks very much everyone

[monocus]

drain the water to expose the overflow and direct a heater at the overflow

[Jaybone]

I'll try that drain the water then direct the heather thanks very much everyone