![]() |
|
#1
|
|||||
|
|||||
![]() I'm pondering the best way to hang my MH's and I'm wondering how close is too close for the ends of two 400W MH bulbs if they're pointing at eachother.
O________ ________O The O's represent the socket assembly and the flat lines represent the bulbs in case you're wondering about my prehistoric drawing. Thanks.
__________________
Jason |
#2
|
|||||
|
|||||
![]() I'm thinking that so long as they don't touch and with adequate ventilation/fans, it would be fine. Just my guess though.
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#3
|
||||
|
||||
![]() I would try to have some gap between because they are both very hot & having two hot bulbs giving each other excess heat doesn't sound like it would be good for them. I would want several inches between bulbs at least, especially with 400 watters. JMO.
Anthony
__________________
If you see it, can take care of it, better get it or put it on hold. Otherwise, it'll be gone & you'll regret it! |
#4
|
|||||
|
|||||
![]() You could probably get away with having them a bit closer together if you have some airflow in there using a fan.
|
#5
|
||||
|
||||
![]() Make sure you leave enough room to change a bulb.. ha ha
|
#6
|
|||||
|
|||||
![]() I've always found that when the fish pull out the sunglasses and suntan oil your lights are too close together.
![]() ![]() ![]() ![]() ![]()
__________________
250 gal display tank plumbed directly to my wallet |