Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Reef

Reply
 
Thread Tools Display Modes
  #1  
Old 10-02-2006, 03:31 PM
howdy20012002's Avatar
howdy20012002 howdy20012002 is offline
Member
 
Join Date: Nov 2005
Location: Edmonton
Posts: 1,437
howdy20012002 is on a distinguished road
Default question about remora skimmers

I have a remora aqua C skimmer in my SH tank and sometimes it foams great...then an hour later, it is doing nothing..then a few hours later foam again.
Any ideas on why it is so sporadic?
I have a maxijet 1200 on it..am I pushing too much water?
I also don't have a air hose on the maxijet, should I have one so to increase the air bubbles?
thanks in advance for any help
Neal
__________________
Way too much time and money has gone into this hobby....and yet, I CAN'T STOP
Reply With Quote
  #2  
Old 10-02-2006, 05:13 PM
mr_alberta's Avatar
mr_alberta mr_alberta is offline
Member
 
Join Date: Apr 2003
Location: Edmonton, AB (University Area)
Posts: 2,506
mr_alberta is on a distinguished road
Default

If you don't have a venturi on the Maxi-Jet, how is the skimmer making foam?
__________________
32"x32"x20" Cube-ish tank
Reply With Quote
  #3  
Old 10-02-2006, 05:22 PM
howdy20012002's Avatar
howdy20012002 howdy20012002 is offline
Member
 
Join Date: Nov 2005
Location: Edmonton
Posts: 1,437
howdy20012002 is on a distinguished road
Default

i really don't know to be honest. I bought it used and it didn't have air hose on the pump..so I didn't put one on it.
I know that on my other bigger remora skimmer in my 90 g, I don't have a air hose either. I have a bigger pump on that one...(not sure what type)
that one works fine without a air hose.
So are u saying that I need a air hose on the pump?
It does create bubbles at times.
__________________
Way too much time and money has gone into this hobby....and yet, I CAN'T STOP

Last edited by howdy20012002; 10-02-2006 at 06:07 PM.
Reply With Quote
  #4  
Old 10-02-2006, 06:05 PM
fresh fresh is offline
Member
 
Join Date: Dec 2003
Location: Langley, BC
Posts: 162
fresh is on a distinguished road
Default

you don't need an air-hose to the pump... The design of these skimmers doesn't require ventury and air hoses... which is one of their advantages.

They work by thrusting water through a small openning and that is what creates the froth/bubbles/foam/etc.
Reply With Quote
  #5  
Old 10-02-2006, 06:11 PM
ryanfish's Avatar
ryanfish ryanfish is offline
Junior Member
 
Join Date: Aug 2006
Location: Winnipeg, MB
Posts: 12
ryanfish is on a distinguished road
Default

It creates bubbles via a spray injector (i think). I have a remora pro and it stops skimming whenever I put my hand in my tank, when feeding or adding kalk or magnesium. Takes about 10 minutes to an hour to start up again. If it takes takes to long to bubble or doesnt bubble at all then try lowering the collection cup or try cleaning the spray injecor with the brush it comes with (pipe cleaner)
Reply With Quote
  #6  
Old 10-02-2006, 06:14 PM
howdy20012002's Avatar
howdy20012002 howdy20012002 is offline
Member
 
Join Date: Nov 2005
Location: Edmonton
Posts: 1,437
howdy20012002 is on a distinguished road
Default

thanks for the help
I didn't know that I could actually clean it
I will try that tonight
thanks again
Neal
has anyone tried putting a airhose on the pump? would this make it work better?
__________________
Way too much time and money has gone into this hobby....and yet, I CAN'T STOP
Reply With Quote
  #7  
Old 10-02-2006, 07:20 PM
OCDP's Avatar
OCDP OCDP is offline
Member
 
Join Date: Oct 2004
Location: Calgary
Posts: 2,347
OCDP is on a distinguished road
Default

Neal, I would say clean the skimmer's spray injector well.. and clean the maxi-jet. This helps so much.. also, I would not run any air hose. Just leave it be, these skimmers are very effective (at least IMO..) Just keep everything the way it is... and give the whole unit a good clean. When I clean my pump and injector I get nearly a cup of skimmate a day. (wet)

Also, Remora's are pretty notorious for crapping out for an hour or so after hands are in the tank, after feedings, dosing (as mentioned), etc, etc.. but IME it only stops producing skimmate for an hour or so.. depending. If you feed heavy, expect a little longer in delay. I know when I put a bit of garlic extract on my mysis, it stops working for a couple hours.

Overall, a sweet HOB skimmer, works very well for the price, and has such low maintenance. I have been using mine for a couple years now... not a single complaint. I have never had one problem with mine either..

It's all in the maintenance.. keep the injector and maxi-jet clean and it willl work like a charm.



Anywhoo...
__________________
20g BB Mixed Reef // Coralife 150w HQI // AquaC Nano // Koralia 1 & Seio 820 // Jager 200w // AC50
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 07:36 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.