Skimmer Questions!

KrazyKuch · #1 03-24-2005, 09:43 PM

Were is the best place to buy a Beckett Nozzle....I am building a beckett skimmer but don't know were to find a beckett nozzle.....Also How much do they run for approx?

Corey · #2 03-24-2005, 11:00 PM

Canadian Tire has them for 14.99

kari · #3 03-24-2005, 11:38 PM

The crappy tire one is a knock-off of the Beckett foaming fountain nozzle I believe. The OD dimensions are the same on the ends yet there is a slightly smaller ID on the inlet end. Just tried one on a Little Giant-4 and it works very well IMO. Maybe the Beckett version will hit the shelves at Rona or HD this month, maybe.

Aquattro · #4 03-25-2005, 12:57 AM

Quote:

Originally Posted by kari

Maybe the Beckett version will hit the shelves at Rona or HD this month, maybe.

My understanding is the Beckett line of pond foamer has been discontinued, so we're not likely to see them back. The knock offs should do a fine job though...

KrazyKuch · #5 03-25-2005, 01:24 AM

sounds good!!Thank you very much!

medican · #6 03-25-2005, 04:34 PM

try this......

http://barraquatic.com/access.php

mr_alberta · #7 03-25-2005, 04:36 PM

I think you can get a beckett with a pre-built PVC housing on ebay.

KrazyKuch · #8 06-19-2005, 03:26 AM

What is the size of the opening needed for a beckett to sit in??

i.e how tall is it without measureing the two ends where it gets attached if that makes any sense!!

medican · #9 06-19-2005, 03:13 PM

Try this

http://reefcentral.com/forums/showth...34#post1030034

KrazyKuch · #10 06-19-2005, 04:44 PM

I couldn't find the measurements that I needed in any of that!!!