|
#1
|
||||
|
||||
Co2 scubber
So where does everyone buy their media for the scubber a dive shop or LFS? And what shop? I'm in the lowermainland so closer or no shipping would be ideal. Thanks
|
#2
|
||||
|
||||
if you are on R2R. look at the thread called bubbas SPS journey. its super long but somewhere from page 170+, there is a bunch about the media and I believe where they order it from. they are in the states and you will more than likely have to order it from the US to get a decent amount for the $$$. i know brs sells it but these guys on R@R have found it else where. Good Luck and if you get it up and running, you will have to let us know the results!
|
#3
|
||||
|
||||
Quote:
Thank you thou |
#4
|
||||
|
||||
HI ReeferLuke. Can you share the local source? I may be interested...
Thanks! |
#5
|
||||
|
||||
Any diving shop will carry it, it's soda lime that is used in rebreathers.
|
#6
|
||||
|
||||
Mite want to try these guys
|
#7
|
||||
|
||||
Haha buddy way ahead of ya. Will be here next week. Cheap and super easy
|
#8
|
||||
|
||||
So got my 5 gal pail of CO2 absorbant from The Steven's company. It took about 3 weeks to get in. Not bad I thaught.
So I set up a old TLF reactor I had. I'm still drawing air from outside. My Ph went from 7.78-8.02 on average up too 8.00-8.11 on average after 1 day. I will watching to see how long each reactor full will last. But at aprox 500ml per reactor and 5 gals of co2 absorbant it should be 5 or 6 months worth I'm hoping. So far I'm happy |
#9
|
|||||
|
|||||
Did you set the reactor up to recirculate? This reduces media replacement significantly.
I just put mine back online to get the pH above 7.8. It’s not helping I need to figure something else out. |
#10
|
||||
|
||||
Quote:
I also use a air pump with two air stones in my sump for more oxygen again I will take this offline and see if it makes a difference. So far my ph stays around 8.01 up too 8.15 which is alot better then before. |