Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Product Review and Equipment Forum > Filtration and Skimmer Specific

Reply
 
Thread Tools Display Modes
  #1  
Old 09-27-2014, 04:54 PM
ColinD ColinD is offline
Member
 
Join Date: Sep 2008
Location: Calgary AB
Posts: 116
ColinD is on a distinguished road
Default Skimmer pump stops and restarts constantly

So I have a BM NAC5e skimmer, replaced the stock pump with the 'Rock (SP2000) pump' last year, ran great for a couple months and then started to constantly turn off and restart (seemed like every 10 minutes or so). Ran very hot as well, pump housing eventually started to crack and leak so I pulled the skimmer and ran skimmerless for a few months. Decided last month to order another pump and start up the skimmer again, guess what? Its doing the exact same thing, am I doing something wrong? Skimmer runs longer between turning off and restarting 90 minutes or so. Is it possible I got another bad pump?

There's no siphon break or anything like that, skims great when its running.

Colin
Reply With Quote
  #2  
Old 09-27-2014, 05:04 PM
The Guy The Guy is offline
busy with fresh water.
 
Join Date: Dec 2011
Location: Kelowna, BC
Posts: 1,041
The Guy is on a distinguished road
Default

Quote:
Originally Posted by ColinD View Post
So I have a BM NAC5e skimmer, replaced the stock pump with the 'Rock (SP2000) pump' last year, ran great for a couple months and then started to constantly turn off and restart (seemed like every 10 minutes or so). Ran very hot as well, pump housing eventually started to crack and leak so I pulled the skimmer and ran skimmerless for a few months. Decided last month to order another pump and start up the skimmer again, guess what? Its doing the exact same thing, am I doing something wrong? Skimmer runs longer between turning off and restarting 90 minutes or so. Is it possible I got another bad pump?

There's no siphon break or anything like that, skims great when its running.

Colin
Did you change out the pinwheel impeller as well, if not it may the problem or you possibly just got a another bad motor, but unlikely.
__________________
Hey! I never "LEFT" the hobby, just doing fresh water now. Which is still listed as part of Canreef if I'm not mistaken.
Reply With Quote
  #3  
Old 09-27-2014, 05:15 PM
ColinD ColinD is offline
Member
 
Join Date: Sep 2008
Location: Calgary AB
Posts: 116
ColinD is on a distinguished road
Default

Quote:
Originally Posted by The Guy View Post
Did you change out the pinwheel impeller as well, if not it may the problem or you possibly just got a another bad motor, but unlikely.
New pump came with a new impeller, might put the old one in just to see.

Colin
Reply With Quote
  #4  
Old 09-27-2014, 05:37 PM
eli@fijireefrock.com's Avatar
eli@fijireefrock.com eli@fijireefrock.com is offline
Vendor
 
Join Date: Jan 2002
Location: calgary
Posts: 1,758
eli@fijireefrock.com is on a distinguished road
Default

If the problem is happening after couple of month running...very possible calcium deposit on the inside of the pump...take the pump to a bucked of water and vinegar run it for 15 minutes then wash and try
Reply With Quote
  #5  
Old 09-27-2014, 05:52 PM
matt_C's Avatar
matt_C matt_C is offline
Member
 
Join Date: Nov 2013
Location: Calgary
Posts: 180
matt_C is on a distinguished road
Default

Maybe you have stray current in the tank. Maybe a grounding probe.

Only thing we can do its make suggestions.
Reply With Quote
  #6  
Old 09-28-2014, 01:45 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

Quote:
Originally Posted by matt@concept View Post
Maybe a grounding probe
Of course, before adding a probe one should check for stray voltage with a multimeter as adding a probe without knowing what's going on can be very dangerous, and possibly harmful or deadly to both yourself and your critters
If you do have stray voltage, adding a grounding probe will give it a path to ground. This is not good unless you have a GFCI

With a multimeter set to 120VAC, put the red (positive) probe in the tank water and the black (negative) probe into the d-shaped socket in any outlet

If you do find current in your tank, unplug one piece of hardware at a time until you find the culprit

Any current above a couple volts should be investigated, but sometimes you can get a reading just from lights above water creating a 'field' (for lack of the proper term)
Reply With Quote
  #7  
Old 09-27-2014, 08:54 PM
ColinD ColinD is offline
Member
 
Join Date: Sep 2008
Location: Calgary AB
Posts: 116
ColinD is on a distinguished road
Default

Quote:
Originally Posted by eli@fijireefrock.com View Post
If the problem is happening after couple of month running...very possible calcium deposit on the inside of the pump...take the pump to a bucked of water and vinegar run it for 15 minutes then wash and try
I've only been running the skimmer since last Tuesday (after I got back from vacation) Prior to leaving on vacation I ran it in a bucket of water with vinegar to clean any impurities from it.

Curious Matt, how would stray voltage effect the pump, it is external or am I missing something? I have noticed a few corals not doing so well the last few days, zoas not opening and some STN in a few acros. Only other thing I've done to the tank recently is switched out a Maxi jet powerhead for a korillia that I had sitting around

Colin
Reply With Quote
  #8  
Old 09-27-2014, 09:34 PM
matt_C's Avatar
matt_C matt_C is offline
Member
 
Join Date: Nov 2013
Location: Calgary
Posts: 180
matt_C is on a distinguished road
Default

Water connects voltages.

Do you get shocked at all when you stick your hand in the water?

Had a hang on the back skimmer that had the same problem.
Put a grounding probe on and went away.

Turns out to be an old korillia pump i had.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 02:09 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.