|
#1
|
|||||
|
|||||
Vernon Water Quality
Just a heads up for Vernonites. I live in the Mission Hill area & just found out thru the local newspaper that our water source has been switched from Kal Lake to the Duteau Creek source due to turbidity issues from Kal Lake. It's a good time to fire up the RODI system! The last time I measured my tap water on the Kal Lake source the TDS was over 210. I just checked my tap water 5 minutes ago & the TDS was 54. Seems the megabucks spent on the Duteau water plant is paying off. If you wish to do your RO membrane a favour, run the system now, before they switch back to Kal Lake.
__________________
Mike 77g sumpless SW DIY 10 watt multi-chip LED build http://www.canreef.com/vbulletin/showthread.php?t=82206 |
#2
|
||||
|
||||
thanks Mike, I tested mine about a month ago and it was 240, just tested again and is 73
|
#3
|
|||||
|
|||||
Yes, good news, our property tax $$s at work. I guess the higher than average snow pack, rainfall etc. are affecting water quality in the lake. Kind of makes me a slight tad less upset about the 17% increase in water rates this year. We're approaching the TDS numbers the folks on the west coast enjoy.
__________________
Mike 77g sumpless SW DIY 10 watt multi-chip LED build http://www.canreef.com/vbulletin/showthread.php?t=82206 |
#4
|
|||||
|
|||||
Not to rub it in but, mine is 8 again today. Good thing too as I'm finally filling the system
|
#5
|
||||
|
||||
What .... Mine is 12 in Richmond.
|
#6
|
|||||
|
|||||
B%%$$stards! You guys even need an RO system??
__________________
Mike 77g sumpless SW DIY 10 watt multi-chip LED build http://www.canreef.com/vbulletin/showthread.php?t=82206 |