|
#1
|
||||
|
||||
RBTA dying???
the RBTA I got two weeks ago decided to detached itself today from the rock. While is off the rock, I decided to quickly look at it's month. and found there's white stringy thing coming out from its mouth, almost looks like it's the part of the organ.
it's still fully inflated, and re-attached to the rock just fine. dying or splitting?? thanks |
#2
|
||||
|
||||
rbta
age of system,parameters,flow,livestock,light all this will help in diagnosing the problem
__________________
Back in the saddle again . running a borrowed 65G peninsula while i get my 48"x48" centre overflow cube built. |
#3
|
||||
|
||||
8 months old, SPS tank. corals are happy.
yellow tang, powder brown, kole tang, fire fish, 6 line wrass. cleaner wrass, cleaner shrimp. 2 X 150w MH, 4X54w T5. mp40 X 1, korollia 750GPH evo X1. ca reactor, vertex in-100. ph. 8.1 kh 11 Ca 380(boosting it up) mg 1300 |
#4
|
||||
|
||||
parameters
amonia,nitrite,nitrate? so far all seems ok sometimes clownfish help with anemones
__________________
Back in the saddle again . running a borrowed 65G peninsula while i get my 48"x48" centre overflow cube built. |
#5
|
||||
|
||||
ammonia 0
nitrite 0 nitrate 0 a least low enough that I can't tell if there's any on the colour chart. all 3 clowns are trying to host in the same anemone.
__________________
150DD mix reef with 90 gal sump and 40gal frag tank purple tang, sohal tang, yellow eye kole tang, fairy wrasse. cleaner wrasse, leopard wrasse, and misc fish. GHL Mitras 6200HV X 2, MP40 X 2, MP60 X 1, tunze 6095 X 2, Vertex RX6 calcium reactor, Bubble King SM250, Aquamaxx bio pellets reactor, Profilux 3 |
#6
|
||||
|
||||
rbta
i would say probably just stressed keep an eye on it for a few days to a week to see if it gets any better , if the clowns are trying to host it thats a good thing they tend to get a distance away from them if they are dying
__________________
Back in the saddle again . running a borrowed 65G peninsula while i get my 48"x48" centre overflow cube built. |