![]() |
|
||||||||
| Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
|||||
|
|||||
|
So around midnight my RP quit. I unplugged it. And took apart to clean thinking something may have been in there. But it was clean. Just a bacterial film on it.
Tried different setting but all it does I'd turn slow about 6x and stops. Any idea |
|
#2
|
|||||
|
|||||
|
I'd return for warranty, I've had two of these pumps seize up on me as well.
|
|
#3
|
|||||
|
|||||
|
Make sure you can grip the front disc of the impeller assembly and you can freely turn the magnetic shaft. Mine siezes all the time I hate it.
Last edited by lastlight; 11-30-2013 at 05:24 PM. |
|
#4
|
|||||
|
|||||
|
It's not seized.
Hoping it's just the contoller |
|
#5
|
|||||
|
|||||
|
I've had power supplies and controllers fail as well so for sure could be the issue but the controller wouldn't lite up at all for both failure modes.
|
|
#6
|
|||||
|
|||||
|
How old are your pumps ?
__________________
360 gallon sps reef, 180 gal sump, bubble king supermarine 300, 4xmp40Wes, 2 x 6215 tunze waveboxes, 4 ghl mitras 360 Reef Tank |
|
#7
|
|||||
|
|||||
|
The controller lights up.
I test a controller a while ago that would show it was working but wouldn't bump up the pump. On way to lfs so we will see |
![]() |
| Thread Tools | |
| Display Modes | |
|
|