![]() |
|
View Poll Results: What Salt are you using | |||
Kent |
![]() ![]() ![]() ![]() |
25 | 7.27% |
Instant Ocean |
![]() ![]() ![]() ![]() |
196 | 56.98% |
Oceanic |
![]() ![]() ![]() ![]() |
5 | 1.45% |
Ocean Pure |
![]() ![]() ![]() ![]() |
9 | 2.62% |
Ocean Pure Pro |
![]() ![]() ![]() ![]() |
29 | 8.43% |
Tropic Marin |
![]() ![]() ![]() ![]() |
35 | 10.17% |
Reef Crystals |
![]() ![]() ![]() ![]() |
36 | 10.47% |
Sifto |
![]() ![]() ![]() ![]() |
9 | 2.62% |
Voters: 344. You may not vote on this poll |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||||
|
|||||
![]() Quote:
*EDIT* also that is mixed @ 1.023 (coralife deep 6 hydrometer) |
#2
|
|||||
|
|||||
![]() I'm using an Elos KH test kit (and verified by Salifert) to be 4kH @ 1.026
I'm buying a pal of TM tomorrow J |
#3
|
|||||
|
|||||
![]() when I mix ocean pure pro in a new batch at 1.025 salinity, I get 420ppm calcium, 7dkh ALK, 1550 mag. Sometimes I get around 6 dkh/380 calcium, so I just add a little two part using a calculator before-hand.
I test all my change water before adding it to the tank. I also make sure the water is aerated/heated for a day before I add the salt, then aerate/heat it for another day. I think quickly heating the water while dissolving the salt lowers it's levels, or adding it to freshly made RO/DI water is detrimental because of the high CO2 content causing an out of whack pH. Plus it doesn't hurt to do it the slow way ![]()
__________________
Everything I put in my tank is fully dependant on me. |
#4
|
|||||
|
|||||
![]() i just started using this stuff and get a Ca of 370 and alk of 6.2dKH. i emailed them telling them i was pretty disappointed that i have to supplement before i use it and they told me they'd send me a new bag.
__________________
Darryl |
#5
|
|||||
|
|||||
![]() Really, I would be very interested in your results from the replacment bag.
J |
#6
|
||||
|
||||
![]() I really like the kent sea salt
![]() my last bucket I tried seachem and I returned 3/4 of the bucket I hated it. was hard as a rock and even sitting in my mix for 48 hours it still wasn't desolved.
__________________
80g fluval FX5 (2) 300 watt tronic heaters T5HO dual ballast lighting (power glo, marine glo) --------- 10G Nano Fluval 404 power glo |
#7
|
|||||
|
|||||
![]() I use IO because it's the only brand sold in P.R. I'd like to try other brands but the freight kills me.
|
#8
|
||||
|
||||
![]() I started with I/O and am now trying T/m/Pro My tank is still in the early stages..5 months and counting but fish, corals and rock all seem to be looking good. I will be monitoring it regularly though and see whether the extra costs are wothwhile. Maybe I will go I/O in my predator tank and T/M in the reef..we'll see.
![]() |
#9
|
||||
|
||||
![]() Quote:
__________________
60 Gallon rimless, internal Herbie overflow, ATI Powermodule, Eheim 1250, 2X Tunze 6055, Tunze ATO, Euroreef RS100, Profilux controller, TLF Reactor. |
#10
|
|||||
|
|||||
![]() This poll is 11 months old. The salt I use didn't exist when it started.
|