Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Tank Journal

Reply
 
Thread Tools Display Modes
  #1  
Old 11-03-2012, 03:37 AM
ChizerBunoi
Guest
 
Posts: n/a
Default The Best of Both Worlds

The Best of Both Worlds


Welcome to my build thread and join me as I develop my basement for my little fishes. This build will feature a wall with two fish tanks. A high tech reef and planted tank.

Originally, I was planning to have two 90 gallon tanks. But I hate cleaning and reaching into such a deep tank. Therefore, I have decided to downsize them to shallow custom tanks with the following dimensions 48" x 18" x 18". Definetely something that I can manage. Plus, I won't get my armpits wet.


Reef
My focus is to have a SPS dominated tank which will eventually run zeovit. I just love these fuzzy sticks. Below is an image of what my current 90 gallon looks like now. I will be keeping the same type of aquascape but will add sand. I also intend to move some of the frags onto the rock (whenever I decide to buy some glue - lazy). I guess it's a mountain high, valley low aquascape.




Planted
This will be an Iwagumi aquascape with an auto drip water change setup for my discus. The discus are all still juveniles so it will be a while before I purchase this tank and set it up. I realize this is a reefing community so I won't go in depth with the planted discus tank. There will be photos from time to time though. Below is an image of where they used to live, before I shut this tank down and moved them to their current 40 gallon breeder.




This is what the setup looks like right now. Isn't that ugly or what?


This is the new feature wall. It is 9' so with both tanks, they should fit nicely. I have my old planted 90 gallon tank on the right side to show what it would look like. The new custom tanks will actually reach up to the bottom of the black trim on the tank.

Reply With Quote
  #2  
Old 11-03-2012, 03:49 AM
ChizerBunoi
Guest
 
Posts: n/a
Default

As you can tell, my basement is still undeveloped. My wife painted the feature wall so that we can get a feel for what it would look like. It's actually a very light blue color.

It will still be 2 or 3 weeks before we finish hanging all the drywall, plastering, painting and installing the laminate flooring.




The Stands
I purchased two of the same stands. They are actually bathroom vanity's that I will need to modify and reinforce to fit the sumps and to hold the weight of the tanks.



Access into the stands is very tight. I'm going to remove the drawers and they will simply be cosmetic. I have two choices: (1) to remove the entire front panel (my choice) or (2) to make the stand deeper so that I reach in there. I prefer to go with both options but we'll see how far I get.



Reply With Quote
  #3  
Old 11-09-2012, 03:06 AM
ChizerBunoi
Guest
 
Posts: n/a
Default

Onto the plans. The display (67 gallon) has an external coast to coast beananimal overflow. The drains will run 11 feet horizontally (on a slope) to a room nearby and into the main sump (30 gallon) that houses all the equipment and 3 filter socks.

This gets gravity fed into a refugium with a deep sand bed (90 gallon). Yes I changed my plans on the carbon dosing.

Then it goes into another 90 gallon which will house the ATO, W/C station, the rest of the live rock and the return pump. I will incorporate a drain for easy water change. I will also set it up so that I can easily fill the tank without the need for any hoses. The ATO will have a float switch to automate refilling.

The live rock will sit on a egg crate shelf so that detritus can be easily removed. Finally, I'm hoping to run this entirely off of a Eheim 1262. It will be pushing 11 feet horizontally.

Reply With Quote
  #4  
Old 11-10-2012, 10:01 PM
ChizerBunoi
Guest
 
Posts: n/a
Default

I'm looking for some advice.

1) The fish room will be in the space directly under my stairs. I am planning to drywall it to keep the dust from the furnace room (directly next to it) out. I plan to have glass lids on the two 90's, but not on the skimmer portion of the 30 gallon sump. Do I need to worry about humidity? I can put an air vent into the furnace room if that helps. Not sure if I need some fans to suck the air out.

2) Will the Eheim 1262 be able to handle a 11 foot horizontal push? It's also going up 5 feet and through about 6 x 90 degree elbows.

3) I have 4 drains holes on the external coast to coast overflow box. I was planning to do a beananimal, and use one hole for the return. They are 1" drains. Should I adapt the PVC to 1.25" pipe instead of the standard 1", and have that running to the sump?

Thanks for looking. Drywall is still about 80% done. This will still be a long one.

Last edited by ChizerBunoi; 11-10-2012 at 10:10 PM.
Reply With Quote
  #5  
Old 11-10-2012, 10:07 PM
ChizerBunoi
Guest
 
Posts: n/a
Default

The good news is that I got the tank. It's been curing in my dining room for the past week. Thanks Concept. James built an awesome tank.

Denny (never met you before) apparently boxed everything up so Dave could only find 3 bulkheads. There are 3 holes on the right and 1 on the left. I should have had them spread out more. Oh well.



This is a one piece acrylic background that was glued to the inside.



And finally, a custom hand cut overflow weir.

Reply With Quote
  #6  
Old 11-11-2012, 01:24 AM
Skimmerking's Avatar
Skimmerking Skimmerking is offline
acanthastrea freak
 
Join Date: Jun 2002
Location: Virden, Manitoba
Posts: 5,688
Skimmerking is on a distinguished road
Send a message via ICQ to Skimmerking Send a message via MSN to Skimmerking
Default

i like it
__________________
180 starfire front, LPS, millipora
Doesn't matter how much you have been reading until you take the plunge.
You don't know as much as you think.
Reply With Quote
  #7  
Old 11-11-2012, 03:44 AM
Arok3000's Avatar
Arok3000 Arok3000 is offline
Member
 
Join Date: Mar 2010
Location: Calgary
Posts: 94
Arok3000 is on a distinguished road
Default

Looking good, are you having Concepts building you an identical tank for your discus?
The Eheim 1262 has nearly 12' of head capability, so I think 5' with a few elbows should be fine.
Reply With Quote
  #8  
Old 11-11-2012, 03:17 PM
ChizerBunoi
Guest
 
Posts: n/a
Default

Thanks for the comments.

I most likely will go with Dave again for the discus tank. They are still small juveniles (less than 4 inches) so it will be awhile before they move to their new home. I'm also planning on having the exact same setup for the discus tank, except I will also incorporate two canisters to it. The sump will be a refugium for hornwort and auto water change.

The Eheim 1262 has to run 11 feet horizontal and up 5 feet total (gradual slope).
Reply With Quote
  #9  
Old 11-11-2012, 04:03 PM
The Guy The Guy is offline
busy with fresh water.
 
Join Date: Dec 2011
Location: Kelowna, BC
Posts: 1,041
The Guy is on a distinguished road
Default

I like your plans of what you are doing, keep the pictures coming, looks great so far.
__________________
Hey! I never "LEFT" the hobby, just doing fresh water now. Which is still listed as part of Canreef if I'm not mistaken.
Reply With Quote
  #10  
Old 11-17-2012, 01:55 AM
ChizerBunoi
Guest
 
Posts: n/a
Default

Okay the drywall is up and were onto the 2nd coat of drywall mud. Still 3 more coats to go before we can paint.

I decided to add more rock to the display. Let me know what you think.



My corals are still bleached and faded, still trying to bring the colors out.







I want to add a sand/crush coral substrate on the new tank, but I don't think I'll be able to keep it clean. There's just too much rock covering the sand. Also, my water flow inside the tank will be about 120x turn over.

Moving the sumps and refugium into the fish room has definitely given me lots of space under the stand. I'm going to keep the drawers in the stand. I bought the wood for it so hopefully I can reinforce it this weekend.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 11:29 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.