#1
|
||||
|
||||
Vertex puratek
So I bought the 100gpd model used and replaced all the filters.
Now the numbers are coming out at 0 ppm But the water coming out is painfully slow. Maybe 10:1 Waste to good. What is the problem? |
#2
|
|||||
|
|||||
Do you have good house pressure? (should be around 40psi)
Perhaps the booster pump is kaput. It need about 40psi inlet to boost properly. |
#3
|
||||
|
||||
Ya it seems to have good pressure 75psi
|
#4
|
|||||
|
|||||
What pressure is your running at, do u have a flow restrictor in the waste line ?
__________________
360 gallon sps reef, 180 gal sump, bubble king supermarine 300, 4xmp40Wes, 2 x 6215 tunze waveboxes, 4 ghl mitras 360 Reef Tank |
#5
|
||||
|
||||
The drain line has good flow. And the good water is dripping out.
Any other ideas? |
#6
|
|||||
|
|||||
But is the flow restrictor in the line did I change the water line when u set it up ?
__________________
360 gallon sps reef, 180 gal sump, bubble king supermarine 300, 4xmp40Wes, 2 x 6215 tunze waveboxes, 4 ghl mitras 360 Reef Tank |
#7
|
||||
|
||||
Sorry I'm not understanding what you are asking
|
#8
|
|||||
|
|||||
There should be a flow restrictor in the waste water line the vertex one is a small clear plastic piece that fits inside the 1/4 inch water line and its easily lost. With out it you will have tons of flow out the drain line. Only other issue I had was bad to membrane but I issume u changed yours .
__________________
360 gallon sps reef, 180 gal sump, bubble king supermarine 300, 4xmp40Wes, 2 x 6215 tunze waveboxes, 4 ghl mitras 360 Reef Tank |
#9
|
||||
|
||||
Where is the flow restricter located?
|
#10
|
|||||
|
|||||
Should be inside the waste water line. I see this post it might help or when I get back from the airport ill take pictures
http://www.3reef.com/forums/reef-aqu...tor-82812.html
__________________
360 gallon sps reef, 180 gal sump, bubble king supermarine 300, 4xmp40Wes, 2 x 6215 tunze waveboxes, 4 ghl mitras 360 Reef Tank |