A cool low tech way to suspend your ATI!

[PFoster]

I thought I would share this pic from a local hobbiest of a really cool way that you can suspend you ATI lighting for very cheap.





This is really simple and easy for you to do too.

Go to the electical section at your local hardware store.

Get a section of metal electrical conduit.

Bend it to around 90 degrees. Just make sure both are bent to the same angel.

Drill the pipe close to the end so that you can install the hanging kit.

Use a flat black spray paint on the conduit. Remember multiple thinner coats are better than fewer thicker coats.

Attach the conduit to the back of the stand with the appropriate brackets (again from the hardware store).

And thats it!
You have a cheap and easy way to hang your ATI!!