Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Reef

Reply
 
Thread Tools Display Modes
  #1  
Old 10-16-2013, 02:23 AM
Phanntom Phanntom is offline
Junior Member
 
Join Date: Feb 2013
Location: Moose Jaw, Sask
Posts: 17
Phanntom is on a distinguished road
Question Tank swap nuked tank

Story so far:

Did a tank swap 2 weeks ago and this is how i did it.
- took 50% of the water and put it in totes
- took the fish, rock and corals and put it in that water
- took the remaining water and sand and put in new tank
- but the rocks, fish and corals and water in new tank
- went from a 50 to 80 gallon tank so I added 30g of new water

Here was my mistake, i never washed the sand enough so I had a huge ammonia spike which killed all my inverts, coral and a few fish.

- I took the remaining fish and put them in my quarantine tank.
- I put the rock into totes (was washed, scrubbed and rinsed) and am leaving it there untill the ammonia goes down, doing water changes every 2 days.

I set my tank up as new, used new sand and water and 1 ten lb piece of new live rock.

Here is my question: How long should I leave the old rock in the totes before I return it into the tank and should I add it all at once or slowly? I like the rock in the totes as it is easier to do a water change in a 15g tote then a 80g tank..

I know i missed some important info so ask away and I will do my best to anwer.
Ammonia level at spike: to high to measure (over 4)
ammonia level of live rock now (before water change) around 0.6 (if i'm reading it correctly)

Thanks in advance for any and all info

Bill..
__________________
Bill.
SK, Canada
80g Reef Tank + 20g sump
Reply With Quote
  #2  
Old 10-16-2013, 03:13 AM
tim the toolman tim the toolman is offline
Member
 
Join Date: Feb 2011
Location: Edmonton
Posts: 396
tim the toolman is on a distinguished road
Default

This is interesting to read and Im hoping some others chime in with their experiences. I am about to do something very similar with my current 180. I am planning on removing everything into totes/another tank I am setting up temporarily to hold my fish while I do some upgrades to my tank.

So I guess my questions are:
1. did you rinse the sand at all beteween tanks?
2. How long did you have your rock or sand out of the water during transfer
3. How old was the original tank

Anyone with safe transfer info who would share their insight would be appreciated.
Reply With Quote
  #3  
Old 10-16-2013, 03:15 AM
Scythanith's Avatar
Scythanith Scythanith is offline
Member
 
Join Date: May 2008
Location: Saskatchewan
Posts: 1,088
Scythanith is on a distinguished road
Default

Hey Bill,

Walt Smith recommends only do the water changes on the live rock after they have "cycled" and there is no detectable ammonia and nitrites. Once those test come out negative, do a ~25% water change and test again in a week. If you're tests come out clear you're good to go.

If it tests clean, you can add it at once.
Reply With Quote
  #4  
Old 10-16-2013, 04:09 AM
Phanntom Phanntom is offline
Junior Member
 
Join Date: Feb 2013
Location: Moose Jaw, Sask
Posts: 17
Phanntom is on a distinguished road
Default

Quote:
Originally Posted by tim the toolman View Post
This is interesting to read and Im hoping some others chime in with their experiences. I am about to do something very similar with my current 180. I am planning on removing everything into totes/another tank I am setting up temporarily to hold my fish while I do some upgrades to my tank.

So I guess my questions are:
1. did you rinse the sand at all beteween tanks?
2. How long did you have your rock or sand out of the water during transfer
3. How old was the original tank

Anyone with safe transfer info who would share their insight would be appreciated.
1 - I just swished the sand around in the water then removed the dirty water

2 - just 10 to 20 seconds, just long enough to move it from tank to bucket.

3 - About a year, liked the tank so much I wanted a upgrade

I think if I would have used new sand there wouldn't have been a problem.
__________________
Bill.
SK, Canada
80g Reef Tank + 20g sump
Reply With Quote
  #5  
Old 10-16-2013, 04:14 AM
Phanntom Phanntom is offline
Junior Member
 
Join Date: Feb 2013
Location: Moose Jaw, Sask
Posts: 17
Phanntom is on a distinguished road
Default

Quote:
Originally Posted by Scythanith View Post
Hey Bill,

Walt Smith recommends only do the water changes on the live rock after they have "cycled" and there is no detectable ammonia and nitrites. Once those test come out negative, do a ~25% water change and test again in a week. If you're tests come out clear you're good to go.

If it tests clean, you can add it at once.
Thats what I thought but I also read that anything over 0.5 can continue to kill the rock and do more harm then good. I was going to leave it as soon as I got a lower reading the that. But thats why I posted my problem here, looking for any and all ideas I can get.
__________________
Bill.
SK, Canada
80g Reef Tank + 20g sump
Reply With Quote
  #6  
Old 10-16-2013, 04:18 AM
tim the toolman tim the toolman is offline
Member
 
Join Date: Feb 2011
Location: Edmonton
Posts: 396
tim the toolman is on a distinguished road
Default

I was planning on using my existing sand but doing a very thurogh cleaning of it before hand. I am now reconsidering this.
What would you say the benefit is of using new sand rather than giving the old sand a heavy rinse and using it again?
Anyone who can answer tis feel free.

Also to the op, if you would like I will open a new thread with my questions so I am not hijacking yours.
Reply With Quote
  #7  
Old 10-16-2013, 04:23 AM
Phanntom Phanntom is offline
Junior Member
 
Join Date: Feb 2013
Location: Moose Jaw, Sask
Posts: 17
Phanntom is on a distinguished road
Default

Quote:
Originally Posted by tim the toolman View Post
I was planning on using my existing sand but doing a very thurogh cleaning of it before hand. I am now reconsidering this.
What would you say the benefit is of using new sand rather than giving the old sand a heavy rinse and using it again?
Anyone who can answer tis feel free.

Also to the op, if you would like I will open a new thread with my questions so I am not hijacking yours.
I originally had very fine sand, hard to clean. I am too new to this to give a good answer but for the $50 it cost me for new sand versus the hundreds I lost in stock, I will never reuse my sand.. But thats just me..

And I don't mind if you ask your questions here, its all about the same thing...
__________________
Bill.
SK, Canada
80g Reef Tank + 20g sump
Reply With Quote
  #8  
Old 10-16-2013, 04:36 AM
The Grizz's Avatar
The Grizz The Grizz is offline
Member
 
Join Date: Oct 2009
Location: 15 min NE of Red Deer
Posts: 5,470
The Grizz will become famous soon enough
Default

Quote:
Originally Posted by tim the toolman View Post
I was planning on using my existing sand but doing a very thurogh cleaning of it before hand. I am now reconsidering this.
What would you say the benefit is of using new sand rather than giving the old sand a heavy rinse and using it again?
Anyone who can answer tis feel free.

Also to the op, if you would like I will open a new thread with my questions so I am not hijacking yours.
I have wash out sand & reused several time with no issues. I used a large fine fish net, 2 - 3 cups at a time rinsed under the tap until water was clean.

When switching tanks I try to remove all the rock I can WITHOUT stirring up the sand to a big tub with tank water in it first, then remove all the tank residence to another large tub or 2 with tank water. Next remove as much water as possible still WITHOUT stirring up the sand. Once I get to the point that I have no choice to stir up the sand all the remaining water goes down the drain. Finally I remove all the sand to a bucket to wash THOROUGHLY. Before returning any rock to the tank I mix up a new tub of fresh SW & rinse the rock in it removing any loose debris.
__________________
Feed the bear goodies, make a new friend, don't feed the bear...............

8' - 165gal Reef
DIY LED's Build
2012 Nano Contest Winner
Febuary 2013 POTM Winner
300 gal + 60 gal Complete DIY Build
Reply With Quote
  #9  
Old 10-16-2013, 04:46 AM
tim the toolman tim the toolman is offline
Member
 
Join Date: Feb 2011
Location: Edmonton
Posts: 396
tim the toolman is on a distinguished road
Default

That's good to hear Grizz. I was planning on doing something very similar to what you outlined there so I am confident going forward as planned.

I also hear what your saying phantom. The 50$ price point would be my first choice for sure, just with a larger tank it's gets up close to 200$ fairly quick lol.

I guess I just need to make sure I'm being thorough in my sand cleaning and careful with the rock removal.
Thanks for the info.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 07:47 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.