FS: Tanks, Stands, Sumps, Lights, Pumps, Powerheads, Heaters, Thermometers - Burnaby

[gregzz4]

PM your # for fastest response

Tanks stands and sumps

Aqueon 75g black trim w/removable black corrugated plastic backdrop; magnet scraper friendly.
15” ghost overflow w/3 x 1” threaded bulkheads 2 adapted to 1-1/2” (1 plugged @ 1”). 1-1/2” Gate Valve. 3 x 1” slip bulkheads (NIB), 2 x removable weirs; different tooth heights for low or high flow. Second front box w/removable lid instead of weir.
Back box has 2 lids and a float switch to connect to your controller. With 1-1/2” drains I doubt this box would ever overflow.
Over-the-back return plumbing is 1” pvc split to threaded 2 x twin 3/4” ‘Y’ locline w/round nozzles and spare set of locline assemblies for ease of cleaning swaps. 1” union check valve with spare body and O-rings.
Current plumbing is going to a remote sump. Everything is threaded and has unions so reconfiguring to your needs is no issue; nothing to cut apart.
Aqueon black pine stand w/some wire rack shelving and 4 x Duplex outlets (1 GFCI) w/2 x Power cords. Pull chain light fixture w/CFL bulb.
$500.00

60g sump black trim. I cut down a 90g. 48-1/4” x 18-1/4” x 19” tall with 1/2” pink styro and 1” square tubing base.
Tank is 3/8” glass; baffles are 1/4” glass.
Sections are;
3” drain which overflows to a 7” single sock tray w/removable acrylic base, 12” skimmer with 8” under sock for external or reactor pumps, over-under-over trap w/first baffle approx. 16-1/4” tall and 3rd approx. 15-1/4” tall. Trap spacing is 2-1/2” each and the return section is 18”.
With the return section running @ 10” the whole sump holds approx. 47g. Great for water changes without draining the DT.
Comes with Vertex magnetic 3-probe holder; 3 acrylic heater hangers in the bubble trap for Jagers, one holder has a 5 x 1/4” dosing tube rack; 3 x 7” felt socks; and a removable twin 120mm fan assembly (w/dc PS) which sits on top of the sock.
Comes with simple 1/4” acrylic skimmer stand 8-3/4” square x 7-3/4” tall for 8-1/2” running height. Can make another size for you.
$250.00

Aqueon 75g Reef Ready black trim. Eggcrate tops and acrylic overflow box cover with float switch and wiring, plus 1/2” pink styro.
These tanks come standard with a 1” and a 3/4” through-the-bottom bulkhead. I used threaded for ease of reconfiguring plumbing.
Simple drain plumbing and over-the-top returns included.
Wood stand; 2x4 base and legs, 2x6 rails no center supports with plywood shelf and ends. 48-1/2” x 18-1/2” x 31-3/4” tall.
Opening between legs is 37-1/2” wide and 22-1/4” tall from shelf to upper rails. Front to back between legs is 12-1/2” and end to end between plywood is 47-1/4”.
20g long sump approx. 30” x 12-1/2” x 12-1/2” tall. Left and right chambers are both 13-1/2” wide. First baffle is 9-1/2” tall, return baffle is 9” tall. Center baffle is 10-1/4” tall.
NO return pump. See other listings for electrical hardware.
Vertical corners were re-sealed. Good enough setup for observation/hospital/quarantine.
$150.00


36g Aqueon Bowfront black trim. Black-painted back can be scraped off. Stock canopy w/8k 17w bulb; acrylic and eggcrate top also included.
Aqueon Espresso stand with single door (small chip on door). Some wire shelving.
Setup is 30” wide; tank is 20-3/4” tall; whole setup is 49” tall. Ends are 12” F-Back; center is 16-1/2”.
$125.00 Can include Coralife 2 x 65watt power compact 6700k and twin moonlight fixture for another $50.00


Aqueon 20g black trim on Aqueon mdf black stand. Tank has acrylic and eggcrate cover. Custom cut for probes, AC50, heater.
Single door, one shelf. 27” x 14-3/4” x 46-1/2” tall overall.
Some water damage on lower left of stand from wet carpet. Bought new; never any Copper.
$75.00

Aqueon 20g black trim on bowfront mdf stand. Open concept (no door or shelf). 42’ overall height.
Bought from original owner; never any meds.
$60.00

Custom 28g eurobraced mixing tank. Glass construction. 25” x 13” x 21-1/2” tall. 1 gallon scale markings. 3/4” threaded bulkhead left bottom with some plumbing and valve.
Includes MJ600 and MJ900.
$40.00 Can include stand below for another $20.00
Can include 100w Jager heater and Vertex gnd probe for another $35.00

Stand black pine 25-1/4” x 13” x 25-3/4” tall with lower shelf. Holds 10g on bottom shelf (my ATO tank) and top fits above mixing tank.
$25.00

Aqueon 10g tanks black trim. Never any meds.
$15.00 with acrylic lid (1 available)
$10.00 tank only (1 available)

Lights

ATI Powermodule 8 x 54 watt. No LED/non-dimmable. Comes with hanging kit and will include flatbar to screw to ceiling joists, and power supply for cooling fans. Acrylic splash guard.
Also comes with 4 BNIB fans and 1 BNIB ballast.
Very quiet fans.
Converted from stock twin power cables to 4 x power cables. I can easily convert it back if you like.
2 x Blue Plus new start of October; good for 15-18 months @ 10hr/day. 2 x Blue Plus good for another year @ 3hrs/day.
2 x Coral Plus and 2 x Aquablue Special good for another 6 months @ 6hrs/day.
Spare bulbs;
4 x Coral Plus used 7hrs/day for 12 months. Good for at least another 6 months @ 10hrs/day, or a year @ 4-5hrs/day.
2 x Aquablue Special used 5hrs/day for 12 months. Good for at least another year @ 10hrs/day.
2 x Blue Plus used 3 hrs/day for 6 months. Good for over another year @ 10hrs/day.
—- Bulk Reef Supplies ran T5HO testing and proved we can run these bulbs for up to 15-18 months of regular use before PAR sees any significant reduction.
$500.00 FIRM Will include my Canopy (listed below) for another $50.00

Canopy for above style light; home-made. Fits standard 75g 4’ tank with trim or eurobraced. Approx. 48-5/8” x 18-7/8”.
Open top; lights sits on 1/2” black weather-strip closed cell foam (upper, and lower to sit on tank).
Black glossy pine; bright white inside. 2 x 120mm inlet grills (left side back) and 1 x 120mm exhaust fan (right side back) w/power supply. Doors on each end and twin center doors with no center brace in the way. Mount for eheim autofeeder w/air hole for feeder fan. Cut-outs for over-the-back returns.
Fits lights 16-1/2” to 18-1/4” x 45-1/2” to 48-3/4”. 9-1/2” tall without black foam, with 6-1/2” tall door openings. End door openings 11” wide; front opening 36-1/4” wide.
$100.00

Coralife Aqualight Dual T5HO with legs #08600 24” fixture. 2 x 24watt; 1 ATI Coral Plus and 1 ATI Aquablue Special. Bulbs run for less than 1 month. Comes with used ATI Blue Plus and ATI Coral Plus; no idea how old they are.
$90.00

Coralife Lunar Aqualight 30” 2 x 65watt Power Compact 6700k bulbs, 2 x moonlights and cooling fan; with mounting legs.
Works fine. Good for T5 conversion project or parts.
$50.00

Coralife Aqualight 24” 1 x 65watt Power Compact 10k bulb. With mounting legs and spare used 6700k bulb.
Works fine. Good for T5 conversion project.
$25.00

Coralife LED Aqualight 30” fixture #08626 Tri-light LEDs. Comes with all 11 sockets filled with light pods; 4 x 10k, 2 x Actinic, 3 x 60/40 and 2 x Colormax. Total of 33 LEDs. Mounting legs, cooling fan and moonlights. 3 cords.
Used less than 3 months. Stupid money new; currently on fleabay for $320US without the extra 4 pods @ $40+US each.
Do your research whether this will be enough for your needs. Claims to be good enough for SPS … I’d say LPS.
$100.00

20” Canopy for 10g; twin 25watt incandescent sockets and 1 bulb. Previous owner burnt inside housing.
Probably takes LED bright sticks.
Free

24” Canopy for 20g tall; AllGlass brand 19watt fluorescent used freshwater only; condition excellent
$15.00

24” Canopy for 20g tall; 15watt some saltwater use; condition good needs a wipe
$10.00

24” Canopy for 20g tall; unknown plant bulb, some salt rust, DIY legs for use without canopy
Free

Power Compact 96watt 6700k square 4-pin bulbs Unknown condition
Free

Water pumps

-Eheim
Compact 600 max head 1.3m; 150-600lph; 11watts; adjustable flow screen inlet; 1/2” push-on outlet
Comes with push fitting adapter for 3/8” tubing for reactors or what have you
$25.00 each 2 available

Compact 1000 max head 2.0m; 150-1000lph; 23watts; adjustable screen inlet; 5/8” push-on outlet
$30.00 used
$45.00 NIB

Compact+ 2000 max head 2.3m; 1000-2000lph; 35watts; screen or 3/4” FPT(?) inlet; 3/4” barbed outlet
$75.00 w/silicon tubing currently running on 1/10hp chiller

Compact+ 3000 max head 3.0m; 1500-3000lph; 66watts; screen inlet or 3/4” FPT; 3/4” FPT outlet. Adjustable output; run submerged or inline
$125.00 NIB

Compact+ 3000 transfer pump setup; same above specs
Comes with 65 feet of 1/2” clear vinyl tubing; ball valve near each end; and an assortment of unions/other fittings; wall hanger. Was used to pump RO to my sump room then old SW to the toilet then flushed with RO after each use.
$175.00
Can come with 55g RO drum w/lid for another $75.00 which includes 3/4” Uniseal and 3/4” Cepex ball valve at drain/supply height; high overflow uniseal w/pipe plumbing; 1/4” RO shutoff valve

Universal 1262 max head 3.6m; 3400lph; 80watts; 3/4” FPT inlet and outlet
$100.00 each 2 available

Universal 1262 impeller cover NIB
$10.00

Universal 1260/1262 O-rings 2 pack NIB
$10.00

-Quiet One Pro
1200 max head 6.1ft; 296gph; 25watt; screen or 1/2” MPT inlet; 1/2” MPT outlet
$30.00

4000HH ‘high head’ max head 13 feet; 980gph; 120watts; 1” inlet 3/4” outlet. w/some 1” outlet hose and spare NIB impeller cover
$75.00

Powerheads

-Cobalt 600 NIB; tested with push fittings; all original parts still bagged in the boxes
$35.00 2 available

-MaxiJet
MJ400 $10.00 each 2 available
MJ600 $15.00 each 3 available
MJ900 $15.00
MJ1200 $15.00

Heaters

-AllGlass 100w never submerged $15.00
-Aqueon 10watt AQ10w very little use in acclimation buckets $15.00
-Eheim Jager
100watt NIB $35.00
100watt never submerged $25.00
100watt used in mixing tank $20.00
200watt NIB $40.00
200watt never submerged $30.00 each 3 available
250watt never submerged $30.00 each 2 available

Thermometers

Floating glass 5 available free with purchase over $10.00
Lifegard Big Alert first style no clock $25.00 2 available