|
|
|
#1
01-18-2005, 05:36 PM
|
|||||
|
|||||
Stand
Someone has finally agreed to build me my stand. A quick question though. He wants to glue two 1" pieces of plywood together for the frame posts. He said this will be stronger than using 2X4's. Is this true? I've never seen anything else ever used other than 2X4's or 2X6's.
|
|
#2
01-18-2005, 05:39 PM
|
|||||
|
|||||
|
It's stronger if it stays dry. (Me thinks.)
__________________
Gary CAN'T WE ALL JUST GET A BONG!?! ´¯`·.¸¸.·´¯`·.¸ ><((((((º>´¯`·.¸¸.·´¯`·.¸ ><((((((º> `·.¸¸.·´¯`·.¸¸.·´¯`·.¸ ><((((º> `·.¸¸.·´¯`·.¸¸.·´¯`·.¸ ><((((º> ´¯`·.¸¸.·´¯`·.¸¸.·´¯`·.¸ ><((((((º> ´¯`·.¸¸.·´¯`·.¸¸.·´¯`·.¸ ><((((((º>
|
|
#3
01-18-2005, 05:45 PM
|
|||||
|
|||||
|
Plywood? I'm not so sure. I know that fastening two pieces of 1" solid wood will be stronger than a 2x4, but plywood? If your friend is an experienced woodworker then I would trust him, but somehow that rings an odd bell to me.
I suppose it also depends on wood types. I always build stands using solid 2x4 or 2x6 fir. I always thought plywood was kind of a 'happy mix' of different woods (much like the 2x4 you can get at HD and Rona - SPF: spruce? pine? fir?). Of course, if the tank isn't holding up more than a few hundred pounds, I wouldn't worry. If you need a good fright, look at any prefab stand in a LFS. They're built almost shockingly flimsily, yet how often do you hear about one of those stands collapsing?
|
|
#5
01-19-2005, 12:30 AM
|
|||||
|
|||||
|
It can be stronger yes because of the lamination and because it will be a true 2X4 size. It will also resist warping more as plywood is more stable. I would use a urethane glue in this situation and then coat it very good to prevent moisture from getting at the plywood.
Steve
__________________
 *everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*Some strive to be perfect.... I just strive.
|
|
#6
01-19-2005, 01:08 AM
|
|||||
|
|||||
|
I would say it is very strong, not saying it would be stonger than 2X4's. It would be stronger than the particle board ones that you buy in the store that are held together with staples
__________________
Murray I reserve the right to hijack any thread I want to!! My carbon footprint is bigger than your carbon footprint !!!!
|
|
#8
01-20-2005, 12:00 AM
|
||||
|
||||
|
plywood is stronger than any grade of 2X4's hands down. If you have a choice fir ply is stronger the spruce ply and only a little more money. For laminating the plywood together I would recomment in using a 2 part marine glue. As far as plywood delaminating, if properly sealed/painted there shouldn't be any problem.
I have used the marine glue in constructing various projects that I used on/in the water.
|
|
#9
01-20-2005, 02:52 AM
|
|||||
|
|||||
|
geeeman, where in LA do you live? good to see someone from my home town on the board.
Steve
__________________
*everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*Some strive to be perfect.... I just strive.
|
|
#10
01-20-2005, 11:15 PM
|
||||
|
||||
|
Quote:
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
