Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > DIY

Reply
 
Thread Tools Display Modes
  #1  
Old 03-06-2005, 03:17 PM
Skimmerking's Avatar
Skimmerking Skimmerking is offline
acanthastrea freak
 
Join Date: Jun 2002
Location: Virden, Manitoba
Posts: 5,687
Skimmerking is on a distinguished road
Send a message via ICQ to Skimmerking Send a message via MSN to Skimmerking
Default getting a refugium online

Ok i have a sump in the baement and would like to ru a refugium for the tank. Problem is the main tank is upstairs and i have no room for a refugium in the dining room.

I would like to eun on down stairs but i can't seem to think where to put one where the sump is sitting at around 48" up from the floor and i was thinking of mixing a sump with a refugium. is it wise to to this Doug and I was alking and your really defeating the purpose of a refugium in the sump area for pods.

So is there another way to do it. could i run a small 5 gal tank would that work. But i see that a refugium once you have the substantial amount of pods in the tank it will make their way to the main tank RIGHT.


mike
__________________
180 starfire front, LPS, millipora
Doesn't matter how much you have been reading until you take the plunge.
You don't know as much as you think.
Reply With Quote
  #2  
Old 03-06-2005, 03:47 PM
KrazyKuch's Avatar
KrazyKuch KrazyKuch is offline
Member
 
Join Date: Dec 2004
Location: Calgary S.W
Posts: 656
KrazyKuch is on a distinguished road
Send a message via MSN to KrazyKuch
Default

You can have a fuge.....I say the fuge should be based on the size of you main tank but I don't know by how much....To keep the pods in your fuge you just have to make it hard for them to do it thats all......I pump water up from my sump into my fuge then for the drain back into the sump I have a bulkhead with a 90 degree elbow on the end that points straight up so it only take the water from the suface!!!
__________________
500G Mixed Reef



__________________________________
Electrician, Electronics Technician, I can help with any electrical questions you might have!!
__________________________________

Kevin
Reply With Quote
  #3  
Old 03-07-2005, 06:35 PM
BCOrchidGuy BCOrchidGuy is offline
Member
 
Join Date: Dec 2002
Location: Coquitlam, BC
Posts: 2,172
BCOrchidGuy is on a distinguished road
Default

Mike I remember reading something about this a couple years ago. Common thought was that the power head/pump returning the water from the sump/refugium would kill pods etc. It turns out that a number of pods and larvae did survive the trip intact. I think the refugium has gotten away from being used as a refuge for fish/inverts you want to keep seperate from your tank and gone towards a refuge/filter system. I'd give it a try as you suggest and see how it goes. If nothing else you can always run a brine shrimp net through the fuge every couple of days and dip that into the main tank.

Doug
Reply With Quote
  #4  
Old 03-07-2005, 09:01 PM
Skimmerking's Avatar
Skimmerking Skimmerking is offline
acanthastrea freak
 
Join Date: Jun 2002
Location: Virden, Manitoba
Posts: 5,687
Skimmerking is on a distinguished road
Send a message via ICQ to Skimmerking Send a message via MSN to Skimmerking
Default

ok cool thanks Doug


mike
__________________
180 starfire front, LPS, millipora
Doesn't matter how much you have been reading until you take the plunge.
You don't know as much as you think.
Reply With Quote
  #5  
Old 03-10-2005, 04:05 PM
tranvictor tranvictor is offline
Member
 
Join Date: Oct 2004
Location: deadmonton
Posts: 72
tranvictor is on a distinguished road
Default

Mike:

I don't know the parameters of your main tank, but have you thought about a hang on fuge? That way the critters won't get chewed up by pumps. They'll just gravity feed back into the main tank.
Reply With Quote
  #6  
Old 03-10-2005, 04:48 PM
Skimmerking's Avatar
Skimmerking Skimmerking is offline
acanthastrea freak
 
Join Date: Jun 2002
Location: Virden, Manitoba
Posts: 5,687
Skimmerking is on a distinguished road
Send a message via ICQ to Skimmerking Send a message via MSN to Skimmerking
Default

Tranvictor i never thought of that good call on that one.

Will look into it. The only problem is the canopy is sealed around and i have 2x 1" holes drilled into the back to run wires and the return. I will post a picture of where a hang on could go after i get home from work any idea's

mike
__________________
180 starfire front, LPS, millipora
Doesn't matter how much you have been reading until you take the plunge.
You don't know as much as you think.
Reply With Quote
  #7  
Old 03-11-2005, 12:22 AM
StirCrazy's Avatar
StirCrazy StirCrazy is offline
Member
 
Join Date: Oct 2001
Location: Kamloops, BC
Posts: 7,872
StirCrazy is on a distinguished road
Default

the other option is putting a small tank on a shelf above and behind the tank and having it drilled so it overflows into the main tank. then you just pump water up to that tank.

Steve
__________________
*everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*

Some strive to be perfect.... I just strive.
Reply With Quote
  #8  
Old 03-17-2005, 05:38 PM
tranvictor tranvictor is offline
Member
 
Join Date: Oct 2004
Location: deadmonton
Posts: 72
tranvictor is on a distinguished road
Default

Are you planning on making your own fuge, or are you purchasing it? CPR makes some good systems, it will only rtequire drilling a couple of 1 inch holes in your canopy. Or if you have a good custom tank builder where you are you can get a custom fuge made to your specs. I had the guy at Bow Valley in Calgary make me one for $60. Then I cut some glass for baffles, got some plumbing parts, attached a powerhead. Total cost around $130.

Smell ya later.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 03:22 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.