Quote:
Originally Posted by daplatapus
If anyone is interested, I'll probably be making a custom order for the 4-LDD pcb boards with the pull down resistor jumper that rrasco made on the RC thread. PM me if you interested in any of the boards...
|
You will need to modify the Jardiuno code to latch on logic low instead of high.
These changes will work. Low = on and high = off.
Intermittently, this logic used to turn the relay on & off will work backwards because of the opto-iso.
Jamie does have a SSR (solid state relay) setup which is installed & wired directly behind the outlet. This setup is the most stable and the quietest - SSR don't make the mechanical latching sounds.
I hope this helps!