Quote:
Originally Posted by StirCrazy
for one they don't say what kind of LEDs there using, if they are using Cree (or another good brand) then no difference, if they are using some of the cheep ones that use a coating to get the color then the coating will break down eventually and these ones will give you a spectrum shift. there has even been reports of the coating pealing off in places. so it basically comes down to how the LED is made. you get the expensive high quality that use the actually metal of the diode to give off the color you want and you get the cheep and sometimes expensive ones that use a cheep metal to give a blueish color and then coat the dome with colored phosphorus to tune the color to what they want.
Also you want to check into the power supply and if it can be controlled. there are cheaper power supplies that are not regulated as much so this can lead to early failure, and controllability adds cost (although not much)
and finally what is there heat sink and how is the temp managed, you can get systems that use a aluminum heat sink that is enough on there own then add fans as a back up, and you can get systems that if the fans fail your system will be cooked. allot of the companies now are using a heat sink material as the circuit board and mounting the bare LEDs directly to it. nothing wrong with this as long as it is rated for proper thermal dissipation, some companies will do this but use the cheapest material they can find then over size fans. So you really have to looking to the construction and parts used in the system.
Steve
|
dude, get this out of my thread!!
