Quote:
Originally Posted by Phanman
I had the same problem with fitting the whole thing in at once (1.5 inch) due to the eurobracing. What i had to do was assemble it in the overflow chamber. Abit tricky to work with but was able to get er done..
|
With what type?
I had built a modified Duraso. I had cut the "T" and 90 elbow down to a minimum. It was designed to fit in the overflow chamber, which it would if I could get the darn thing past the eurobrace.
So its some type of straight pipe stack now.
I think I will go with the HGB, in the sizes Steve suggested.