[quote=bourbon;235116]ok niloc16 so you mention that you are waiting for a y connector to connect the fans to the L1 port - so does this mean that you have all of your L ports used up? because they ports are labelled L1/L2 I'm assuming that you can connect 2 devices per port but need a y connector. Is this right.
1. you can have a 'y' adapter on each 'L' port (sorry i dont know the exact name of these ports) making a total of four. currently i have each tunze connected to a seperate port. when i get the adapter i will have tunze1 connected to L1 and the fan controller connecte to L2 and tunze2 connected to L3
I also remember reading that if you connect 2 tunzes to L1/L2 that you can't operate them independently - you have to use L1/L3 which takes up 2 ports. I'm concerned about the amount of L ports I will need. So by similar logic I'm assuming that if you have more than 1 LED you will have the same problem - i.e. use L1/L2 but not control them independently or use L1/L3.
2. you dont have to have both tunzes connected to L1/L2. read my last answer
|