RO/DI question

[adidas]

just installed my aqua-safe RO/DI system, the black valve with yellow tubing is the drainage tube right? do ii leave it open all the time? and how much water do i need to run through to break it in...

thx

[medican]

This is rite from the Aqua-safe info book:

1.1 It is a good idea to flush the pre-filters prior to hooking them up to the IN side of the membrane. Just hook up the yellow discharge line to the third filter (“out”), and let the water run for 10 minutes or so. When it’s done, reconnect the yellow discharge to the flow restrictor and also hook up the line to the auto shut-off valve.

If you PM me your e-mail I'll send you the hole word doc.

Cheers

[Chad]

just installed my aqua-safe RO/DI system, the black valve with yellow tubing is the drainage tube right? do ii leave it open all the time? and how much water do i need to run through to break it in...

thx

When producing water the black valve should be perpendicular (90 degree angle to the body of the valve). When flushing the membrane you should have it horizontal with the valve. In both ways there will be water flowing down the drain, just when flushing its full force.

Chad

[adidas]

cool ok, how often should i flush the membrane?

:biggrin:

thanks

[Chad]

cool ok, how often should i flush the membrane?

:biggrin:

thanks

depends on how often you use it, I flush mine for 15mins, once a month or so.