View Full Version : Dosing mixture
So I am wanting to make my dosing mixture. I have calcium chloride and soda ash and I'm wondering what ratio people use? I was going to try 10:1 and test from there but I would like to hear any other advice
gregzz4
09-25-2014, 03:14 AM
Not sure what you mean by 10:1. You weren't planning on mixing the 2 together were you ?
10:1 is a Magnesium dose for people with calcium reactors ... so you've got me confused
You want to start by testing your tank for a couple days to see how much it uses, and then start dosing while testing daily.
After the first week if you have everything stable you can then back off the testing to weekly and then finally monthly if you like.
I still test weekly
Here's a BRS Video (http://www.bulkreefsupply.com/video/view/how-to-dose-2-part-video/) for you
And here's (http://www.reefkeeping.com/issues/2006-02/rhf/) where you can look to get an idea about how much to start dosing with
Look halfway down the page for the starting dosages, but I'd recommend you read the whole writeup
gregzz4
09-25-2014, 03:15 AM
If I misunderstood your question completely, the reefkeeping writeup will show you how to mix up your 2-part
The Guy
09-25-2014, 06:14 AM
Bulk Reef Supply has a video on how to mix it as well on their site.
No I'm not mixing together I ment 10:1 ten parts water one part chemical. I have been dosing with pre mixed stuff already and I'm using 5ml a day to keep calcium at 420. The product I got is in bulk and its dry and I'm just trying to figure what concentration is best.
Use the recipe on BRS or Google Randy's 2-part. I always weigh the salts rather than measuring volume - much more accurate.
Hey that's good to know thanks
vBulletin® v3.7.3, Copyright ©2000-2024, Jelsoft Enterprises Ltd.