PDA

View Full Version : stacker stand


canadianbudz604
04-02-2014, 02:04 AM
hey, im getting ready to set up my 40g reef tank. I bought this stacker stand, and now im looking for a way to cover the back so you don't see all the wiring and cords etc. I cant use a sheet of plywood because according to my wife "its ugly". anyone have any ideas on a good cover, and ways to attach it?

http://i1227.photobucket.com/albums/ee433/canadianbudz604/image_zps0f7a0ac3.jpg (http://s1227.photobucket.com/user/canadianbudz604/media/image_zps0f7a0ac3.jpg.html)

darkreef
04-02-2014, 02:29 AM
Finished plywood stained ?

Expanded metal painted black , then you could neatly Zip tie the wires back .

Black eggcrate?

Door screen?

You could put magnets on what ever and it will stick it to the stand .
Easier to move and stuff .

SteveCGY
04-02-2014, 02:31 AM
Black sheet plastic glued or velcrod

Glass glued?

Cujo#31
04-02-2014, 03:50 AM
+1 on the plywood stained. Simple, effective

canadianbudz604
04-02-2014, 03:53 AM
And what just cut it tight and fit it in or glue it on? I can't put any screws. Where would I find a big sheet of plastic like that?

Cujo#31
04-02-2014, 03:59 AM
Lemme check for u. We buy 4x8 sheets of HDPE all the time at work. Problem is it might not glue that well, u will have to do it in silicon me thinks

darkreef
04-02-2014, 04:03 AM
My stand is all wood and magnets inside a aluminum frame.
I superglued them on . You can get a very nice glue to do the job !

canadianbudz604
04-02-2014, 04:52 AM
Magnets? Got any pics

gregzz4
04-02-2014, 05:02 AM
I covered the back of my 75g with some water-resistant material we bought from a fabric store. Cheap ...
I attached it to the trim with some industrial velcro on 6 points

Nice thing is, if I don't like black, I can always buy different material :wink:

Jakegr
04-03-2014, 03:18 PM
You can get magnets that screw into plywood from Lee Valley.

Get a nice sheet of plywood, like walnut, stain it and finish it. Finish the corners in aluminum angles or something. It's easy and will look good.


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

pinkreef
04-03-2014, 04:45 PM
ready-made cupboard doors