come program my apex DOS $75 maple ridge

[e46er]

my peristaltic pump i used for top off finally stripped the gears after 8 years and I figured why not buy something nice like an apex DOS....... well im regreating that decision and I cant get this dinosaur aged software to work at all.

Im in Maple Ridge and will pay $75 for someone to come set it up regardless if you do it in 26 seconds or 2 hours.

apex is running current software.

PM here or text 778-240- three zero two three

cheers
Kent

[TStorm]

have you tried using the task to program the dos? what is it that you would like to dos?
that may be able to be done remote also.

[e46er]

Just want to use 1 pump for water top off
Have peristaltic pumps for ca and alk that work just fine.
It’s programmed on fusion and the power is on the manual buttons work it just doesn’t work with programming.

[Pazil]

have you asked for advice on the neptune forum, those guys are usually pretty helpful.

[juanlien]

Originally Posted by Pazil

have you asked for advice on the neptune forum, those guys are usually pretty helpful.

+1

[kyl]

The original gen ATK (and DDR) sensors are junk, to the point they put out a revision of both the optical sensors, and the PMUP. If under warranty the gen1 they would replace the sensors, else they wanted $30 US per, plus shipping, for the gen2 sensors direct from Neptune.

[e46er]

Originally Posted by juanlien

+1

no i haven't. Honestly I got so ****ed off just trying to update it, I'd rather just pay someone to do it for me.

[smokinreefer]

Originally Posted by e46er

Just want to use 1 pump for water top off
Have peristaltic pumps for ca and alk that work just fine.
It’s programmed on fusion and the power is on the manual buttons work it just doesn’t work with programming.

Sorry to derail...
Why are you using a DOS for water top off?

Wouldnt the ATK auto top off kit be better suited for this purpose?

[Bblinks]

Hey Kent, you can just grant someone access through your apex so they can have remote control. Shouldn’t be that hard to program it. I can get someone to do it as long as you tell me what you need it to do.

[e46er]

Originally Posted by Bblinks

Hey Kent, you can just grant someone access through your apex so they can have remote control. Shouldn’t be that hard to program it. I can get someone to do it as long as you tell me what you need it to do.

Please!!!!
I’ll pm you