Bean animal plumbing help

[smokinreefer]

Hey so if I am correct, for a bean animal overflow the secondary drain is in effect a Durso standpipe. Im guessing there's a special bit to "tap" the cap so I can get a JG fitting on to connect 1/4" tubing?

Here's a pic of the overflow. The center drain is the secondary Durso. At the moment there's no standpipe on the main drain ( it's just the bulkhead on the bottom right of overflow box)

I do have a cap that will go on the top of the Durso. Which is what needs the tubing to be attached to, correct?




Sent from my SM-G955W using Tapatalk

[gregzz4]

Should be 1/8 pipe.
You need a 1/8-27 npt tap and an 11/32 drill bit

[WarDog]

http://www.canreef.com/vbulletin/sho...postcount=1237

[Dash]

Gee, I have a whole box of those in my kid’s closet. I think this is one plumbing job I can manage myself!

[gregzz4]

Shao, I have all the tools here if you don't. PM me if you don't still have my cell # and we'll set up a time for you to bring over your cap and fitting.

[gregzz4]

Looks like it's going to be 1/4npt. Pick one up at J&L and I'll help you with the thread.

[gregzz4]

Good to finally meet you bud