|
|
|
#1
10-18-2009, 05:00 PM
|
|||||
|
|||||
Looking for some recomendations for a new skimmer
I am almost ready to run my 60 Gal cube and I could hook 2 Remora pro's with Mag drive three's on them up to it, but am thinking there must be something a bit better than that. I am just not sure what.... not wanting to spend thousands, but wanting something decent as well.
I am limited to about a 12x12x18 or less space. I also would prefer it to be in sump. Any thoughts.
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return. 
|
|
#2
10-18-2009, 05:53 PM
|
|||||
|
|||||
|
What about a Vertex IN-80?
Or what about the octopus line (pumps may be quieter): Reef Octopus Extreme 160 Reef Octopus DNW 150 Recirculating
|
|
#3
10-18-2009, 06:05 PM
|
|||||
|
|||||
|
I would look at the Vertex Line. They are extremely good value and supper quiet. My Alpha Cone 300 is very quiet and works extremely well.
There are much smaller models in the Vertex line that would be ideal for your situation. These look like something to look into as well http://www.canreef.com/vbulletin/forumdisplay.php?f=161 Tom R Last edited by Tom R; 10-18-2009 at 06:08 PM.
|
|
#4
10-18-2009, 06:27 PM
|
|||||
|
|||||
|
The alpha cones are made by Royal Exclusive, so they are not comparable to the regular vertex line.
http://glassbox-design.com/2009/new-...d-more-photos/ Definitely a good skimmer though if it's in your budget, however the smallest model may be too big for your setup.
|
|
#5
10-18-2009, 07:21 PM
|
|||||
|
|||||
|
Another vote for Vertex, excellent value in a mid-quality skimmer. EuroReef would be a slight step up, and another I would recommend. I would suggest you pick a skimmer that is rated for about 25% more than the volume of your system. How big is the sump? A Vertex In-100 or EuroReef RS-100 would probably fit the system better than the 80 gallon version of either.
|
|
#6
10-18-2009, 07:36 PM
|
|||||
|
|||||
|
Not sure the vertex will fit I have a max hieght of about 20"
I am just uploading the pictures now.
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return.
|
|
#8
10-18-2009, 07:52 PM
|
|||||
|
|||||
|
I can go external but would prefer not to.
 Here are some pictures to give you a better idea. Sump  The Tank  Together 
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return.
|
|
#9
10-18-2009, 07:56 PM
|
|||||
|
|||||
|
SWC (salt water connections) skimmers are nice. Not sure about size wise but here's a link so you can take a look. http://saltwaterconnection.com/index...ath=1&sort=20a
__________________
One more fish should be ok?, right!!!  - Laurie
|
|
#10
10-18-2009, 08:01 PM
|
|||||
|
|||||
|
Those look good but the shortest one is 23" tall
I might get that Vertex in but it depends how the cup comes off.
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return.
|
Linear Mode
