Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Tank Journal > Canreef Nano Contest 2012

Reply
 
Thread Tools Display Modes
  #1  
Old 10-14-2012, 04:02 AM
The Grizz's Avatar
The Grizz The Grizz is offline
Member
 
Join Date: Oct 2009
Location: 15 min NE of Red Deer
Posts: 5,470
The Grizz will become famous soon enough
Default Grizz's 2012 Nano Contest Entry

Ok so here it is the start of my nano thread & one of the last to start there build.

I have not totally decided which way I am going to go with this tank yet. It will be one of 2 ways, 1st would be to go with a built in sump in the tank big enough to hold my tunze 9010 skimmer ( over kill yes but what the hell ) a bubble trap & a small return pump. 2nd would be to use an old HOB filter / skimmer thingy I got with my very first saltwater system I bought used.

Started with this today:


After about an hr. I had this old tank all apart & some what cleaned up. Made a few cuts to get the pieces that I required for the size of the tank I was thinking of building & started to assemble.

Ended up with this so far:


Tomorrow I will finish up with the silicone and final clean up. I have not decided yet if I am going to build an LED light, use a Marine Land LED that I already have or purchase a SOL or Vaga.

I have a bunch of LR that is in my sump of my 165 with some decent shapes and sizes, going to use some black sand as well in my nano.

As for coral I am going to put some maxi mini's & zoas to start with. For fish I hope to find a few different types of clown goby's, a couple sexy shrimp and maybe a couple of the smaller blennies.
__________________
Feed the bear goodies, make a new friend, don't feed the bear...............

8' - 165gal Reef
DIY LED's Build
2012 Nano Contest Winner
Febuary 2013 POTM Winner
300 gal + 60 gal Complete DIY Build
Reply With Quote
  #2  
Old 10-14-2012, 05:57 AM
lockrookie's Avatar
lockrookie lockrookie is offline
Member
 
Join Date: Dec 2009
Location: regina
Posts: 1,535
lockrookie is on a distinguished road
Default

Looks good .... If it makes you feel better I've been sick and haven't got much done myself... Sunday is d day and testing hopefully if the twins let me


Sent from my porcelain aquarium
__________________
Desperately seeking serenity ...
180g custom build
http://www.canreef.com/vbulletin/showthread.php?t=81400

50g custom daycare tank...
http://www.canreef.com/vbulletin/showthread.php?t=65428
Reply With Quote
  #3  
Old 10-14-2012, 09:40 PM
The Grizz's Avatar
The Grizz The Grizz is offline
Member
 
Join Date: Oct 2009
Location: 15 min NE of Red Deer
Posts: 5,470
The Grizz will become famous soon enough
Default

Quote:
Originally Posted by lockrookie View Post
Looks good .... If it makes you feel better I've been sick and haven't got much done myself... Sunday is d day and testing hopefully if the twins let me


Sent from my porcelain aquarium

Well at least Im not the only one draging there arse!!
__________________
Feed the bear goodies, make a new friend, don't feed the bear...............

8' - 165gal Reef
DIY LED's Build
2012 Nano Contest Winner
Febuary 2013 POTM Winner
300 gal + 60 gal Complete DIY Build
Reply With Quote
  #4  
Old 10-14-2012, 09:54 PM
The Grizz's Avatar
The Grizz The Grizz is offline
Member
 
Join Date: Oct 2009
Location: 15 min NE of Red Deer
Posts: 5,470
The Grizz will become famous soon enough
Default

Well I got the tank all cleaned up and beaded the inside with silicone. Also decided I am going to run my Tunze skimmer just for kicks so I moved forward, cut a few more pieces of glass and put in a bubble trap.




Next step will be to put in the divider between the tank and sump/OF section, a little black acrylic and a return pump.
__________________
Feed the bear goodies, make a new friend, don't feed the bear...............

8' - 165gal Reef
DIY LED's Build
2012 Nano Contest Winner
Febuary 2013 POTM Winner
300 gal + 60 gal Complete DIY Build
Reply With Quote
  #5  
Old 10-14-2012, 10:48 PM
Enigma's Avatar
Enigma Enigma is offline
Member
 
Join Date: Mar 2012
Location: Calgary, AB
Posts: 1,062
Enigma is on a distinguished road
Default

Following along. this is going to be interesting.
Reply With Quote
  #6  
Old 10-14-2012, 10:57 PM
don.ald's Avatar
don.ald don.ald is offline
Member
 
Join Date: Feb 2008
Location: Victoria
Posts: 719
don.ald is on a distinguished road
Default

Bubble trap?? Skimmer?? Don't get it...can you explain.
R.

Quote:
Originally Posted by The Grizz View Post
Well I got the tank all cleaned up and beaded the inside with silicone. Also decided I am going to run my Tunze skimmer just for kicks so I moved forward, cut a few more pieces of glass and put in a bubble trap.




Next step will be to put in the divider between the tank and sump/OF section, a little black acrylic and a return pump.
Reply With Quote
  #7  
Old 10-14-2012, 11:41 PM
The Grizz's Avatar
The Grizz The Grizz is offline
Member
 
Join Date: Oct 2009
Location: 15 min NE of Red Deer
Posts: 5,470
The Grizz will become famous soon enough
Default

Quote:
Originally Posted by don.ald View Post
Bubble trap?? Skimmer?? Don't get it...can you explain.
R.
Well Rick it's like this, all my tanks have sumps with big ares skimmers & several bubble traps to eliminate any micro bubble that might be caused by the skimmer. I don't think I can run a system with out some kind of sump compartment & skimmer as it helps to clean the water some what as well as add O2 to the water column. I think I might add a small reactor with some carbon as well.

Did that help

It will make more sense once I am finished building.
__________________
Feed the bear goodies, make a new friend, don't feed the bear...............

8' - 165gal Reef
DIY LED's Build
2012 Nano Contest Winner
Febuary 2013 POTM Winner
300 gal + 60 gal Complete DIY Build
Reply With Quote
  #8  
Old 10-16-2012, 01:53 AM
The Grizz's Avatar
The Grizz The Grizz is offline
Member
 
Join Date: Oct 2009
Location: 15 min NE of Red Deer
Posts: 5,470
The Grizz will become famous soon enough
Default

oct15th /2012- empty tank shots:
by this date some pics of your dry empty tanks and what ever equipment you may have is to be provided.

So here is my 16 gal empty nano tank, with my Tunze 9010 skimmer in place. Also going to use a AC Jr. that I have just collecting dust to monitor temp & Ph.I will be putting my heater in the bubble trap on the skimmer side to let the water flow nicely past it. For my return pump I will be using a MarineLand MJ1200, that is if I can find where I put it.


__________________
Feed the bear goodies, make a new friend, don't feed the bear...............

8' - 165gal Reef
DIY LED's Build
2012 Nano Contest Winner
Febuary 2013 POTM Winner
300 gal + 60 gal Complete DIY Build
Reply With Quote
  #9  
Old 10-17-2012, 12:48 AM
Proteus's Avatar
Proteus Proteus is offline
Member
 
Join Date: Apr 2011
Location: Devon
Posts: 2,784
Proteus is on a distinguished road
Default

Very nice Greg. How much you want for it
Reply With Quote
  #10  
Old 10-17-2012, 12:53 AM
Nano's Avatar
Nano Nano is offline
Member
 
Join Date: Nov 2011
Location: Wetaskiwin Alberta
Posts: 2,330
Nano is on a distinguished road
Default

Holy cow is that the skimmer from your old office tank?
Overkill? I think not.
What are you looking for for turnover? I have a nano pump that's rated at 300gph collecting dust if you want it. I think its a hydor. It's quite too and I'm passing through with the famjam this weekend. You could try it if you like, if not no biggie :P
__________________
I'm not 'fallow' you must be talking about my tank!

Last edited by Nano; 10-17-2012 at 12:58 AM. Reason: added to post.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 08:49 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.