What % do you run your LEDs at?

[CastawayReef]

Hi everyone,

Just wondering what % you set your LEDs at?

My whites are at 20% and blues at 10%.

Im running a vertex ilumina 260 over my 24" inch deep tank.

[jorjef]

LPS tank, 24" deep, AI Sol, white 35, both blues 98

[Doug]

All sps. Both fixtures @ 100% blue & 60% whites ( and violets, green & whatever else). Going to crank up whites another 10% soon

[Wretch]

I am running a evergrow 120w led over my 22" deep tank. I run blues at 100% and whites at 50%. I could run whites higher but dont like the colour then.

[mark]

80% for Hydras and not sure why, other than to justify to myself I'm being easy on the drivers. Never have come across anything from the manufacturer saying not to run at 100%. Not that I could, never considered running my MHs at less than full power.

[Aquattro]

When I ran LED (6 x AI sol), white were 98%, blues at 100%.

[CastawayReef]

Cool!

I guess my % is on the low side. Once I have my canopy up I'll turn it up a few points.

So far I don't see my sps having issues. Although polyp extension is lacking, but that could be other factors ... .,

[Skimmer Juice]

run a kessil a360w , %100 intensity , %80 blue , %20 white
36x20x20 , fixture 6 inches from water mixed reef , with a couple sps

on my fowlr/corals my puff wont eat , maxspect razor 20k 160w fixture %100 blue, %40-80 white 48x48x20t tank fixture 6 inches of water

[gmann]

Blues @ 65%
whites @ 55-60%
green/ red @ 5%

Just bought T5s today to supplement, so will probably amp up blues to 70-75

[TheMikey]

I built a custom LED light for my 31gallon and just reduced my Actinics to 40% and my daylight to 18%. I think our hobby has significantly underestimated the power of LEDs.