Vortech MP40es Questions

Madreefer · #1 08-06-2010, 07:05 PM

So I ordered one of these from Ocean Aquatics. I have a 144G half circle tank. Right now there is 3 Hydor #4's in the tank. Will one MP40 do the trick and anybody with a bow front or circle tank care to post any input on results? And those with odd ball shaped tanks have any suggestions on placement?

Sunee · #2 08-06-2010, 08:11 PM

The Eco Smart manual is available on line and it has a section on suggested placement of the pump for various tank shapes. Naturally they suggest two - a master and a slave. I am still waiting for my pumps so have no personal experience on placement but I expect someone else will chaime in with their placement and how they work. Good luck!

Zoaelite · #3 08-06-2010, 08:17 PM

I'm running a single MP 40W on my 170g 6', it creates a very dramatic amount of flow but I will be purchasing a second one shortly. Ditch the korellias ASAP, Vortec is the way to go!

viperfish · #4 08-06-2010, 08:30 PM

I bought my MP40w ES last week. My tank is 150 Gal 48x30x24" tall, I was running two K4's and two Evo 1400's. I pulled the two K4's and I am currently running a single MP40 and I have the two Evo's connected to my Apex controller as a wavemaker. I will probably add a second MP40 eventually but for now it's doing a great job of moving water. If I put mine on short pulse mode it creates quite a wave across my tank... very impressive. I have been running mine on reef crest mode pretty much full time only to put it on short pulse when I want to show off, LOL. There are certainly a ton of more options when running two MP40's but a grand for two pumps is a lot to swallow at once.

mike31154 · #5 08-06-2010, 09:14 PM

Can't help with advice on placement in an odd shaped tank, my 77 is your standard rectangle so I have one MP40W ES at each end. I can pretty much assure you though that a single VorTech will be insufficient for most applications on a tank your size. You'll need to continue to supplement flow with several of your other pumps until you decide on a second VorTech. In addition, purchasing a wireless capable pump and not using the full features offered by the wireless control capabilities by having a second pump, would be a waste of money. The features and options with two or even three of these is mind boggling, almost too much to wrap your head around.

Due to the cost, I started with a single MP40W several years ago, just before the Gen 2 upgrade. I managed to snag a good deal on a second new one (Gen 2) from a fellow reefer on another forum who had a change of plans about a year after my initial purchase from J&L. A few bucks to upgrade the original to Gen 2 and I was away to the races. And of course a few months ago, I ordered a couple of the ES drivers to get the added features provided by the latest upgrade.

Madreefer · #6 08-06-2010, 11:56 PM

Thanks for your info guys. I'm looking forward to getting the powerheads out of my tank. Number one reason I chose to get the vortech over a aquacontroller. I'll get that later. I can always tell my wife that I cut one of my Hydors in half and put the motor on the outside.

mike31154 · #7 08-07-2010, 02:04 AM

Pretty sure once you get that bad boy in your system, you'll be scheming for the second, possibly even third.... The great thing about them is that you can also get an MP10W ES to work with the big guys. Getting all those 120V ac electrical cords from the other powerheads out of the water is another bonus.

Madreefer · #8 08-17-2010, 06:58 AM

Well after having this thing on for a few days now I really like it. I did end up keeping one of my Koralia's in the tank. The 2 together are working great. I will end up getting another one later on. I have been running it on Reef-Crest mode and having the Night mode come on at 9:00. Is the night mode supposed to be on for 14 hours? Becuase mine does not stay on for that long at all.

Sunee · #9 08-17-2010, 02:24 PM

Have you changed the night mode time to 14 hours in the configuration? The manual says the default time for night mode is only 10 hours, you have to change the configuration if you want it longer.

Madreefer · #10 08-17-2010, 02:28 PM

Quote:

Originally Posted by Sunee

Have you changed the night mode time to 14 hours in the configuration? The manual says the default time for night mode is only 10 hours, you have to change the configuration if you want it longer.

It does'nt even mention night mode in the manual I got with it. I read how to put it in to night mode on the net somewheres. Whats with these manufactures? Every gadget I seem to buy for my tank has crappy instructions or none at all.