Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > Buy/Sell/Trade > Buy/Sell/Trade (Aquatics hardware related only)

Reply
 
Thread Tools Display Modes
  #11  
Old 03-02-2021, 03:56 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

This is the most up-to-date-info
See first post for more info

Please PM your # Some prices negotiable

75g w/ghost overflow and stand $500.00 Will include Eheim 1262 if still available
Aqueon 75g black trim w/removable black corrugated plastic backdrop; magnet scraper friendly.
15” ghost overflow w/3 x 1” threaded bulkheads 2 adapted to 1-1/2” (1 plugged @ 1”). 1-1/2” Gate Valve. 3 x 1” slip bulkheads (NIB), 2 x removable weirs; different tooth heights for low or high flow. Second front box w/removable lid instead of weir.
Back box has 2 lids and a float switch to connect to your controller. With 1-1/2” drains I doubt this box would ever overflow. Rated @ 1600GPH
Over-the-back return plumbing is 1” pvc split to threaded 2 x twin 3/4” ‘Y’ locline w/round nozzles and spare set of locline assemblies for ease of cleaning swaps. 1” union check valve with spare body and O-rings.
Current plumbing is going to a remote sump. Everything is threaded and has unions so reconfiguring to your needs is no issue; nothing to cut apart.
Aqueon black pine stand w/some wire rack shelving and 4 x Duplex outlets (1 GFCI) w/2 x Power cords. Pull chain light fixture w/CFL bulb.
Well over $1500.00 to buy new

60g sump $250.00
I cut down a 90g. 48-1/4” x 18-1/4” x 19” tall with 1/2” pink styro and 1” square tubing base.
Tank is 3/8” glass; baffles are 1/4” glass.
Sections are;
3” drain which overflows to a 7” single sock tray w/removable acrylic base, 12” skimmer with 8” under sock for external or reactor pumps, over-under-over trap w/first baffle approx. 16-1/4” tall and 3rd approx. 15-1/4” tall. Trap spacing is 2-1/2” each and the return section is 18”.
With the return section running @ 10” the whole sump holds approx. 47g. Great for water changes without draining the DT.
Comes with Vertex magnetic 3-probe holder; 3 acrylic heater hangers in the bubble trap for Jagers, one holder has a 5 x 1/4” dosing tube rack; 3 x 7” felt socks; and a removable twin 120mm fan assembly (w/dc PS) which sits on top of the sock.
Comes with simple 1/4” acrylic skimmer stand 8-3/4” square x 7-3/4” tall for 8-1/2” running height. Can make another size for you.

36g bowfront and stand $125.00 Black trim. Black-painted back can be scraped off. Stock canopy w/8k 17w bulb; acrylic and eggcrate top also included.
Aqueon Espresso stand with single door (small chip on door). Some wire shelving.
Setup is 30” wide; tank is 20-3/4” tall; whole setup is 49” tall. Ends are 12” F-Back; center is 16-1/2”.
Can include Coralife 2 x 65watt power compact 6700k and twin moonlight fixture for another $50.00

20g and stand w/door $75.00
Quarantine setup with 100w heater, AQ50 filter, surface skimmer and covers to avoid 'jumpers' $120.00

20g and stand w/o door $60.00

28g mixing tank w/stand, MJ600 and MJ900 $60.00
Include Jager 100w and titanium ground probe $90.00

10g w/acrylic lid - cutouts for wiring - was topoff tank $15.00

10g needs top trim resealed - is loose right now $10.00

Lights

ATI 8x54 $500.00 firm - incl canopy $550.00
ATI Powermodule 8 x 54 watt. No LED/non-dimmable. Comes with hanging kit and will include flatbar to screw to ceiling joists, and power supply for cooling fans.
Acrylic splash guard.
Also comes with 4 BNIB fans and 1 BNIB ballast.
Very quiet fans.
Included 8 bulbs and 10 more lightly used to keep you going for at least another 2 years.
I'll teach you how I cut my annual bulb usage in half.

Canopy for above style light; home-made. Fits standard 75g 4’ tank with trim or eurobraced. Approx. 48-5/8” x 18-7/8”.
Open top; lights sits on 1/2” black weather-strip closed cell foam (upper, and lower to sit on tank).
Black glossy pine; bright white inside. 2 x 120mm inlet grills (left side back) and 1 x 120mm exhaust fan (right side back) w/power supply. Doors on each end and twin center doors with no center brace in the way. Mount for eheim autofeeder w/air hole for feeder fan. Cut-outs for over-the-back returns.
Fits lights 16-1/2” to 18-1/4” x 45-1/2” to 48-3/4”. 9-1/2” tall without black foam, with 6-1/2” tall door openings. End door openings 11” wide; front opening 36-1/4” wide. $100.00 or price drop with other purchase such as tank or light

Coralife Aqualight Dual 24w $90.00 w/ATI bulbs less than 1 month use

Coralife Lunar Aqualight 30” $50.00

Coralife Aqualight 24” 1 x 65watt Power Compact $25.00

Coralife LED Aqualight 30” $100.00

20” Canopy for 10g Free

24” Canopy for 20g tall $15.00

24” Canopy for 20g tall $10.00

24” Canopy for 20g tall Free

Power Compact 96watt 6700k square 4-pin bulbs Unknown condition Free

Pumps

Eheim Compact+ 600 $25.00ea - 1 left

Eheim Compact+1000 $15.00 - wire sleeve has come loose from housing - doesn't trip GFCI

Compact+ 3000 transfer pump w/hose and fittings $175.00

Eheim Universal 1262 $80.00

Eheim Universal 1262 $50.00 - cracked front housing but no leaks - not related to electrical

Universal 1262 impeller cover NIB $10.00

Universal 1260/1262 O-rings 2 pack NIB $10.00

Quiet One Pro 1200 $30.00

MJ600 $15.00

Heaters

Aqueon 10watt AQ10w very little use in acclimation buckets $10.00

-Eheim Jager
100watt NIB $32.00
100watt never submerged above water line $20.00
100watt used in mixing tank $15.00
200watt never submerged above water line $25.00 each 2 left

Floating thermometer free w/$10.00 purchase 2 available
Reply With Quote
  #12  
Old 03-11-2021, 01:23 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

This is the most up-to-date-info
See first post for more info

Please PM your # Some prices negotiable

75g w/ghost overflow and stand $500.00 Will include Eheim 1262 if still available
Aqueon 75g black trim w/removable black corrugated plastic backdrop; magnet scraper friendly.
15” ghost overflow w/3 x 1” threaded bulkheads 2 adapted to 1-1/2” (1 plugged @ 1”). 1-1/2” Gate Valve. 3 x 1” slip bulkheads (NIB), 2 x removable weirs; different tooth heights for low or high flow. Second front box w/removable lid instead of weir.
Back box has 2 lids and a float switch to connect to your controller. With 1-1/2” drains I doubt this box would ever overflow. Rated @ 1600GPH
Over-the-back return plumbing is 1” pvc split to threaded 2 x twin 3/4” ‘Y’ locline w/round nozzles and spare set of locline assemblies for ease of cleaning swaps. 1” union check valve with spare body and O-rings.
Current plumbing is going to a remote sump. Everything is threaded and has unions so reconfiguring to your needs is no issue; nothing to cut apart.
Aqueon black pine stand w/some wire rack shelving and 4 x Duplex outlets (1 GFCI) w/2 x Power cords. Pull chain light fixture w/CFL bulb.
Well over $1500.00 to buy new

60g sump $250.00
I cut down a 90g. 48-1/4” x 18-1/4” x 19” tall with 1/2” pink styro and 1” square tubing base.
Tank is 3/8” glass; baffles are 1/4” glass.
Sections are;
3” drain which overflows to a 7” single sock tray w/removable acrylic base, 12” skimmer with 8” under sock for external or reactor pumps, over-under-over trap w/first baffle approx. 16-1/4” tall and 3rd approx. 15-1/4” tall. Trap spacing is 2-1/2” each and the return section is 18”.
With the return section running @ 10” the whole sump holds approx. 47g. Great for water changes without draining the DT.
Comes with Vertex magnetic 3-probe holder; 3 acrylic heater hangers in the bubble trap for Jagers, one holder has a 5 x 1/4” dosing tube rack; 3 x 7” felt socks; and a removable twin 120mm fan assembly (w/dc PS) which sits on top of the sock.
Comes with simple 1/4” acrylic skimmer stand 8-3/4” square x 7-3/4” tall for 8-1/2” running height. Can make another size for you.

36g bowfront and stand $125.00 Black trim. Black-painted back can be scraped off. Stock canopy w/8k 17w bulb; acrylic and eggcrate top also included.
Aqueon Espresso stand with single door (small chip on door). Some wire shelving.
Setup is 30” wide; tank is 20-3/4” tall; whole setup is 49” tall. Ends are 12” F-Back; center is 16-1/2”.
Can include Coralife 2 x 65watt power compact 6700k and twin moonlight fixture for another $50.00

20g and stand w/door $75.00
Quarantine setup with 100w heater, AQ50 filter, surface skimmer and covers to avoid 'jumpers' $120.00

20g and stand w/o door $60.00

28g mixing tank w/stand, MJ600 and MJ900 $60.00
Include Jager 100w and titanium ground probe $90.00

10g w/acrylic lid - cutouts for wiring - was topoff tank $15.00

10g needs top trim resealed - is loose right now $10.00

Lights

ATI 8x54 $500.00 firm - incl canopy $550.00
ATI Powermodule 8 x 54 watt. No LED/non-dimmable. Comes with hanging kit and will include flatbar to screw to ceiling joists, and power supply for cooling fans.
Acrylic splash guard.
Also comes with 4 BNIB fans and 1 BNIB ballast.
Very quiet fans.
Included 8 bulbs and 10 more lightly used to keep you going for at least another 2 years.
I'll teach you how I cut my annual bulb usage in half.

Canopy for above style light; home-made. Fits standard 75g 4’ tank with trim or eurobraced. Approx. 48-5/8” x 18-7/8”.
Open top; lights sits on 1/2” black weather-strip closed cell foam (upper, and lower to sit on tank).
Black glossy pine; bright white inside. 2 x 120mm inlet grills (left side back) and 1 x 120mm exhaust fan (right side back) w/power supply. Doors on each end and twin center doors with no center brace in the way. Mount for eheim autofeeder w/air hole for feeder fan. Cut-outs for over-the-back returns.
Fits lights 16-1/2” to 18-1/4” x 45-1/2” to 48-3/4”. 9-1/2” tall without black foam, with 6-1/2” tall door openings. End door openings 11” wide; front opening 36-1/4” wide. $100.00 or price drop with other purchase such as tank or light

Coralife Aqualight Dual 24w $90.00 w/ATI bulbs less than 1 month use

Coralife Lunar Aqualight 30” $50.00

Coralife Aqualight 24” 1 x 65watt Power Compact $25.00

Coralife LED Aqualight 30” $100.00

20” Canopy for 10g Free

24” Canopy for 20g tall $15.00

24” Canopy for 20g tall $10.00

24” Canopy for 20g tall Free

Power Compact 96watt 6700k square 4-pin bulbs Unknown condition Free

Pumps

Eheim Compact+ 600 $25.00ea - 1 left

Eheim Compact+1000 $15.00 - wire sleeve has come loose from housing - doesn't trip GFCI

Compact+ 3000 transfer pump w/hose and fittings $175.00

Eheim Universal 1262 $80.00

Eheim Universal 1262 $50.00 - cracked front housing but no leaks - not related to electrical

Universal 1262 impeller cover NIB $10.00

Universal 1260/1262 O-rings 2 pack NIB $10.00

Quiet One Pro 1200 $30.00

MJ600 $15.00 PENDING

Heaters

Aqueon 10watt AQ10w very little use in acclimation buckets $10.00

-Eheim Jager
100watt NIB $32.00
100watt never submerged above water line $20.00 PENDING
100watt used in mixing tank $15.00 PENDING
200watt never submerged above water line $25.00 each 2 left

Floating thermometer free w/$10.00 purchase 2 available

Last edited by gregzz4; 03-11-2021 at 01:26 AM.
Reply With Quote
  #13  
Old 03-13-2021, 10:34 PM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

This is the most up-to-date-info
See first post for more info

Please PM your # Some prices negotiable

75g w/ghost overflow and stand $500.00 Will include Eheim 1262 if still available
Aqueon 75g black trim w/removable black corrugated plastic backdrop; magnet scraper friendly.
15” ghost overflow w/3 x 1” threaded bulkheads 2 adapted to 1-1/2” (1 plugged @ 1”). 1-1/2” Gate Valve. 3 x 1” slip bulkheads (NIB), 2 x removable weirs; different tooth heights for low or high flow. Second front box w/removable lid instead of weir.
Back box has 2 lids and a float switch to connect to your controller. With 1-1/2” drains I doubt this box would ever overflow. Rated @ 1600GPH
Over-the-back return plumbing is 1” pvc split to threaded 2 x twin 3/4” ‘Y’ locline w/round nozzles and spare set of locline assemblies for ease of cleaning swaps. 1” union check valve with spare body and O-rings.
Current plumbing is going to a remote sump. Everything is threaded and has unions so reconfiguring to your needs is no issue; nothing to cut apart.
Aqueon black pine stand w/some wire rack shelving and 4 x Duplex outlets (1 GFCI) w/2 x Power cords. Pull chain light fixture w/CFL bulb.
Well over $1500.00 to buy new

60g sump $250.00
I cut down a 90g. 48-1/4” x 18-1/4” x 19” tall with 1/2” pink styro and 1” square tubing base.
Tank is 3/8” glass; baffles are 1/4” glass.
Sections are;
3” drain which overflows to a 7” single sock tray w/removable acrylic base, 12” skimmer with 8” under sock for external or reactor pumps, over-under-over trap w/first baffle approx. 16-1/4” tall and 3rd approx. 15-1/4” tall. Trap spacing is 2-1/2” each and the return section is 18”.
With the return section running @ 10” the whole sump holds approx. 47g. Great for water changes without draining the DT.
Comes with Vertex magnetic 3-probe holder; 3 acrylic heater hangers in the bubble trap for Jagers, one holder has a 5 x 1/4” dosing tube rack; 3 x 7” felt socks; and a removable twin 120mm fan assembly (w/dc PS) which sits on top of the sock.
Comes with simple 1/4” acrylic skimmer stand 8-3/4” square x 7-3/4” tall for 8-1/2” running height. Can make another size for you.

36g bowfront and stand $125.00 Black trim. Black-painted back can be scraped off. Stock canopy w/8k 17w bulb; acrylic and eggcrate top also included.
Aqueon Espresso stand with single door (small chip on door). Some wire shelving.
Setup is 30” wide; tank is 20-3/4” tall; whole setup is 49” tall. Ends are 12” F-Back; center is 16-1/2”.
Can include Coralife 2 x 65watt power compact 6700k and twin moonlight fixture for another $50.00

20g and stand w/door $75.00
Quarantine setup with 100w heater, AQ50 filter, surface skimmer and covers to avoid 'jumpers' $120.00

20g and stand w/o door $60.00

28g mixing tank w/stand, MJ600 and MJ900 $60.00
Include Jager 100w and titanium ground probe $90.00

10g w/acrylic lid - cutouts for wiring - was topoff tank $15.00

10g needs top trim resealed - is loose right now $10.00

Lights

ATI 8x54 $500.00 firm - incl canopy $550.00
ATI Powermodule 8 x 54 watt. No LED/non-dimmable. Comes with hanging kit and will include flatbar to screw to ceiling joists, and power supply for cooling fans.
Acrylic splash guard.
Also comes with 4 BNIB fans and 1 BNIB ballast.
Very quiet fans.
Included 8 bulbs and 10 more lightly used to keep you going for at least another 2 years.
I'll teach you how I cut my annual bulb usage in half.

Canopy for above style light; home-made. Fits standard 75g 4’ tank with trim or eurobraced. Approx. 48-5/8” x 18-7/8”.
Open top; lights sits on 1/2” black weather-strip closed cell foam (upper, and lower to sit on tank).
Black glossy pine; bright white inside. 2 x 120mm inlet grills (left side back) and 1 x 120mm exhaust fan (right side back) w/power supply. Doors on each end and twin center doors with no center brace in the way. Mount for eheim autofeeder w/air hole for feeder fan. Cut-outs for over-the-back returns.
Fits lights 16-1/2” to 18-1/4” x 45-1/2” to 48-3/4”. 9-1/2” tall without black foam, with 6-1/2” tall door openings. End door openings 11” wide; front opening 36-1/4” wide. $100.00 or price drop with other purchase such as tank or light

Coralife Aqualight Dual 24w $90.00 w/ATI bulbs less than 1 month use

Coralife Lunar Aqualight 30” $50.00

Coralife Aqualight 24” 1 x 65watt Power Compact $25.00

Coralife LED Aqualight 30” $100.00

20” Canopy for 10g Free

24” Canopy for 20g tall $15.00

24” Canopy for 20g tall $10.00

24” Canopy for 20g tall Free

Power Compact 96watt 6700k square 4-pin bulbs Unknown condition Free

Pumps

Eheim Compact+ 600 $25.00ea - 1 left

Eheim Compact+1000 $15.00 - wire sleeve has come loose from housing - doesn't trip GFCI

Compact+ 3000 transfer pump w/hose and fittings $175.00

Eheim Universal 1262 $80.00

Eheim Universal 1262 $50.00 - cracked front housing but no leaks - not related to electrical

Universal 1262 impeller cover NIB $10.00

Universal 1260/1262 O-rings 2 pack NIB $10.00

Quiet One Pro 1200 $30.00

MJ600 SOLD

Heaters

Aqueon 10watt AQ10w very little use in acclimation buckets $10.00

-Eheim Jager
100watt NIB $32.00
100watt never submerged above water line SOLD
100watt used in mixing tank SOLD
200watt never submerged above water line $25.00 each 2 left

Floating thermometer free w/$10.00 purchase 2 available
Reply With Quote
  #14  
Old 03-14-2021, 10:46 PM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

This is the most up-to-date-info
See first post for more info

Please PM your # Some prices negotiable

75g w/ghost overflow and stand $500.00 Will include Eheim 1262 if still available
Aqueon 75g black trim w/removable black corrugated plastic backdrop; magnet scraper friendly.
15” ghost overflow w/3 x 1” threaded bulkheads 2 adapted to 1-1/2” (1 plugged @ 1”). 1-1/2” Gate Valve. 3 x 1” slip bulkheads (NIB), 2 x removable weirs; different tooth heights for low or high flow. Second front box w/removable lid instead of weir.
Back box has 2 lids and a float switch to connect to your controller. With 1-1/2” drains I doubt this box would ever overflow. Rated @ 1600GPH
Over-the-back return plumbing is 1” pvc split to threaded 2 x twin 3/4” ‘Y’ locline w/round nozzles and spare set of locline assemblies for ease of cleaning swaps. 1” union check valve with spare body and O-rings.
Current plumbing is going to a remote sump. Everything is threaded and has unions so reconfiguring to your needs is no issue; nothing to cut apart.
Aqueon black pine stand w/some wire rack shelving and 4 x Duplex outlets (1 GFCI) w/2 x Power cords. Pull chain light fixture w/CFL bulb.
Well over $1500.00 to buy new

60g sump SOLD


36g bowfront and stand $125.00 Black trim. Black-painted back can be scraped off. Stock canopy w/8k 17w bulb; acrylic and eggcrate top also included.
Aqueon Espresso stand with single door (small chip on door). Some wire shelving.
Setup is 30” wide; tank is 20-3/4” tall; whole setup is 49” tall. Ends are 12” F-Back; center is 16-1/2”.
Can include Coralife 2 x 65watt power compact 6700k and twin moonlight fixture for another $50.00

20g and stand w/door $75.00
Quarantine setup with 100w heater, AQ50 filter, surface skimmer and covers to avoid 'jumpers' $120.00

20g and stand w/o door $60.00

28g mixing tank w/stand, MJ600 and MJ900 $60.00
Include Jager 100w and titanium ground probe $90.00

10g w/acrylic lid - cutouts for wiring - was topoff tank $15.00

10g needs top trim resealed - is loose right now $10.00

Lights

ATI 8x54 $500.00 firm - incl canopy $550.00
ATI Powermodule 8 x 54 watt. No LED/non-dimmable. Comes with hanging kit and will include flatbar to screw to ceiling joists, and power supply for cooling fans.
Acrylic splash guard.
Also comes with 4 BNIB fans and 1 BNIB ballast.
Very quiet fans.
Included 8 bulbs and 10 more lightly used to keep you going for at least another 2 years.
I'll teach you how I cut my annual bulb usage in half.

Canopy for above style light; home-made. Fits standard 75g 4’ tank with trim or eurobraced. Approx. 48-5/8” x 18-7/8”.
Open top; lights sits on 1/2” black weather-strip closed cell foam (upper, and lower to sit on tank).
Black glossy pine; bright white inside. 2 x 120mm inlet grills (left side back) and 1 x 120mm exhaust fan (right side back) w/power supply. Doors on each end and twin center doors with no center brace in the way. Mount for eheim autofeeder w/air hole for feeder fan. Cut-outs for over-the-back returns.
Fits lights 16-1/2” to 18-1/4” x 45-1/2” to 48-3/4”. 9-1/2” tall without black foam, with 6-1/2” tall door openings. End door openings 11” wide; front opening 36-1/4” wide. $100.00 or price drop with other purchase such as tank or light

Coralife Aqualight Dual 24w $90.00 w/ATI bulbs less than 1 month use

Coralife Lunar Aqualight 30” $50.00

Coralife Aqualight 24” 1 x 65watt Power Compact $25.00

Coralife LED Aqualight 30” $100.00

20” Canopy for 10g Free

24” Canopy for 20g tall $15.00

24” Canopy for 20g tall $10.00

24” Canopy for 20g tall Free

Power Compact 96watt 6700k square 4-pin bulbs Unknown condition Free

Pumps

Eheim Compact+ 600 $25.00ea - 1 left

Eheim Compact+1000 $15.00 - wire sleeve has come loose from housing - doesn't trip GFCI

Compact+ 3000 transfer pump w/hose and fittings $175.00

Eheim Universal 1262 $80.00

Eheim Universal 1262 $50.00 - cracked front housing but no leaks - not related to electrical

Universal 1262 impeller cover NIB $10.00

Universal 1260/1262 O-rings 2 pack NIB $10.00

Quiet One Pro 1200 $30.00

MJ600 SOLD

Heaters

Aqueon 10watt AQ10w very little use in acclimation buckets $10.00

-Eheim Jager
100watt NIB $32.00
100watt never submerged above water line SOLD
100watt used in mixing tank SOLD
200watt never submerged above water line $25.00 each 2 left

Floating thermometer free w/$10.00 purchase 2 available
Reply With Quote
  #15  
Old 03-20-2021, 12:34 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

This is the most up-to-date-info
See first post for more info

Please PM your # Some prices negotiable

75g w/ghost overflow and stand $500.00 Will include Eheim 1262 if still available
Aqueon 75g black trim w/removable black corrugated plastic backdrop; magnet scraper friendly.
15” ghost overflow w/3 x 1” threaded bulkheads 2 adapted to 1-1/2” (1 plugged @ 1”). 1-1/2” Gate Valve. 3 x 1” slip bulkheads (NIB), 2 x removable weirs; different tooth heights for low or high flow. Second front box w/removable lid instead of weir.
Back box has 2 lids and a float switch to connect to your controller. With 1-1/2” drains I doubt this box would ever overflow. Rated @ 1600GPH
Over-the-back return plumbing is 1” pvc split to threaded 2 x twin 3/4” ‘Y’ locline w/round nozzles and spare set of locline assemblies for ease of cleaning swaps. 1” union check valve with spare body and O-rings.
Current plumbing is going to a remote sump. Everything is threaded and has unions so reconfiguring to your needs is no issue; nothing to cut apart.
Aqueon black pine stand w/some wire rack shelving and 4 x Duplex outlets (1 GFCI) w/2 x Power cords. Pull chain light fixture w/CFL bulb.
Well over $1500.00 to buy new

60g sump SOLD


36g bowfront and stand $125.00 Black trim. Black-painted back can be scraped off. Stock canopy w/8k 17w bulb; acrylic and eggcrate top also included.
Aqueon Espresso stand with single door (small chip on door). Some wire shelving.
Setup is 30” wide; tank is 20-3/4” tall; whole setup is 49” tall. Ends are 12” F-Back; center is 16-1/2”.
Can include Coralife 2 x 65watt power compact 6700k and twin moonlight fixture for another $50.00

20g and stand w/door $75.00
Quarantine setup with 100w heater, AQ50 filter, surface skimmer and covers to avoid 'jumpers' $120.00

20g and stand w/o door $60.00

28g mixing tank w/stand, MJ600 and MJ900 SOLD

10g w/acrylic lid - cutouts for wiring - was topoff tank SOLD

10g needs top trim resealed - is loose right now $10.00

Lights

ATI 8x54 $500.00 firm - incl canopy $550.00
ATI Powermodule 8 x 54 watt. No LED/non-dimmable. Comes with hanging kit and will include flatbar to screw to ceiling joists, and power supply for cooling fans.
Acrylic splash guard.
Also comes with 4 BNIB fans and 1 BNIB ballast.
Very quiet fans.
Included 8 bulbs and 10 more lightly used to keep you going for at least another 2 years.
I'll teach you how I cut my annual bulb usage in half.

Canopy for above style light; home-made. Fits standard 75g 4’ tank with trim or eurobraced. Approx. 48-5/8” x 18-7/8”.
Open top; lights sits on 1/2” black weather-strip closed cell foam (upper, and lower to sit on tank).
Black glossy pine; bright white inside. 2 x 120mm inlet grills (left side back) and 1 x 120mm exhaust fan (right side back) w/power supply. Doors on each end and twin center doors with no center brace in the way. Mount for eheim autofeeder w/air hole for feeder fan. Cut-outs for over-the-back returns.
Fits lights 16-1/2” to 18-1/4” x 45-1/2” to 48-3/4”. 9-1/2” tall without black foam, with 6-1/2” tall door openings. End door openings 11” wide; front opening 36-1/4” wide. $100.00 or price drop with other purchase such as tank or light

Coralife Aqualight Dual 24w $90.00 w/ATI bulbs less than 1 month use

Coralife Lunar Aqualight 30” $50.00

Coralife Aqualight 24” 1 x 65watt Power Compact $25.00

Coralife LED Aqualight 30” $100.00

20” Canopy for 10g Free

24” Canopy for 20g tall $15.00

24” Canopy for 20g tall $10.00

24” Canopy for 20g tall Free

Power Compact 96watt 6700k square 4-pin bulbs Unknown condition Free

Pumps

Eheim Compact+ 600 $25.00ea - 1 left

Eheim Compact+1000 $15.00 - wire sleeve has come loose from housing - doesn't trip GFCI

Compact+ 3000 transfer pump w/hose and fittings $175.00

Eheim Universal 1262 $80.00

Eheim Universal 1262 $50.00 - cracked front housing but no leaks - not related to electrical

Universal 1262 impeller cover NIB $10.00

Universal 1260/1262 O-rings 2 pack NIB $10.00

Quiet One Pro 1200 $30.00

MJ600 SOLD

Heaters

Aqueon 10watt AQ10w very little use in acclimation buckets $10.00

-Eheim Jager
100watt NIB $32.00
100watt never submerged above water line SOLD
100watt used in mixing tank SOLD
200watt never submerged above water line $25.00 each 2 left

Floating thermometer free w/$10.00 purchase 2 available
Reply With Quote
  #16  
Old 03-26-2021, 02:29 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

This is the most up-to-date-info
See first post for more info

Please PM your # Some prices negotiable

75g w/ghost overflow and stand $500.00 Will include Eheim 1262 if still available
Aqueon 75g black trim w/removable black corrugated plastic backdrop; magnet scraper friendly.
15” ghost overflow w/3 x 1” threaded bulkheads 2 adapted to 1-1/2” (1 plugged @ 1”). 1-1/2” Gate Valve. 3 x 1” slip bulkheads (NIB), 2 x removable weirs; different tooth heights for low or high flow. Second front box w/removable lid instead of weir.
Back box has 2 lids and a float switch to connect to your controller. With 1-1/2” drains I doubt this box would ever overflow. Rated @ 1600GPH
Over-the-back return plumbing is 1” pvc split to threaded 2 x twin 3/4” ‘Y’ locline w/round nozzles and spare set of locline assemblies for ease of cleaning swaps. 1” union check valve with spare body and O-rings.
Current plumbing is going to a remote sump. Everything is threaded and has unions so reconfiguring to your needs is no issue; nothing to cut apart.
Aqueon black pine stand w/some wire rack shelving and 4 x Duplex outlets (1 GFCI) w/2 x Power cords. Pull chain light fixture w/CFL bulb.
Well over $1500.00 to buy new


36g bowfront and stand $125.00 Black trim. Black-painted back can be scraped off. Stock canopy w/8k 17w bulb; acrylic and eggcrate top also included.
Aqueon Espresso stand with single door (small chip on door). Some wire shelving.
Setup is 30” wide; tank is 20-3/4” tall; whole setup is 49” tall. Ends are 12” F-Back; center is 16-1/2”.
Can include Coralife 2 x 65watt power compact 6700k and twin moonlight fixture for another $50.00

20g and stand w/door $50.00
AC50 and surface skimmer available for extra $

20g and stand w/o door $40.00
AC50 and surface skimmer available for extra $

10g needs top trim resealed - is loose right now $10.00

Lights

ATI 8x54 $500.00 firm - incl canopy $550.00
ATI Powermodule 8 x 54 watt. No LED/non-dimmable. Comes with hanging kit and will include flatbar to screw to ceiling joists, and power supply for cooling fans.
Acrylic splash guard.
Also comes with 4 BNIB fans and 1 BNIB ballast.
Very quiet fans.
Included 8 bulbs and 10 more lightly used to keep you going for at least another 2 years.
I'll teach you how I cut my annual bulb usage in half.

Canopy for above style light; home-made. Fits standard 75g 4’ tank with trim or eurobraced. Approx. 48-5/8” x 18-7/8”.
Open top; lights sits on 1/2” black weather-strip closed cell foam (upper, and lower to sit on tank).
Black glossy pine; bright white inside. 2 x 120mm inlet grills (left side back) and 1 x 120mm exhaust fan (right side back) w/power supply. Doors on each end and twin center doors with no center brace in the way. Mount for eheim autofeeder w/air hole for feeder fan. Cut-outs for over-the-back returns.
Fits lights 16-1/2” to 18-1/4” x 45-1/2” to 48-3/4”. 9-1/2” tall without black foam, with 6-1/2” tall door openings. End door openings 11” wide; front opening 36-1/4” wide. $100.00 or price drop with other purchase such as tank or light

Coralife Aqualight Dual 24w $90.00 w/ATI bulbs less than 1 month use

Coralife Lunar Aqualight 30” $50.00

Coralife Aqualight 24” 1 x 65watt Power Compact $25.00

Coralife LED Aqualight 30” $100.00

20” Canopy for 10g Free

24” Canopy for 20g tall $15.00

24” Canopy for 20g tall $10.00

24” Canopy for 20g tall Free

Power Compact 96watt 6700k square 4-pin bulbs Unknown condition Free

Pumps

Eheim Compact+ 600 $25.00ea - 1 left

Eheim Compact+1000 $15.00 - wire sleeve has come loose from housing - doesn't trip GFCI

Compact+ 3000 transfer pump w/hose and fittings $175.00

Eheim Universal 1262 $80.00

Eheim Universal 1262 $50.00 - cracked front housing but no leaks - not related to electrical

Universal 1262 impeller cover NIB $10.00

Universal 1260/1262 O-rings 2 pack NIB $10.00

Quiet One Pro 1200 $30.00

Heaters

Aqueon 10watt AQ10w very little use in acclimation buckets $10.00

-Eheim Jager
100watt NIB $32.00
200watt never submerged above water line $25.00 each 2 left

Floating thermometer free w/$10.00 purchase 2 available
Reply With Quote
  #17  
Old 04-16-2021, 05:08 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

This is the most up-to-date-info
See first post for more info

Please PM your # Some prices negotiable

75g w/ghost overflow and stand $400.00 Will include Eheim 1262 if still available
Aqueon 75g black trim w/removable black corrugated plastic backdrop; magnet scraper friendly.
15” ghost overflow w/3 x 1” threaded bulkheads 2 adapted to 1-1/2” (1 plugged @ 1”). 1-1/2” Gate Valve. 3 x 1” slip bulkheads (NIB), 2 x removable weirs; different tooth heights for low or high flow. Second front box w/removable lid instead of weir.
Back box has 2 lids and a float switch to connect to your controller. With 1-1/2” drains I doubt this box would ever overflow. Rated @ 1600GPH
Over-the-back return plumbing is 1” pvc split to threaded 2 x twin 3/4” ‘Y’ locline w/round nozzles and spare set of locline assemblies for ease of cleaning swaps. 1” union check valve with spare body and O-rings.
Current plumbing is going to a remote sump. Everything is threaded and has unions so reconfiguring to your needs is no issue; nothing to cut apart.
Aqueon black pine stand w/some wire rack shelving and 4 x Duplex outlets (1 GFCI) w/2 x Power cords. Pull chain light fixture w/CFL bulb.
Well over $1500.00 to buy new


36g bowfront and stand $125.00 Black trim. Black-painted back can be scraped off. Stock canopy w/8k 17w bulb; acrylic and eggcrate top also included.
Aqueon Espresso stand with single door (small chip on door). Some wire shelving.
Setup is 30” wide; tank is 20-3/4” tall; whole setup is 49” tall. Ends are 12” F-Back; center is 16-1/2”.
Can include Coralife 2 x 65watt power compact 6700k and twin moonlight fixture for another $50.00

20g and stand w/door $50.00
AC50 and surface skimmer available for extra $

20g and stand w/o door $40.00
AC50 and surface skimmer available for extra $

10g needs top trim resealed - is loose right now $10.00

Lights

ATI 8x54 $500.00 firm - incl canopy $550.00
ATI Powermodule 8 x 54 watt. No LED/non-dimmable. Comes with hanging kit and will include flatbar to screw to ceiling joists, and power supply for cooling fans.
Acrylic splash guard.
Also comes with 4 BNIB fans and 1 BNIB ballast.
Very quiet fans.
Included 8 bulbs and 10 more lightly used to keep you going for at least another 2 years.
I'll teach you how I cut my annual bulb usage in half.

Canopy for above style light; home-made. Fits standard 75g 4’ tank with trim or eurobraced. Approx. 48-5/8” x 18-7/8”.
Open top; lights sits on 1/2” black weather-strip closed cell foam (upper, and lower to sit on tank).
Black glossy pine; bright white inside. 2 x 120mm inlet grills (left side back) and 1 x 120mm exhaust fan (right side back) w/power supply. Doors on each end and twin center doors with no center brace in the way. Mount for eheim autofeeder w/air hole for feeder fan. Cut-outs for over-the-back returns.
Fits lights 16-1/2” to 18-1/4” x 45-1/2” to 48-3/4”. 9-1/2” tall without black foam, with 6-1/2” tall door openings. End door openings 11” wide; front opening 36-1/4” wide. $100.00 or price drop with other purchase such as tank or light

Coralife Aqualight Dual 24w $90.00 w/ATI bulbs less than 1 month use

Coralife Lunar Aqualight 30” $50.00

Coralife Aqualight 24” 1 x 65watt Power Compact $25.00

Coralife LED Aqualight 30” $100.00

20” Canopy for 10g Free

24” Canopy for 20g tall $15.00

24” Canopy for 20g tall $10.00

24” Canopy for 20g tall Free

Power Compact 96watt 6700k square 4-pin bulbs Unknown condition Free

Pumps

Eheim Compact+ 600 $25.00ea - 1 left

Eheim Compact+1000 $15.00 - wire sleeve has come loose from housing - doesn't trip GFCI

Compact+ 3000 transfer pump w/hose and fittings $175.00

Eheim Universal 1262 $80.00

Eheim Universal 1262 $50.00 - cracked front housing but no leaks - not related to electrical

Universal 1262 impeller cover NIB $10.00

Universal 1260/1262 O-rings 2 pack NIB $10.00

Quiet One Pro 1200 $30.00

Heaters

Aqueon 10watt AQ10w very little use in acclimation buckets $10.00

-Eheim Jager
100watt NIB $32.00
200watt never submerged above water line $25.00 each 2 left

Floating thermometer free w/$10.00 purchase 2 available
Reply With Quote
  #18  
Old 04-23-2021, 08:46 PM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

This is the most up-to-date-info
See first post for more info

Please PM your # Some prices negotiable

75g w/ghost overflow and stand $400.00 Will include Eheim 1262 if still available
Aqueon 75g black trim w/removable black corrugated plastic backdrop; magnet scraper friendly.
15” ghost overflow w/3 x 1” threaded bulkheads 2 adapted to 1-1/2” (1 plugged @ 1”). 1-1/2” Gate Valve. 3 x 1” slip bulkheads (NIB), 2 x removable weirs; different tooth heights for low or high flow. Second front box w/removable lid instead of weir.
Back box has 2 lids and a float switch to connect to your controller. With 1-1/2” drains I doubt this box would ever overflow. Rated @ 1600GPH
Over-the-back return plumbing is 1” pvc split to threaded 2 x twin 3/4” ‘Y’ locline w/round nozzles and spare set of locline assemblies for ease of cleaning swaps. 1” union check valve with spare body and O-rings.
Current plumbing is going to a remote sump. Everything is threaded and has unions so reconfiguring to your needs is no issue; nothing to cut apart.
Aqueon black pine stand w/some wire rack shelving and 4 x Duplex outlets (1 GFCI) w/2 x Power cords. Pull chain light fixture w/CFL bulb.
Well over $1500.00 to buy new


36g bowfront and stand $125.00 Black trim. Black-painted back can be scraped off. Stock canopy w/8k 17w bulb; acrylic and eggcrate top also included.
Aqueon Espresso stand with single door (small chip on door). Some wire shelving.
Setup is 30” wide; tank is 20-3/4” tall; whole setup is 49” tall. Ends are 12” F-Back; center is 16-1/2”.
Can include Coralife 2 x 65watt power compact 6700k and twin moonlight fixture for another $50.00

20g and stand w/door $50.00
AC50 and surface skimmer available for extra $

20g and stand w/o door $40.00
AC50 and surface skimmer available for extra $

10g needs top trim resealed - is loose right now $10.00

Lights

ATI 8x54 $500.00 firm - incl canopy $550.00
ATI Powermodule 8 x 54 watt. No LED/non-dimmable. Comes with hanging kit and will include flatbar to screw to ceiling joists, and power supply for cooling fans.
Acrylic splash guard.
Also comes with 4 BNIB fans and 1 BNIB ballast.
Very quiet fans.
Included 8 bulbs and 10 more lightly used to keep you going for at least another 2 years.
I'll teach you how I cut my annual bulb usage in half.

Canopy for above style light; home-made. Fits standard 75g 4’ tank with trim or eurobraced. Approx. 48-5/8” x 18-7/8”.
Open top; lights sits on 1/2” black weather-strip closed cell foam (upper, and lower to sit on tank).
Black glossy pine; bright white inside. 2 x 120mm inlet grills (left side back) and 1 x 120mm exhaust fan (right side back) w/power supply. Doors on each end and twin center doors with no center brace in the way. Mount for eheim autofeeder w/air hole for feeder fan. Cut-outs for over-the-back returns.
Fits lights 16-1/2” to 18-1/4” x 45-1/2” to 48-3/4”. 9-1/2” tall without black foam, with 6-1/2” tall door openings. End door openings 11” wide; front opening 36-1/4” wide. $100.00 or price drop with other purchase such as tank or light

Coralife Aqualight Dual 24w $90.00 w/ATI bulbs less than 1 month use

Coralife Lunar Aqualight 30” $50.00

Coralife Aqualight 24” 1 x 65watt Power Compact SOLD

Coralife LED Aqualight 30” $100.00

20” Canopy for 10g Free

24” Canopy for 20g tall $15.00

24” Canopy for 20g tall $10.00

24” Canopy for 20g tall Free

Power Compact 96watt 6700k square 4-pin bulbs Unknown condition Free

Pumps

Eheim Compact+ 600 $25.00ea - 1 left

Eheim Compact+1000 $15.00 - wire sleeve has come loose from housing - doesn't trip GFCI

Compact+ 3000 transfer pump w/hose and fittings $175.00

Eheim Universal 1262 $80.00

Eheim Universal 1262 $50.00 - cracked front housing but no leaks - not related to electrical

Universal 1262 impeller cover NIB $10.00

Universal 1260/1262 O-rings 2 pack NIB $10.00

Quiet One Pro 1200 $30.00

Heaters

Aqueon 10watt AQ10w very little use in acclimation buckets $10.00

-Eheim Jager
100watt NIB $32.00
200watt never submerged above water line $25.00 each 2 left

Floating thermometer free w/$10.00 purchase 2 available
Reply With Quote
  #19  
Old 04-24-2021, 03:12 AM
Frank Infanti Frank Infanti is offline
Member
 
Join Date: Jul 2015
Location: coquitlam
Posts: 33
Frank Infanti is on a distinguished road
Default

This isn't for me it's for my buddy. Regarding the tank & stand he's offering 275. No pump just the tank & stand

Sent from my SM-N9860 using Tapatalk
Reply With Quote
  #20  
Old 05-05-2021, 04:29 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

This is the most up-to-date-info
See first post for more info

Please PM your # Some prices negotiable

75g w/ghost overflow and stand $400.00 Will include Eheim 1262 if still available
Aqueon 75g black trim w/removable black corrugated plastic backdrop; magnet scraper friendly.
15” ghost overflow w/3 x 1” threaded bulkheads 2 adapted to 1-1/2” (1 plugged @ 1”). 1-1/2” Gate Valve. 3 x 1” slip bulkheads (NIB), 2 x removable weirs; different tooth heights for low or high flow. Second front box w/removable lid instead of weir.
Back box has 2 lids and a float switch to connect to your controller. With 1-1/2” drains I doubt this box would ever overflow. Rated @ 1600GPH
Over-the-back return plumbing is 1” pvc split to threaded 2 x twin 3/4” ‘Y’ locline w/round nozzles and spare set of locline assemblies for ease of cleaning swaps. 1” union check valve with spare body and O-rings.
Current plumbing is going to a remote sump. Everything is threaded and has unions so reconfiguring to your needs is no issue; nothing to cut apart.
Aqueon black pine stand w/some wire rack shelving and 4 x Duplex outlets (1 GFCI) w/2 x Power cords. Pull chain light fixture w/CFL bulb.
Well over $1500.00 to buy new


36g bowfront and stand $125.00 Black trim. Black-painted back can be scraped off. Stock canopy w/8k 17w bulb; acrylic and eggcrate top also included.
Aqueon Espresso stand with single door (small chip on door). Some wire shelving.
Setup is 30” wide; tank is 20-3/4” tall; whole setup is 49” tall. Ends are 12” F-Back; center is 16-1/2”.
Can include Coralife 2 x 65watt power compact 6700k and twin moonlight fixture for another $50.00

20g and stand w/door $50.00
AC50 and surface skimmer available for extra $

20g and stand w/o door $40.00
AC50 and surface skimmer available for extra $

10g needs top trim resealed - is loose right now $10.00

Lights

ATI 8x54 $500.00 firm - incl canopy $550.00
ATI Powermodule 8 x 54 watt. No LED/non-dimmable. Comes with hanging kit and will include flatbar to screw to ceiling joists, and power supply for cooling fans.
Acrylic splash guard.
Also comes with 4 BNIB fans and 1 BNIB ballast.
Very quiet fans.
Included 8 bulbs and 10 more lightly used to keep you going for at least another 2 years.
I'll teach you how I cut my annual bulb usage in half.

Canopy for above style light; home-made. Fits standard 75g 4’ tank with trim or eurobraced. Approx. 48-5/8” x 18-7/8”.
Open top; lights sits on 1/2” black weather-strip closed cell foam (upper, and lower to sit on tank).
Black glossy pine; bright white inside. 2 x 120mm inlet grills (left side back) and 1 x 120mm exhaust fan (right side back) w/power supply. Doors on each end and twin center doors with no center brace in the way. Mount for eheim autofeeder w/air hole for feeder fan. Cut-outs for over-the-back returns.
Fits lights 16-1/2” to 18-1/4” x 45-1/2” to 48-3/4”. 9-1/2” tall without black foam, with 6-1/2” tall door openings. End door openings 11” wide; front opening 36-1/4” wide. $100.00 or price drop with other purchase such as tank or light

Coralife Aqualight Dual 24w $90.00 w/ATI bulbs less than 1 month use

Coralife Lunar Aqualight 30” $50.00

Coralife LED Aqualight 30” $100.00

20” Canopy for 10g Free

24” Canopy for 20g tall $15.00

24” Canopy for 20g tall $10.00

24” Canopy for 20g tall Free

Power Compact 96watt 6700k square 4-pin bulbs Unknown condition Free

Pumps

Eheim Compact+ 600 $25.00ea - 1 left

Eheim Compact+1000 $15.00 - wire sleeve has come loose from housing - doesn't trip GFCI

Compact+ 3000 transfer pump w/hose and fittings $175.00

Eheim Universal 1262 $80.00

Eheim Universal 1262 $50.00 - cracked front housing but no leaks - not related to electrical

Universal 1262 impeller cover NIB $10.00

Universal 1260/1262 O-rings 2 pack NIB $10.00

Quiet One Pro 1200 $30.00

Heaters

Aqueon 10watt AQ10w very little use in acclimation buckets $10.00

-Eheim Jager
100watt NIB $32.00
200watt never submerged above water line $25.00 each 2 left

Floating thermometer free w/$10.00 purchase 2 available
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 08:42 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.