|
|
|
#21
09-15-2013, 07:00 PM
|
|||||
|
|||||
Ok I need help all done the overflow plumbing all done not glued yet anything missing? Only thing is should i add a ball valve on the other syphon some do others don't what u think?
  
__________________
Current tank---125 gallon mixed reef 60 gallon sump, Reef octopus nw200 skimmer, Rapid LEDs, Maxspec gyre, Mp10s, Fuge, Biweekly 20% WC, QT everything 
|
|
#22
09-15-2013, 08:49 PM
|
|||||
|
|||||
|
Curious if you have your return up into your overflow box? If so did you go with a dual durso? bean animal? If I was you I would go with a herbie.
Also I would consider putting a 1/2 - 3/4 plywood on the back of your stand to save your wall and paint to wherever you're placing your tank. If you do that which I highly suggest you should plumb your pvc against that back wall to save space and have a somewhat cleaner look. I would place the ball valve somewhere more accessible from under in your sump area might be tough reaching for that in a panic. (its happened) Also on your drains in your sump the down spout direct it right to the bottom maybe 3'' from the bottom to reduce splash and salt creep.
|
|
#23
09-15-2013, 10:08 PM
|
|||||
|
|||||
|
Yea after I'm done with the plumbing I'm going to close it all in with wood and make it look good, as for the returns there is 2 drilled holes on each end of the tank so the pump will plumb up to the returns there, and yea i was thinking about the placement of the ball valves but i can reach it from the side of the tank so ill see what i can figure out
__________________
Current tank---125 gallon mixed reef 60 gallon sump, Reef octopus nw200 skimmer, Rapid LEDs, Maxspec gyre, Mp10s, Fuge, Biweekly 20% WC, QT everything
|
|
#24
09-15-2013, 10:12 PM
|
|||||
|
|||||
|
have you done a test putting in your filter socks and taking them out with out touching your drain lines?
__________________
I have a little tank and little fishes! Hmmm..... Fishies That is what I keep telling myself.
|
|
#25
09-15-2013, 10:16 PM
|
|||||
|
|||||
|
Not yet but good idea
__________________
Current tank---125 gallon mixed reef 60 gallon sump, Reef octopus nw200 skimmer, Rapid LEDs, Maxspec gyre, Mp10s, Fuge, Biweekly 20% WC, QT everything
|
|
#26
09-18-2013, 04:11 AM
|
|||||
|
|||||
|
update
Well lots of progress got the stand all skinned and doors in and first coat of primer on ... also return pump and reactors came in gigity so the return plumbing can be finished
and i guess some pictures cause people like that ****...
__________________
Current tank---125 gallon mixed reef 60 gallon sump, Reef octopus nw200 skimmer, Rapid LEDs, Maxspec gyre, Mp10s, Fuge, Biweekly 20% WC, QT everything
|
|
#27
09-18-2013, 04:12 AM
|
|||||
|
|||||
|
Quote:
__________________
Guide to building super awesome rock structures / my tank journal http://www.canreef.com/vbulletin/sho...d.php?t=116410
|
|
#28
09-18-2013, 04:12 AM
|
|||||
|
|||||
  
__________________
Current tank---125 gallon mixed reef 60 gallon sump, Reef octopus nw200 skimmer, Rapid LEDs, Maxspec gyre, Mp10s, Fuge, Biweekly 20% WC, QT everything
|
|
#29
09-18-2013, 04:13 AM
|
|||||
|
|||||
 
__________________
Current tank---125 gallon mixed reef 60 gallon sump, Reef octopus nw200 skimmer, Rapid LEDs, Maxspec gyre, Mp10s, Fuge, Biweekly 20% WC, QT everything
|
|
#30
09-19-2013, 04:01 PM
|
|||||
|
|||||
|
Going to keep the inside white and paint the outside a flat black, Then finalize the plumbing then i should be able to get this thing out of the garage into the house at least
__________________
Current tank---125 gallon mixed reef 60 gallon sump, Reef octopus nw200 skimmer, Rapid LEDs, Maxspec gyre, Mp10s, Fuge, Biweekly 20% WC, QT everything
|
Linear Mode
