|
|
|
#1
11-24-2010, 06:09 PM
|
|||||
|
|||||
Silicone
whats the best silicone to use in an aquarium? My glass for my baffling is being cut right now And I wouldn't mind starting tonight. Dropping into Home Depot later today for some other stuff, so I wouldn't mind making it a one stop
|
|
#2
11-24-2010, 08:16 PM
|
||||
|
||||
|
I couldn't find any that said aquarium use when I was at Home Depot, but I got tubes of Rona's own silicone that used to say it was good for aquariums but now says it isn't.
It is supposed to be the exact same silicone in the tubes according to Rona, but the disclaimer in this case is a safety measure to avoid litigation according to the salesperson. I've used it to repair and reseal 3 tanks in the last year since the wording was changed and have had no problems to date. Many brands of silicone are not suitable though, like GE II which has something added that can kill off tank inhabitants I've been told.
|
|
#3
11-24-2010, 08:31 PM
|
|||||
|
|||||
|
Hey, I found a great page that explains silicones, the basics, applications and so on. I hope this link helps.
http://www.aquarium-pond-answers.com...-silicone.html
__________________
 Setup: 180G DT, 105G Refuge (approx. 300lbs LR, 150lbs Aragonite) Hardware: Super Reef Octopus SSS-3000, Tunze ATO, Mag 18 return, 2x MP40W, 2X Koralia 4's Wavemaker Lighting: 5ft Hamilton Belize Sun (2x250W MH, 2X80W T5HO) Type of Aquarium: mixed reef (SPS & LPS) with fish Dosing: Mg, Ca, Alk
|
|
#4
11-24-2010, 08:41 PM
|
|||||
|
|||||
|
GE 2000 is the best, commercial grade with no anti-mold additives.
Regarless, do not use any kitchen and tile stuff, due to anti-mold stuff. Most tank builers use it. Ken
|
|
#5
11-24-2010, 09:07 PM
|
|||||
|
|||||
|
Quote:
Salt and Fresh and never an issue. Mitch at Bowvalley uses GE2000, but sayes that silicone 1 is almost as good. Just make sure that you give it a few days to cure fully before adding water.
__________________
Ross 9 Gallon Nano, Modular LED Lights 14 Gallon BioCube w/ Rebel LED Lights 67 Gallon Mixed Reef, Modular LED Lights Send in the Clowns - Clown Fish Breeding 5 Gallon Fry Hatchery and 15 Gallon Clown Grow Out Tank
|
|
#7
11-24-2010, 09:20 PM
|
|||||
|
|||||
|
GE 1 100% silicone rubber is probably the easiest to find at a hardware store and should be more than sufficient for securing your sump baffles.
__________________
Spontaneously Purchased Scleractinian anonymous
|
|
#10
11-25-2010, 01:18 AM
|
|||||
|
|||||
|
BLUE one
 NOT the red one.
__________________
Ross 9 Gallon Nano, Modular LED Lights 14 Gallon BioCube w/ Rebel LED Lights 67 Gallon Mixed Reef, Modular LED Lights Send in the Clowns - Clown Fish Breeding 5 Gallon Fry Hatchery and 15 Gallon Clown Grow Out Tank
|
) I used it to make a sump without any problems.
Linear Mode
