|
|
|
#1
03-06-2009, 05:19 AM
|
|||||
|
|||||
75g equipment selloff
75g tank is now shutdown, the following equipment is now for sale:
Stand and Canopy [SOLD] Note, built for a 48x18 footprint, so would work well for a 90g. Stand is an internal 2x3 frame with a stained oak exterior. This was a DIY project I did, and consequently it is overbuilt like a brick outhouse.  The front has 3 cabinet doors for access, the back is open with a single centre post. You can fit a 40g, 30g or 20g tank inside for a sump.The canopy is 3/4" oak plywood stained to match. The whole front panel lifts up for access to feeding and etc. The hood itself is wired for 2 mogul halide sockets, has a parallel reflector, and sockets for 2 VHO's. It is ventilated by 2 variable speed Icecap fans with sensors mounted above the halides. The exterior is in reasonable shape, it could stand a new coat of varnish. The interior of the hood is something I would consider stripping out the hardware, and painting white. $150 for the stand and hood. Lighting - 2 x 250W probe start (ANSI M58) ballasts, $30 each or $50 for the pair. - 2 x 110W VHO ballast, $80 - 2 x 110W URI replacement actinics (never got around to using these, so they are brand new), $50 on their own, or FREE if you buy the ballast. Pump [SOLD] Little Giant 3 external pump, $70 Glass [SOLD] The tank itself is in rough shape. The glass is scratched from a previous owner who used silica sand for a deep sand bed. I didn't notice it too much if I kept the glass pristinely clean, but my opinion on this is that this tank's days as a display are done. It's developed a leak so it needs to be resealed were someone to use it as a refugium or basement sump or water change tank or whatever. FREE The sump is a 50g with baffles glued in and hole drilled for float valve for ATO. It does not fit inside the tank, I had run this in my previous house in a room behind the tank and in my current house I just had it in behind the tank. It is not pretty (it has a DIY repair job for example), but it is functional. $20 To sweeten the pot for the 75g tank, I'll let the sump go for free if you take the 75g tank at the same time. Pictures:     
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! Last edited by Delphinus; 03-09-2009 at 06:22 AM. 
|
|
#3
03-06-2009, 04:34 PM
|
||||
|
||||
Quote:
PM
__________________
"Government is the great fiction, through which everybody endeavors to live at the expense of everybody else." -- Frederick Bastiat
|
|
#4
03-06-2009, 04:36 PM
|
|||||
|
|||||
|
Tony, Ill take the sump.
__________________
- Greg 90G : Light - Tek 6xT5 | Skim - EuroReef RS135 | Flow - 2xVortech MP40W | Control - Reef Keeper 2
|
|
#5
03-06-2009, 07:38 PM
|
|||||
|
|||||
|
Interested in the hood and stand, but don't need the lights.
__________________
120g build thread 48g-upgraded to 120g old pics old 48g build thread Pics.... more recent pics seahorse pics
|
|
#6
03-06-2009, 11:14 PM
|
|||||
|
|||||
|
(Will be replying to PM's shortly...)
Tank, sump, stand, canopy, and pump are pending.. All lighting is currently available.
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee!
|
|
#7
03-09-2009, 06:19 AM
|
|||||
|
|||||
|
Bump
Tank, sump, stand, hood, and LG3 pump are sold. Lighting is still available. Prices adjusted.
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee!
|
Linear Mode
