Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Product Review and Equipment Forum > Filtration and Skimmer Specific

Reply
 
Thread Tools Display Modes
  #11  
Old 06-26-2013, 08:13 PM
Skimmerking's Avatar
Skimmerking Skimmerking is offline
acanthastrea freak
 
Join Date: Jun 2002
Location: Virden, Manitoba
Posts: 5,687
Skimmerking is on a distinguished road
Send a message via ICQ to Skimmerking Send a message via MSN to Skimmerking
Default

Quote:
Originally Posted by Seriak View Post
I have the 300 and I love it. It works great. I am sure the 350 would work really good as well but that's 3 pumps you need to maintain.
Agree with that. from experience the sicci pumps don't really have a good track record.

Quote:
Originally Posted by frizzo1983 View Post
Love my new ATI Powercone 250is very easy to use nice new pump and there was hardly a break in period. I am running it on a 380 gallon reef, pulls out some nasty stuff.

Remember if you decide to go with bubble king the pumps are very expensive to replace and parts are alot harder to aquire. Just my opinion
Frizzo Im not going to argue with you on your skimmer However, a lot of people will say they skimmer is a beast because I can't keep up with the nog it produces. Maybe because the skimmer can't keep up with the tank. Im not bashing your skimmer just making a observation WRT you stating that it pulls out some nasty stuff. Like how much are we talking that it pulls out.
Quote:
Originally Posted by sphelps View Post
From experience two things I would avoid:
1) Multiple pumps - more issues relating to consitant water level
2) Pumps mounted vertical - start up issues & propeller wear issues.

The diablo looks like the better choice of the three you posted but my advice would be to consider an alpha for you low end and BK double cone DC for your upper.
Steve has pretty much hit the nail on the head WRT the skimmer Sicci, Sedra caused a lot of headaches the ay they mounted there pumps on the skimmer as Sphelps stated. it seems that Ehiem as per the older Deltec's like the 701,702, 902 ,851 have had some great success with their pumps mounting it that way, Now that Deltec has their own line of pumps they continue to run the pumps that way and are having problems with their impeller prematurely wearing out.

I'm with Steve if you are not going to pull the trigger on a BK being a high end skimmer and a Alpha Vertex being the low end but beast of a skimmer. I would go with the DC pump skimmer as Steve pointed out. Im curious to here that how people think that BK parts are hard to get. If I need a piece I can call Jermey on RC and have a pump sent to me with in a week.

With Doug's skimmer the 300 its a beast, if you have seen it maybe take a look why not. Like our discuss last night I have a line on a EXT BK 300 for my 250 gal tank. Personally is that to much of a skimmer for that tank. It might be considering that Jason McK who had the 370 gal tank had one running on his tank.

over all opinion
DELTEC 902, with the self cleaning head. 2 nd hand thou
BK 300 if you can
ALpha 300
diablo with the DC pump.


WRT to the BK line the only thing that is impacting the Skimmer line is the PROLINE is pulling out of Royal Exclusive.

SO these are my opinions and experience that is it. please don't come on here and bask me due to a opinion I have. Remember this is Greg's thread. not a skimmer Bitching session.

Greg you are more then welcome to chat skimmers with me you long hair freak.. love ya bro.
__________________
180 starfire front, LPS, millipora
Doesn't matter how much you have been reading until you take the plunge.
You don't know as much as you think.
Reply With Quote
  #12  
Old 06-26-2013, 08:34 PM
frizzo1983 frizzo1983 is offline
Member
 
Join Date: May 2010
Location: Calgary
Posts: 92
frizzo1983 is on a distinguished road
Default

Well if you consider changing your cup once every 2 weeks a lot I guess so but last time I checked that is just regular routine maintenance!!! With the new controllable pump and the simple fact that it is not sicce that is a huge cost saving. I cant even tell you how many sicce pumps have been replaced on skimmers. And im sorry to say this but typically all product that are made in Germany will always stand the test of time. Although BK skimmers are in fact extreamly good skimmers god help your wallet if you ever have to replace any pieces in that pump. If you compare pricepoint to say deltec bk this skimmer will compete and probably out perform.
Reply With Quote
  #13  
Old 06-26-2013, 08:54 PM
sphelps's Avatar
sphelps sphelps is offline
Member
 
Join Date: May 2006
Location: Lyalta, East of Calgary
Posts: 4,777
sphelps is on a distinguished road
Default

I personally hate the SM300, the 250 is a much more stable skimmer. I swear the 300 was originally designed for one pump but later discovered it needed more punch so they threw on a second dinky pump help out. The result seems to be inconsistent water level probably relating to the smaller pump not handling the head pressure from the large skimmer. Three people I know personally with this skimmer had this issue. It's footprint is also pretty ridiculous.

Any skimmer with two or more pumps is simply a shortcut around producing the right pump for the body.

The way the market is trending I personally wouldn't invest in a new skimmer that doesn't use a DC pump.
Reply With Quote
  #14  
Old 06-26-2013, 10:07 PM
Skimmerking's Avatar
Skimmerking Skimmerking is offline
acanthastrea freak
 
Join Date: Jun 2002
Location: Virden, Manitoba
Posts: 5,687
Skimmerking is on a distinguished road
Send a message via ICQ to Skimmerking Send a message via MSN to Skimmerking
Default

Quote:
Originally Posted by sphelps View Post
I personally hate the SM300, the 250 is a much more stable skimmer. I swear the 300 was originally designed for one pump but later discovered it needed more punch so they threw on a second dinky pump help out. The result seems to be inconsistent water level probably relating to the smaller pump not handling the head pressure from the large skimmer. Three people I know personally with this skimmer had this issue. It's footprint is also pretty ridiculous.

Any skimmer with two or more pumps is simply a shortcut around producing the right pump for the body.

The way the market is trending I personally wouldn't invest in a new skimmer that doesn't use a DC pump.
good answer
However Steve look at the Deltec like the 701 with a single pump,
702 with a dual pump a amazing skimmer too.

the BK 300 Ext uses the 2500 pump I believe and has only the 1 pumps the internal one has 2 pumps doesn't make sense.
any of the deluxe models uses the RD 2000 and the RD 2500 200,300 ,400 Deluxe Int and EXt
__________________
180 starfire front, LPS, millipora
Doesn't matter how much you have been reading until you take the plunge.
You don't know as much as you think.

Last edited by Skimmerking; 06-26-2013 at 10:11 PM.
Reply With Quote
  #15  
Old 06-26-2013, 10:26 PM
sphelps's Avatar
sphelps sphelps is offline
Member
 
Join Date: May 2006
Location: Lyalta, East of Calgary
Posts: 4,777
sphelps is on a distinguished road
Default

Quote:
Originally Posted by Skimmer King View Post
good answer
However Steve look at the Deltec like the 701 with a single pump,
702 with a dual pump a amazing skimmer too.

the BK 300 Ext uses the 2500 pump I believe and has only the 1 pumps the internal one has 2 pumps doesn't make sense.
any of the deluxe models uses the RD 2000 and the RD 2500 200,300 ,400 Deluxe Int and EXt
I was referring to the super marine 300 which is an internal. I assumed that's the model you were referring to as that's what Doug was using last time I checked. The deluxe models are different but these days a little outdated to be purchased new for that kind of money.

I don't want to say too much on the deltecs but personally don't have the same feelings for them as you. The 702 breaks two of the rules I already mentioned as well as uses an outdated design. My hands on experience with the deltecs is the build quality lacks, supporting large pumps on the thin extruded plastic shell is a failure waiting to happen. I repaired a few units back in my aquarium biz days. Not sure if much has changed since then.
Reply With Quote
  #16  
Old 06-26-2013, 10:39 PM
lastlight's Avatar
lastlight lastlight is offline
Gold Member
 
Join Date: Jan 2006
Location: Calgary
Posts: 6,997
lastlight has a spectacular aura aboutlastlight has a spectacular aura aboutlastlight has a spectacular aura about
Default

not much has changed. their new pumps are total garbage. build quality of any bk and also my low end vertex omega are leaps and bounds beyond the old and also the new 'high end' deltecs. same extruded materials i had on my very first skimmer (asm)
__________________
Brett
My 67 392 225 101 94 34 97 404 28 93 209 gallon reef.
Reply With Quote
  #17  
Old 06-26-2013, 10:56 PM
The Grizz's Avatar
The Grizz The Grizz is offline
Member
 
Join Date: Oct 2009
Location: 15 min NE of Red Deer
Posts: 5,470
The Grizz will become famous soon enough
Default

Holy HELLicopter batman!! Can I unsubscribe from this thread!!

I didn't ask for a debate on BUBBLE KING, VERTEX or DELTEC.

I will never pay what I think is a stupid amount of money for a BK. I had a friend of mines BK 250 for 9 months and could never get is set right. He used it for another 6 month and also could not get it right so he switch out to an old Reef Octopus & has never looked back.

I currently am running the Deltec 702A skimmer and my main dislike is the pumps are a bit noisier then I like as they are out in the open in my living room. That is why I would like to get something using the DC pumps as there are very silent running.

I have decided that the XS model is not an option now after doing some research on the Sicci pumps that are on it.

So I'm down to just 2, the Diablo or the Pro SSS. So if anyone has some GOOD INFO ON THESE 2 skimmers lets hear it & and if you don't take the debate else where.


Stay clear..... this Bear bites off limbs!!
__________________
Feed the bear goodies, make a new friend, don't feed the bear...............

8' - 165gal Reef
DIY LED's Build
2012 Nano Contest Winner
Febuary 2013 POTM Winner
300 gal + 60 gal Complete DIY Build

Last edited by The Grizz; 06-26-2013 at 10:58 PM.
Reply With Quote
  #18  
Old 06-27-2013, 12:02 AM
H2o2 H2o2 is offline
Member
 
Join Date: Dec 2007
Location: winfield b.c.
Posts: 325
H2o2 is on a distinguished road
Default

I have the Diablo and love it dead quite fully adjustable DC pump and easy to adjust outlet also the soft start after a power outage allows the main return pump to get most of the water out of the sump before it is up to full speed
Reply With Quote
  #19  
Old 06-27-2013, 12:26 AM
Jakegr's Avatar
Jakegr Jakegr is offline
Member
 
Join Date: Aug 2011
Location: Saskatoon, SK
Posts: 264
Jakegr is on a distinguished road
Default

I bought a Reef Octopus Diablo DC170 from Reef Supplies a couple of months ago. It is the best skimmer I have ever had! Admittedly my skimmer history isn't extensive... only Deltec MC600, SWC 160, and Vertex IN-80, but so far the DC170 blows them all away. I have never owned a BK so I'm not commenting at all on that brand.

1) It is quiet. I have mine on full blast and I can only hear the sound of it bubbling. If you listen inside the stand there is a slight humming sound. I do have my own silencer on the output... Reef Octopus skimmers tend to make splashing noises, but that is easy fixed.

2) It is my first "set and forget" skimmer. Very stable. It reliably skims all day without needing adjustments. Only the SWC 160 comes close in terms of consistency (in my experience).

3) Big skimmer cup.

4) The gate valve is so easy to adjust in small increments. The SWC's gate valve wasn't as easily adjustable (harder to turn)... and I won't even discuss how big of a pain it was to adjust the IN-80 and MC-600.

Hope that helps you make a decision. Personally I don't think the Reef Octopus POV skimmers are worth the extra money if space is not an issue.

I'll be the first to admit the controllability feature of the DC pump isn't highly useful however don't think I have touched the controller for weeks now.

Last edited by Jakegr; 06-27-2013 at 12:29 AM.
Reply With Quote
  #20  
Old 06-27-2013, 01:13 AM
maron6977's Avatar
maron6977 maron6977 is offline
Member
 
Join Date: Sep 2006
Location: Cloverdale
Posts: 358
maron6977 is on a distinguished road
Default

I vote for the xs350 - just cause it looks badass !!!
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 01:12 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.