Too Much? - Page 2

CandyCane · #11 05-15-2011, 05:06 AM

Quote:

Originally Posted by ScubaSteve

Milli as in Acropora Millipora

I used a Coralife 150W MH with 2x65W actinics on it over a 20G with no sump for nearly a year without issue. As long as you slowly acclimate your livestock to that light level you should be fine. I never used a fan for cooling but it was near a window, so that probably helped.

BlazingArrow here on CanReef is now using this exact same equipment to keep basically the same you are wanting to keep. In there he has 2 candycanes, 2 hammers, a torch, a good number of SPS (which are doing well), an RBTA with two clowns, a wrasse, a goby and a shrimp... no sump. The only heat issue he ever had was when his stealth heater flipped out on him and dropped to cold then to super hot in a day. PM him for a discussion and some pics of his tank.

with no sump what did he use for filtration?

paddyob · #12 05-15-2011, 04:38 PM

The only concern I see is evaporation. My 20 was losing 2 liters a day with only a double PC light. Halides will definitely keep you topping up a lot. Adding a fan will help cool the tank but it also aids the evaporation process.

Go T5. Cooler. Less power to run them. Less evaporation.

Good luck.

mike31154 · #13 05-15-2011, 05:09 PM

I'd be looking at LED technology these days, especially for a Nano system.

ScubaSteve · #14 05-15-2011, 05:40 PM

Quote:

Originally Posted by CandyCane

with no sump what did he use for filtration?

Aquaclear 30 HOB filter. I still use this on my 40G until I can get my sump set-up.

Doug · #15 05-15-2011, 07:20 PM

Quote:

Originally Posted by mike31154

I'd be looking at LED technology these days, especially for a Nano system.

Yup. Just downsizing back to a 20g. Its lit with a SWC Extreme Cree LED fixture.
Of course verdict is still out on its performance in my sps nano.

FishyFishy! · #16 05-15-2011, 10:12 PM

I used that exact fixture only 2" above my 10G nano, with a 14K phoenix bulb, and a modded AC110 fuge filter and everything was growing amazing. Check out by build thread http://www.canreef.com/vbulletin/showthread.php?t=71793

CandyCane · #17 05-16-2011, 11:39 PM

LED's would be great but they're still very hard to come by in alberta. However I think T5's would work for my set up so thanks for the info everyone I'll be going with 4 T5's