Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Freshwater

Reply
 
Thread Tools Display Modes
  #1  
Old 04-30-2009, 02:58 AM
Delphinus's Avatar
Delphinus Delphinus is offline
Member
 
Join Date: Dec 2001
Location: Calgary
Posts: 12,896
Delphinus has a spectacular aura aboutDelphinus has a spectacular aura aboutDelphinus has a spectacular aura about
Send a message via MSN to Delphinus
Default Super high pH, don't know why

I'm running my 65g FW on tapwater (whichtests out at pH=7.5 and KH=11).

Substrate is a mixture of Flourite, Eco-Complete, and some kind of lava based substrate which is supposed to be good for plants. There's also several pieces of Malaysian driftwood.

I was about to look into getting CO2 running again, and thought I would take some tests to establish a baseline before adding any.

The pH probe shows pH=9.0.

Not believing that, I went out and bought a dripwise pH test kit and it tests out at 8.4.

What would be pulling the pH up so much?

I could filter some peat moss to bring down the pH, but I wonder if there's something I should be taking out of the tank as well.
__________________
-- Tony
My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee!
Reply With Quote
  #2  
Old 04-30-2009, 03:17 AM
Aquattro's Avatar
Aquattro Aquattro is offline
Just a guy..
 
Join Date: Aug 2001
Location: Victoria, BC
Posts: 18,053
Aquattro is a jewel in the roughAquattro is a jewel in the roughAquattro is a jewel in the roughAquattro is a jewel in the rough
Default

Tony, what does your tap water measure?
__________________
Brad
Reply With Quote
  #3  
Old 04-30-2009, 03:22 AM
Delphinus's Avatar
Delphinus Delphinus is offline
Member
 
Join Date: Dec 2001
Location: Calgary
Posts: 12,896
Delphinus has a spectacular aura aboutDelphinus has a spectacular aura aboutDelphinus has a spectacular aura about
Send a message via MSN to Delphinus
Default

The pH probe told me 7.6. The dripwise test kit showed me 7.4 (the lowest number on the scale, it reads from 7.4 to 8.8 or something like that). The pH probe is old and I was thinking it might be shot, but it tells me plausible numbers for the SW tanks (8.2, 8.3 and 8.4). But I hope it's wrong on the 9.0 reading, that seems way too high. Even if it's wrong though, it seems clear that something IS pulling up the pH somehow.
__________________
-- Tony
My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee!
Reply With Quote
  #4  
Old 04-30-2009, 05:45 AM
Myka's Avatar
Myka Myka is offline
Moderator
 
Join Date: Mar 2004
Location: Saskatoon, SK.
Posts: 11,268
Myka will become famous soon enough
Default

Are your plants or fish stressing at all? If not, I would leave it alone unless you can lower it and keep it steady. It's better to be steady at 9.0 then wavering between 7.0 and 9.0. What's your temp at? The CO2 in itself will lower the pH too, so keep that in mind as well.
__________________
~ Mindy

SPS fanatic.

Reply With Quote
  #5  
Old 04-30-2009, 07:05 AM
Delphinus's Avatar
Delphinus Delphinus is offline
Member
 
Join Date: Dec 2001
Location: Calgary
Posts: 12,896
Delphinus has a spectacular aura aboutDelphinus has a spectacular aura aboutDelphinus has a spectacular aura about
Send a message via MSN to Delphinus
Default

No, I don't think any of the fish or plants are stressing. There were a handful of neons added on the weekend that have been dropping off one by one but I've always heard neons are like that (one actually was DOA in the bag by the time it was home). I hear that neons like a pH range of 5.5 to 7.5 though so maybe this is the problem.

Yeah, I was thinking I could just add CO2 and the pH will probably fall to a more "normal" looking number but I'm concerned that there's something else going on here that I should try to find out about.

It's weird. I read up on lava substrate, Flourite and Eco-Complete and the claims there are that they are inert and won't affect pH. I read up on Malaysian driftwood and people were complaining about unable to RAISE pH because they lowered pH so much. What's left? The food I feed? The water evaporates and becomes way too hard? I practically did a 100% water change two weeks ago (long story, but basically had to do a tank reset - between the 200 Ameca splendens I kind of let get the population get out of hand over two years - and the two containers of fish food that got dumped into the sump - my 3 year old likes to "help" and this apparently happened when I was at work during a diaper change of the 1 year old so no adult noticed this happened until I was home hours later and the water was all smoky milky white smelling like a sewer and don't get me wrong I love my kids and parenthood is a wonderful adventure and blah blah blah I wouldn't give it up for anything it's awesome and he meant well by it and I really kind of don't want to talk about it but it did give me the kick in the rearend to get on with netting out those incredibly pregnant livebearers and take them into an LFS which is something I should have done way sooner than this anyhow). So um. Yeah. What was I talking about? Right, pH. pH high. Me no understand why pH so high.
__________________
-- Tony
My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee!
Reply With Quote
  #6  
Old 04-30-2009, 01:20 PM
Aquattro's Avatar
Aquattro Aquattro is offline
Just a guy..
 
Join Date: Aug 2001
Location: Victoria, BC
Posts: 18,053
Aquattro is a jewel in the roughAquattro is a jewel in the roughAquattro is a jewel in the roughAquattro is a jewel in the rough
Default

Quote:
Originally Posted by Delphinus View Post
pH high. Me no understand why pH so high.
Too much hydroxide...
__________________
Brad
Reply With Quote
  #7  
Old 04-30-2009, 01:32 PM
banditpowdercoat's Avatar
banditpowdercoat banditpowdercoat is offline
Member
 
Join Date: Oct 2007
Location: 100 mile hse BC
Posts: 2,568
banditpowdercoat is on a distinguished road
Default

I was gonna say to much Caffeine, but then remembered were talking about the TANK, not Tony
__________________
Dan Pesonen


Umm, a tank or 5
Reply With Quote
  #8  
Old 04-30-2009, 09:23 PM
Delphinus's Avatar
Delphinus Delphinus is offline
Member
 
Join Date: Dec 2001
Location: Calgary
Posts: 12,896
Delphinus has a spectacular aura aboutDelphinus has a spectacular aura aboutDelphinus has a spectacular aura about
Send a message via MSN to Delphinus
Default

I talked to a buddy at work who's into planted FW and getting into SW (I really need to get him onto here, so I'm not the only one putting canreef.com onto the firewall logs a million times per day), and anyhow, he told me his tank tests out at 8.3 before CO2 as well, and drops to around 7.5 when he runs CO2. He says now he's thinking of filtering through peat as well on account of that. I picked up some peat pellets yesterday and was thinking of running them in a phosban reactor in the sump (yeah I run a sumped FW tank .. I can't get out of the "this is how we do it in reef tanks" mentality when it comes to running my FW tank. Anyone else tempted to run 40x water turnover in their planted tanks????)

Sooo.. guess it's normal for tapwater to jump like this (well, "normal" for a data sample size of "2 whole tanks").. Weird, I wonder what's doing it, must be the accumulation of the salts after evap maybe..
__________________
-- Tony
My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee!

Last edited by Delphinus; 04-30-2009 at 09:25 PM.
Reply With Quote
  #9  
Old 05-01-2009, 01:45 AM
Myka's Avatar
Myka Myka is offline
Moderator
 
Join Date: Mar 2004
Location: Saskatoon, SK.
Posts: 11,268
Myka will become famous soon enough
Default

I haven't tested pH since I moved to Saskatoon, but my plants, shrimp, and fish (Cardinals, Espei, and BN Pleco) are all fine, so I doubt I will bother testing. Try to get some Cardinals instead, they seem to be a bit hardier provided they live 48 hours. Seems once they make it past that they are indestructible.
__________________
~ Mindy

SPS fanatic.

Reply With Quote
  #10  
Old 05-01-2009, 01:48 AM
Skimmerking's Avatar
Skimmerking Skimmerking is offline
acanthastrea freak
 
Join Date: Jun 2002
Location: Virden, Manitoba
Posts: 5,686
Skimmerking is on a distinguished road
Send a message via ICQ to Skimmerking Send a message via MSN to Skimmerking
Default

you could always add some peat moss Tony to lower it
__________________
180 starfire front, LPS, millipora
Doesn't matter how much you have been reading until you take the plunge.
You don't know as much as you think.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 05:49 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.