Reeflo Hammerhead/Barracuda question

Alberta-newb · #1 07-07-2013, 11:00 PM

Wondering if anyone has one of these handy for a measurement. After several hours googling I've had no luck. What I need is the distance from the center of the inlet down to the base (floor). I can't seem to find a diagram.

I would like to drill my sump for a bulkhead and tie a spare Dart in to circulate my fuges, sump and QT tanks. Once the big tank is ready upstairs I'll be replacing the Dart with a Hammerhead. Hate to drill the bulkhead to low to fit.

Thanks,

Francis

Evilweevil · #2 07-08-2013, 12:45 AM

I just measured mine from the base where it sits to the center of the inflow it is 3 3/8" hope that helps you ..... I am mounting mine with spa flex to give a little flexibility and vibration dampening

daplatapus · #3 07-08-2013, 01:27 AM

My hammerhead/barracuda measures 3 1/2" to center and my dart measures 3 1/8" to centre

Alberta-newb · #4 07-08-2013, 02:04 AM

Perfect, thank you both! Now to start drilling glass

Francis