Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > Buy/Sell/Trade > Buy/Sell/Trade (Aquatics hardware related only)

Reply
 
Thread Tools Display Modes
  #21  
Old 05-30-2021, 03:41 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

This is the most up-to-date-info
See first post for more info

Please PM your # Some prices negotiable

75g w/ghost overflow and stand $400.00 Will include Eheim 1262 if still available
Aqueon 75g black trim w/removable black corrugated plastic backdrop; magnet scraper friendly.
15” ghost overflow w/3 x 1” threaded bulkheads 2 adapted to 1-1/2” (1 plugged @ 1”). 1-1/2” Gate Valve. 3 x 1” slip bulkheads (NIB), 2 x removable weirs; different tooth heights for low or high flow. Second front box w/removable lid instead of weir.
Back box has 2 lids and a float switch to connect to your controller. With 1-1/2” drains I doubt this box would ever overflow. Rated @ 1600GPH
Over-the-back return plumbing is 1” pvc split to threaded 2 x twin 3/4” ‘Y’ locline w/round nozzles and spare set of locline assemblies for ease of cleaning swaps. 1” union check valve with spare body and O-rings.
Current plumbing is going to a remote sump. Everything is threaded and has unions so reconfiguring to your needs is no issue; nothing to cut apart.
Aqueon black pine stand w/some wire rack shelving and 4 x Duplex outlets (1 GFCI) w/2 x Power cords. Pull chain light fixture w/CFL bulb.
Well over $1500.00 to buy new


36g bowfront and stand $125.00 Black trim. Black-painted back can be scraped off. Stock canopy w/8k 17w bulb; acrylic and eggcrate top also included.
Aqueon Espresso stand with single door (small chip on door). Some wire shelving.
Setup is 30” wide; tank is 20-3/4” tall; whole setup is 49” tall. Ends are 12” F-Back; center is 16-1/2”.
Can include Coralife 2 x 65watt power compact 6700k and twin moonlight fixture for another $50.00

20g and stand w/door $50.00
AC50 and surface skimmer available for extra $

20g and stand w/o door $40.00
AC50 and surface skimmer available for extra $

10g needs top trim resealed - is loose right now $10.00

Lights

ATI 8x54 $500.00 firm - incl canopy $550.00
ATI Powermodule 8 x 54 watt. No LED/non-dimmable. Comes with hanging kit and will include flatbar to screw to ceiling joists, and power supply for cooling fans.
Acrylic splash guard.
Also comes with 4 BNIB fans and 1 BNIB ballast.
Very quiet fans.
Included 8 bulbs and 10 more lightly used to keep you going for at least another 2 years.
I'll teach you how I cut my annual bulb usage in half.

Canopy for above style light; home-made. Fits standard 75g 4’ tank with trim or eurobraced. Approx. 48-5/8” x 18-7/8”.
Open top; lights sits on 1/2” black weather-strip closed cell foam (upper, and lower to sit on tank).
Black glossy pine; bright white inside. 2 x 120mm inlet grills (left side back) and 1 x 120mm exhaust fan (right side back) w/power supply. Doors on each end and twin center doors with no center brace in the way. Mount for eheim autofeeder w/air hole for feeder fan. Cut-outs for over-the-back returns.
Fits lights 16-1/2” to 18-1/4” x 45-1/2” to 48-3/4”. 9-1/2” tall without black foam, with 6-1/2” tall door openings. End door openings 11” wide; front opening 36-1/4” wide. $100.00 or price drop with other purchase such as tank or light

Coralife Aqualight Dual 24w $90.00 w/ATI bulbs less than 1 month use

Coralife Lunar Aqualight 30” $50.00

Coralife LED Aqualight 30” $100.00

20” Canopy for 10g Free

24” Canopy for 20g tall $15.00

24” Canopy for 20g tall $10.00

24” Canopy for 20g tall Free

Power Compact 96watt 6700k square 4-pin bulbs Unknown condition Free

Pumps

Eheim Compact+ 600 $25.00ea - 1 left

Eheim Compact+1000 $15.00 - wire sleeve has come loose from housing - doesn't trip GFCI

Compact+ 3000 transfer pump w/hose and fittings $175.00

Eheim Universal 1262 $80.00

Eheim Universal 1262 $50.00 - cracked front housing but no leaks - not related to electrical

Universal 1262 impeller cover NIB $10.00

Universal 1260/1262 O-rings 2 pack NIB $10.00

Quiet One Pro 1200 $30.00

Heaters

Aqueon 10watt AQ10w very little use in acclimation buckets $10.00

-Eheim Jager
100watt NIB $32.00
200watt never submerged above water line $25.00 each 2 left

Floating thermometer free w/$10.00 purchase 2 available

All Parts prices negotiable
Reply With Quote
  #22  
Old 06-13-2021, 04:54 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

This is the most up-to-date-info
See first post for more info

Please PM your # Some prices negotiable

75g w/ghost overflow and stand $400.00 Will include Eheim 1262 if still available
Aqueon 75g black trim w/removable black corrugated plastic backdrop; magnet scraper friendly.
15” ghost overflow w/3 x 1” threaded bulkheads 2 adapted to 1-1/2” (1 plugged @ 1”). 1-1/2” Gate Valve. 3 x 1” slip bulkheads (NIB), 2 x removable weirs; different tooth heights for low or high flow. Second front box w/removable lid instead of weir.
Back box has 2 lids and a float switch to connect to your controller. With 1-1/2” drains I doubt this box would ever overflow. Rated @ 1600GPH
Over-the-back return plumbing is 1” pvc split to threaded 2 x twin 3/4” ‘Y’ locline w/round nozzles and spare set of locline assemblies for ease of cleaning swaps. 1” union check valve with spare body and O-rings.
Current plumbing is going to a remote sump. Everything is threaded and has unions so reconfiguring to your needs is no issue; nothing to cut apart.
Aqueon black pine stand w/some wire rack shelving and 4 x Duplex outlets (1 GFCI) w/2 x Power cords. Pull chain light fixture w/CFL bulb.
Well over $1500.00 to buy new


36g bowfront and stand $125.00 Black trim. Black-painted back can be scraped off. Stock canopy w/8k 17w bulb; acrylic and eggcrate top also included.
Aqueon Espresso stand with single door (small chip on door). Some wire shelving.
Setup is 30” wide; tank is 20-3/4” tall; whole setup is 49” tall. Ends are 12” F-Back; center is 16-1/2”.
Can include Coralife 2 x 65watt power compact 6700k and twin moonlight fixture for another $50.00

20g and stand w/door $50.00
AC50 and surface skimmer available for extra $

20g and stand w/o door $40.00
AC50 and surface skimmer available for extra $

10g needs top trim resealed - is loose right now $10.00

Lights

ATI 8x54 $500.00 firm - incl canopy $550.00
ATI Powermodule 8 x 54 watt. No LED/non-dimmable. Comes with hanging kit and will include flatbar to screw to ceiling joists, and power supply for cooling fans.
Acrylic splash guard.
Also comes with 4 BNIB fans and 1 BNIB ballast.
Very quiet fans.
Included 8 bulbs and 10 more lightly used to keep you going for at least another 2 years.
I'll teach you how I cut my annual bulb usage in half.

Canopy for above style light; home-made. Fits standard 75g 4’ tank with trim or eurobraced. Approx. 48-5/8” x 18-7/8”.
Open top; lights sits on 1/2” black weather-strip closed cell foam (upper, and lower to sit on tank).
Black glossy pine; bright white inside. 2 x 120mm inlet grills (left side back) and 1 x 120mm exhaust fan (right side back) w/power supply. Doors on each end and twin center doors with no center brace in the way. Mount for eheim autofeeder w/air hole for feeder fan. Cut-outs for over-the-back returns.
Fits lights 16-1/2” to 18-1/4” x 45-1/2” to 48-3/4”. 9-1/2” tall without black foam, with 6-1/2” tall door openings. End door openings 11” wide; front opening 36-1/4” wide. $100.00 or price drop with other purchase such as tank or light

Coralife Aqualight Dual 24w $90.00 w/ATI bulbs less than 1 month use

Coralife Lunar Aqualight 30” $50.00

Coralife LED Aqualight 30” $100.00

20” Canopy for 10g Free

24” Canopy for 20g tall $15.00

24” Canopy for 20g tall $10.00

24” Canopy for 20g tall Free

Power Compact 96watt 6700k square 4-pin bulbs Unknown condition Free

Pumps

Eheim Compact+ 600 $25.00ea - 1 left

Eheim Compact+1000 $15.00 - wire sleeve has come loose from housing - doesn't trip GFCI

Compact+ 3000 transfer pump w/hose and fittings $175.00

Eheim Universal 1262 $80.00

Eheim Universal 1262 $50.00 - cracked front housing but no leaks - not related to electrical

Universal 1262 impeller cover NIB $10.00

Universal 1260/1262 O-rings 2 pack NIB $10.00

Quiet One Pro 1200 $30.00

Heaters

Aqueon 10watt AQ10w very little use in acclimation buckets $10.00

-Eheim Jager
100watt NIB $32.00
200watt never submerged above water line $25.00 each 2 left

Floating thermometer free w/$10.00 purchase 2 available

All Parts prices negotiable
Reply With Quote
  #23  
Old 07-04-2021, 10:08 PM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

This is the most up-to-date-info
See first post for more info

Please PM your # Some prices negotiable

75g w/ghost overflow and stand $400.00 Will include Eheim 1262 if still available
Aqueon 75g black trim w/removable black corrugated plastic backdrop; magnet scraper friendly.
15” ghost overflow w/3 x 1” threaded bulkheads 2 adapted to 1-1/2” (1 plugged @ 1”). 1-1/2” Gate Valve. 3 x 1” slip bulkheads (NIB), 2 x removable weirs; different tooth heights for low or high flow. Second front box w/removable lid instead of weir.
Back box has 2 lids and a float switch to connect to your controller. With 1-1/2” drains I doubt this box would ever overflow. Rated @ 1600GPH
Over-the-back return plumbing is 1” pvc split to threaded 2 x twin 3/4” ‘Y’ locline w/round nozzles and spare set of locline assemblies for ease of cleaning swaps. 1” union check valve with spare body and O-rings.
Current plumbing is going to a remote sump. Everything is threaded and has unions so reconfiguring to your needs is no issue; nothing to cut apart.
Aqueon black pine stand w/some wire rack shelving and 4 x Duplex outlets (1 GFCI) w/2 x Power cords. Pull chain light fixture w/CFL bulb.
Well over $1500.00 to buy new


36g bowfront and stand $125.00 Black trim. Black-painted back can be scraped off. Stock canopy w/8k 17w bulb; acrylic and eggcrate top also included.
Aqueon Espresso stand with single door (small chip on door). Some wire shelving.
Setup is 30” wide; tank is 20-3/4” tall; whole setup is 49” tall. Ends are 12” F-Back; center is 16-1/2”.
Can include Coralife 2 x 65watt power compact 6700k and twin moonlight fixture for another $50.00

20g and stand w/door $50.00
AC50 and surface skimmer available for extra $

20g and stand w/o door $40.00
AC50 and surface skimmer available for extra $

10g needs top trim resealed - is loose right now $10.00

Lights

ATI 8x54 $500.00 firm - incl canopy $550.00
ATI Powermodule 8 x 54 watt. No LED/non-dimmable. Comes with hanging kit and will include flatbar to screw to ceiling joists, and power supply for cooling fans.
Acrylic splash guard.
Also comes with 4 BNIB fans and 1 BNIB ballast.
Very quiet fans.
Included 8 bulbs and 10 more lightly used to keep you going for at least another 2 years.
I'll teach you how I cut my annual bulb usage in half.

Canopy for above style light; home-made. Fits standard 75g 4’ tank with trim or eurobraced. Approx. 48-5/8” x 18-7/8”.
Open top; lights sits on 1/2” black weather-strip closed cell foam (upper, and lower to sit on tank).
Black glossy pine; bright white inside. 2 x 120mm inlet grills (left side back) and 1 x 120mm exhaust fan (right side back) w/power supply. Doors on each end and twin center doors with no center brace in the way. Mount for eheim autofeeder w/air hole for feeder fan. Cut-outs for over-the-back returns.
Fits lights 16-1/2” to 18-1/4” x 45-1/2” to 48-3/4”. 9-1/2” tall without black foam, with 6-1/2” tall door openings. End door openings 11” wide; front opening 36-1/4” wide. $100.00 or price drop with other purchase such as tank or light

Coralife Aqualight Dual 24w $90.00 w/ATI bulbs less than 1 month use

Coralife Lunar Aqualight 30” $50.00

Coralife LED Aqualight 30” $100.00

20” Canopy for 10g Free

24” Canopy for 20g tall $15.00

24” Canopy for 20g tall $10.00

24” Canopy for 20g tall Free

Power Compact 96watt 6700k square 4-pin bulbs Unknown condition Free

Pumps

Eheim Compact+ 600 $25.00ea - 1 left

Compact+ 3000 transfer pump w/hose and fittings SOLD

Eheim Universal 1262 $80.00

Eheim Universal 1262 $50.00 - cracked front housing but no leaks - not related to electrical

Universal 1262 impeller cover NIB $10.00

Universal 1260/1262 O-rings 2 pack NIB $10.00

Quiet One Pro 1200 SOLD

Heaters

Aqueon 10watt AQ10w very little use in acclimation buckets $10.00

-Eheim Jager
100watt SOLD
200watt never submerged above water line SOLD

Floating thermometer free w/$10.00 purchase 2 available

All Parts prices negotiable
Reply With Quote
  #24  
Old 08-13-2021, 12:23 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

This is the most up-to-date-info
See first post for more info

Please PM your # Some prices negotiable

75g w/ghost overflow and stand $400.00 Will include Eheim 1262 if still available
Aqueon 75g black trim w/removable black corrugated plastic backdrop; magnet scraper friendly.
15” ghost overflow w/3 x 1” threaded bulkheads 2 adapted to 1-1/2” (1 plugged @ 1”). 1-1/2” Gate Valve. 3 x 1” slip bulkheads (NIB), 2 x removable weirs; different tooth heights for low or high flow. Second front box w/removable lid instead of weir.
Back box has 2 lids and a float switch to connect to your controller. With 1-1/2” drains I doubt this box would ever overflow. Rated @ 1600GPH
Over-the-back return plumbing is 1” pvc split to threaded 2 x twin 3/4” ‘Y’ locline w/round nozzles and spare set of locline assemblies for ease of cleaning swaps. 1” union check valve with spare body and O-rings.
Current plumbing is going to a remote sump. Everything is threaded and has unions so reconfiguring to your needs is no issue; nothing to cut apart.
Aqueon black pine stand w/some wire rack shelving and 4 x Duplex outlets (1 GFCI) w/2 x Power cords. Pull chain light fixture w/CFL bulb.
Well over $1500.00 to buy new


36g bowfront and stand SOLD

20g and stand w/door $50.00

20g and stand w/o door $40.00

10g needs top trim resealed - is loose right now $10.00


Lights

ATI 8x54 $450.00 - incl canopy $500.00
ATI Powermodule 8 x 54 watt. No LED/non-dimmable. Comes with hanging kit and will include flatbar to screw to ceiling joists, and power supply for cooling fans.
Acrylic splash guard.
Also comes with 4 BNIB fans and 1 BNIB ballast.
Very quiet fans.
Included 8 bulbs and 10 more lightly used to keep you going for at least another 2 years.
I'll teach you how I cut my annual bulb usage in half.

Canopy for above style light; home-made. Fits standard 75g 4’ tank with trim or eurobraced. Approx. 48-5/8” x 18-7/8”.
Open top; lights sits on 1/2” black weather-strip closed cell foam (upper, and lower to sit on tank).
Black glossy pine; bright white inside. 2 x 120mm inlet grills (left side back) and 1 x 120mm exhaust fan (right side back) w/power supply. Doors on each end and twin center doors with no center brace in the way. Mount for eheim autofeeder w/air hole for feeder fan. Cut-outs for over-the-back returns.
Fits lights 16-1/2” to 18-1/4” x 45-1/2” to 48-3/4”. 9-1/2” tall without black foam, with 6-1/2” tall door openings. End door openings 11” wide; front opening 36-1/4” wide. $100.00 or price drop with other purchase such as tank or light

Coralife Aqualight Dual 24w $90.00 w/ATI bulbs less than 1 month use

Coralife Lunar Aqualight 30” $50.00

Coralife LED Aqualight 30” $100.00

20” Canopy for 10g Free

24” Canopy for 20g tall $15.00

24” Canopy for 20g tall $10.00

24” Canopy for 20g tall Free


Pumps

Eheim Universal 1262 $80.00

Eheim Universal 1262 $50.00 - cracked front housing but no leaks - not related to electrical

Universal 1262 impeller cover NIB $10.00

Universal 1260/1262 O-rings 2 pack NIB $10.00


Heaters

Aqueon 10watt AQ10w SOLD


Floating thermometer free w/$10.00 purchase 2 available

All Parts prices negotiable

Last edited by gregzz4; 08-13-2021 at 12:30 AM.
Reply With Quote
  #25  
Old 09-24-2021, 03:53 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

This is the most up-to-date-info
See first post for more info

Please PM your # Some prices negotiable

75g w/ghost overflow and stand $400.00 Will include Eheim 1262 if still available
Aqueon 75g black trim w/removable black corrugated plastic backdrop; magnet scraper friendly.
15” ghost overflow w/3 x 1” threaded bulkheads 2 adapted to 1-1/2” (1 plugged @ 1”). 1-1/2” Gate Valve. 3 x 1” slip bulkheads (NIB), 2 x removable weirs; different tooth heights for low or high flow. Second front box w/removable lid instead of weir.
Back box has 2 lids and a float switch to connect to your controller. With 1-1/2” drains I doubt this box would ever overflow. Rated @ 1600GPH
Over-the-back return plumbing is 1” pvc split to threaded 2 x twin 3/4” ‘Y’ locline w/round nozzles and spare set of locline assemblies for ease of cleaning swaps. 1” union check valve with spare body and O-rings.
Current plumbing is going to a remote sump. Everything is threaded and has unions so reconfiguring to your needs is no issue; nothing to cut apart.
Aqueon black pine stand w/some wire rack shelving and 4 x Duplex outlets (1 GFCI) w/2 x Power cords. Pull chain light fixture w/CFL bulb.
Well over $1500.00 to buy new

20g and stand w/door $50.00

20g and stand w/o door $40.00

10g needs top trim resealed - is loose right now $10.00


Lights

ATI 8x54 $450.00 - incl canopy $500.00
ATI Powermodule 8 x 54 watt. No LED/non-dimmable. Comes with hanging kit and will include flatbar to screw to ceiling joists, and power supply for cooling fans.
Acrylic splash guard.
Also comes with 4 BNIB fans and 1 BNIB ballast.
Very quiet fans.
Included 8 bulbs and 10 more lightly used to keep you going for at least another 2 years.
I'll teach you how I cut my annual bulb usage in half.

Canopy for above style light; home-made. Fits standard 75g 4’ tank with trim or eurobraced. Approx. 48-5/8” x 18-7/8”.
Open top; lights sits on 1/2” black weather-strip closed cell foam (upper, and lower to sit on tank).
Black glossy pine; bright white inside. 2 x 120mm inlet grills (left side back) and 1 x 120mm exhaust fan (right side back) w/power supply. Doors on each end and twin center doors with no center brace in the way. Mount for eheim autofeeder w/air hole for feeder fan. Cut-outs for over-the-back returns.
Fits lights 16-1/2” to 18-1/4” x 45-1/2” to 48-3/4”. 9-1/2” tall without black foam, with 6-1/2” tall door openings. End door openings 11” wide; front opening 36-1/4” wide.
$100.00 or price drop with other purchase such as tank or light

Coralife Aqualight Dual 24w $90.00 w/ATI bulbs less than 1 month use

Coralife Lunar Aqualight 30” $50.00

Coralife LED Aqualight 30” $100.00

20” Canopy for 10g Free

24” Canopy for 20g tall $15.00

24” Canopy for 20g tall $10.00

24” Canopy for 20g tall Free


Pumps

Eheim Universal 1262 $80.00

Eheim Universal 1262 $50.00 - cracked front housing but no leaks - not related to electrical

Universal 1262 impeller cover NIB $10.00

Universal 1260/1262 O-rings 2 pack NIB $10.00


Heaters


Floating thermometer free w/$10.00 purchase 2 available

All Parts prices negotiable
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 12:08 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.