|
|
|
#1
07-05-2014, 04:48 AM
|
|||||
|
|||||
Calcium reactor question
So my system is now over 300 gallons with the new frag tank my jetstream 1 is not keeping up any more with the system. I actually have 2 of these reactors so I could set up a second one but kinda worried about low ph from 2 reactors running. Anybody ever done this ? Or I was thinking about running the effluent from the first reactor thru number 2 kinda like a degassing chamber but not sure if I will really do much any thoughts ? Thanks Ryan
|
|
#2
07-05-2014, 04:54 AM
|
|||||
|
|||||
|
This is the calcium reactor
|
|
#3
07-05-2014, 03:31 PM
|
|||||
|
|||||
|
I personally just upgraded to a larger reactor and added an effluent chamber when my old one became too small for my system. However I got lucky and was able to find someone who was downgrading at the same time. So we basically just traded.
__________________
"We shall dive down through black abysses... and in that lair of the Deep Ones we shall dwell amidst wonder and glory forever." - H.P. Lovecraft Old 120gal Tank Journal New 225gal Tank Journal May 2010 TOTM The 10th Annual Prince George Reef Tank Tour
|
|
#4
07-05-2014, 04:07 PM
|
|||||
|
|||||
|
That's lucky good deal for you lol if I could afford it I would go get a large vertex reactor right now.
|
|
#6
07-05-2014, 07:18 PM
|
|||||
|
|||||
|
Not not my issue lol I have 2 full set ups other then your ph monitor
|
|
#7
07-25-2014, 03:48 PM
|
|||||
|
|||||
|
Update put the 2 reactors in line co2 only goes in the first reactor, co2 line on reactor 2 is plugged I use course arm media in reactor and run the ph pretty low reactor one ph 6.2 reactor 2 is at ph 6.4 this is working great tank is holding at 8.1 kh and 400ppm still can not get it to stay above 420 but don't mind manually dosing calcium chloride for that.
|
Linear Mode
