|
|
|
#151
02-10-2010, 09:14 PM
|
||||
|
||||
Quote:
My HOB CPR Fuge is now useless and grows nothing after bringing the pellets online. I will be removing it soon. 
|
|
#153
02-10-2010, 09:49 PM
|
||||
|
||||
|
Quote:
1 Week
|
|
#154
02-10-2010, 09:59 PM
|
||||
|
||||
|
Quote:
J/K I order 2L but not sure how much i am going to use for my 180G tank, any left over, i am willing to part for anyone want to use it right away at cost. Ian, do i start 500ml or 1L? I have 2 TLFs that i can use
|
|
#155
02-10-2010, 10:01 PM
|
|||||
|
|||||
|
I am about to pull the plug on my chaeto as well. Probably a good idea sooner rather than later because if the chaeto starts to starve and die off it will release nutients back into the system. I will be happy to see it go as chaeto has been frustrating to maintain for me. Plus now I can turn off the 'fuge light. Lights out for the 'fuge I guess :-). .. Say goodnight Gracie.
|
|
#156
02-10-2010, 10:40 PM
|
|||||
|
|||||
|
Quote:
__________________
Dan Pesonen Umm, a tank or 5
|
|
#157
02-10-2010, 10:42 PM
|
||||
|
||||
|
Quote:
+1, it would be very difficult to overdose the pellets!
|
|
#158
02-11-2010, 03:18 AM
|
||||
|
||||
|
Hey Guys , i e-mailed my questions to the web site stated on the package and here is his response.
One of the points he makes is that you can Not overdose, however i talked to one of the trusted long term J&L personnel and he told me that when he doubled the pellets he had a bacteria bloom in hie tank. Anywho below is the response to my questions. Morning ! The exact amount is hard to tell because of the bioload of the tank. You can not overdose the product. The guide line is 50-200ml of pellets per 100L of water The more water thrugh the pellets, the better. It is best to use the BioPellets in a fluidized bed filter, so yes it is best that they thumble. They can also being used in a canister filter, but keep the flow through in mind. The production of mulm is not necessory. It is a benefit if it happens because it will serve as food for small animals. If the pellets are in a fluidized bed filter, then no need to shake the pellet. If they are in a canister filter, I would say yes. Best Regards / Met vriendelijke groet, Dennis van Houten D. van Houten (Import-Export-Euro*Depot/Distribution) Postbus 5081 9700 GB Groningen, The Netherlands Tel: +31 (0)6 51717084 Fax: +31 (0)50 5777204 ----- Original Message ----- To: info@dvh-import.com Sent: Wednesday, February 10, 2010 11:37 AM Subject: BioPellets Good morning. Can you please elaborate on the exact use of the pellets in terms of the following The exact ammount of pellets per 100 liters The exact amount of flow thrugh the pellets Shuld the pellets thumble or be at rest Is the production of mulm necessory or not, some people report a lot of white mulm some none at all Should pellets be shaken regulary or left alone
|
|
#159
02-11-2010, 04:16 AM
|
|||||
|
|||||
|
Thanks for sharing that. Just as I thought, the more flow throughput the better the pellets will perform. At a high flow rate the mulm is not going to be visable as the fast moving water will carry away any particals shedding from the pellets.
So how many gph is everyone running through their reactor?
|
|
#160
02-11-2010, 04:20 AM
|
|||||
|
|||||
|
Quote:
 . I would recommend doing this if you are going to use a phosban. Enkmat works too.What I want to know is, what ever happened to the notion of having too much flow through a media reactor? I thought that too much flow would not allow for enough contact time for the bacteria to consume the passing nutrients? Last edited by kien; 02-11-2010 at 04:24 AM.
|
Linear Mode
