Tips to get stand level.

[Sasq40]

I'll try and measure how much it moves when I get home

Sent from my SM-N900W8 using Tapatalk

[hillegom]

Originally Posted by Sasq40

The way the stand is built there's no way to really get at the gap

Sent from my SM-N900W8 using Tapatalk

Well look at the top of the tank then, estimate how much it moves when you rock it

[Coral Hoarder]

How are we supposed to help you when you can't give use measurement s

[reefwars]

Originally Posted by Sasq40

So I built a stand made out of wood that's wrapped around a steel frame. The tank had a rip around the bottom and isn't sitting flat on my stand. It's On top of 3/8 plywood which is sitting on top of the metal stand. Now I'm assuming the metal is not flat but I figured the wood would allow the tank to sit flat. I was wrong and it rocks a bit. Can I throw a piece of cardboard under the tank to make up for the uneven corner?

Sent from my SM-N900W8 using Tapatalk

if the stand is unlevel and its only about 1 /16th or so then yes use foam to make up the difference.

[Sasq40]

Are you sure that's alright with a stand with a rim?

Sent from my SM-N900W8 using Tapatalk

[Sasq40]

Originally Posted by scott tang

How are we supposed to help you when you can't give use measurement s

That's my plan now that I'm home
, just draining the tank now

[WarDog]

I'm kinda confused...

The tank rocks when it sits on the wood on the stand?... or

The stand rocks on the floor?

[Sasq40]

It moves about a 1/16, maybe 3/32

Sent from my SM-N900W8 using Tapatalk

[Sasq40]

Originally Posted by WarDog

I'm kinda confused...

The tank rocks when it sits on the wood on the stand?... or

The stand rocks on the floor?

The tanks moving ontop of the stand.

Sent from my SM-N900W8 using Tapatalk

[WarDog]

Ahhh, I see.

+1 on the foam then.... carry on.