|
|
|
||||||||
| Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
|
Thread Tools | Display Modes |
|
#8
03-10-2012, 07:00 PM
|
|||||
|
|||||
I've been using KSP 7000 for 4 years. No problems. The thread on the output of the pump is NOT 1/2 npt. It is very close, but is metric. You can run a 1/2" npt tap, or you can use the barbs provide with the pump.
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode
