Quote:
Originally Posted by daplatapus
What are they like with head pressure though, that's the killer for me. Probably somewhere between 12-14' of head.
|
The output of this pump is 1" but I used a 1" to 1.5" bushing to convert it to 1.5" and its pumping water up a 1.5" line 6' into a manifold that T's off 9 times (8 tanks + external skimmer). Each tank has two 90 degree elbows before the water hits the tank. That is a ton of head pressure if you ask me.
Each tank has baffles so that I can separate the shrimp/crabs/snails/etc so its a flow through design. The bottleneck of my system is the 1/4" teeth in the baffles. The drains can handle more flow but the teeth can only handle so much.